.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Cold Circular Saw

          Machinelist: Cold Circular Saw


          Cold Circular Saw

          used Saws Cold Circular Saw TRENNJÄGER ST251HA


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3083 · Cold Circular Saw

          TRENNJÄGER - ST251HA - - unbekannt -

          Technical details
          saw blade diameter 275 mm︱cutting diameter 90 mm︱stroke mm︱capacity 45 degrees: flat 150 x 100 mm︱cutting speed 16/32 m/min︱miter cut 45 °︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            saw blade diameter 275 mm
            cutting diameter 90 mm
            capacity 45 degrees: flat 150 x 100 mm
            cutting speed 16/32 m/min
            miter cut 45 °
            Description :



        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw OPTIMUM CS 315


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-CS315 · Cold Circular Saw

          OPTIMUM - CS 315 - - NEU -

          Technical details
          saw blade diameter 315 mm︱cutting diameter 85 mm︱stroke mm︱mitter cutting - all-position ± 45 °︱turning speed range 19 / 38 1/min︱power requirement 0,75 / 1,5 kW︱coolant ︱voltage 400 V︱total power requirement 1,5 kW︱weight of the machine ca. 235 kg︱dimensions of the machine ca. 0,55 x 0,90 x 1,75 m︱
          - Coolant device - Machine base - without circular saw blade
            saw blade diameter 315 mm
            cutting diameter 85 mm
            mitter cutting - all-position ± 45 °
            turning speed range 19 / 38 1/min
            power requirement 0,75 / 1,5 kW
            voltage 400 V
            total power requirement 1,5 kW
            weight of the machine ca. 235 kg
            dimensions of the machine ca. 0,55 x 0,90 x 1,75 m
            Description :
            - Coolant device
            - Machine base
            - without circular saw blade


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw MEP TIGER 352


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5020231 · Cold Circular Saw

          MEP - TIGER 352 - - Neu -

          Technical details
          saw blade diameter 350 x 32 x 2,5 mm︱ 15/30/45/90 U/min︱vice 190 mm︱capacity 90 degrees: round 115 mm︱capacity 90 degrees: square 95 mm︱capacity 90 degrees: flat 180x95 mm︱ 90 mm︱ 90 mm︱ 110 mm︱ 95 mm︱ 125x95 mm︱ 110 mm︱ 95 mm︱ 125x95 mm︱total power requirement 1,8/2,5 kW︱weight 375 kg︱
            saw blade diameter 350 x 32 x 2,5 mm
            15/30/45/90 U/min
            vice 190 mm
            capacity 90 degrees: round 115 mm
            capacity 90 degrees: square 95 mm
            capacity 90 degrees: flat 180x95 mm
            90 mm
            90 mm
            110 mm
            95 mm
            125x95 mm
            110 mm
            95 mm
            125x95 mm
            total power requirement 1,8/2,5 kW
            weight 375 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw MEP TIGER 352 NC 5.0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5020391 · Cold Circular Saw

          MEP - TIGER 352 NC 5.0 - - Neu -

          Technical details
          saw blade diameter 350x32x2,5 mm︱ 15-90 U/min︱vice 190 mm︱capacity 90 degrees: round 115 mm︱capacity 90 degrees: square 95 mm︱capacity 90 degrees: flat 180x95 mm︱ 90 mm︱ 90 mm︱ 90x90 mm︱ 110 mm︱ 95 mm︱ 125x95 mm︱ 110 mm︱ 95 mm︱ 125x95 mm︱total power requirement 3 kW︱weight 685 kg︱Overall size 2050x1100x1800 mm︱
            saw blade diameter 350x32x2,5 mm
            15-90 U/min
            vice 190 mm
            capacity 90 degrees: round 115 mm
            capacity 90 degrees: square 95 mm
            capacity 90 degrees: flat 180x95 mm
            90 mm
            90 mm
            90x90 mm
            110 mm
            95 mm
            125x95 mm
            110 mm
            95 mm
            125x95 mm
            total power requirement 3 kW
            weight 685 kg
            Overall size 2050x1100x1800 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw MEP TIGER 372 SX EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5020402 · Cold Circular Saw

          MEP - TIGER 372 SX EVO - - Neu -

          Technical details
          saw blade diameter 370x32x3 mm︱ 15-150 U/min︱vice 190 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 110 mm︱capacity 90 degrees: flat 180x100 mm︱ 115 mm︱ 90 mm︱ 90x90 mm︱ 115 mm︱ 100 mm︱ 120x100 mm︱ 115 mm︱ 100 mm︱ 120x100 mm︱total power requirement 5,5 kW︱weight 615 kg︱Overall size 1400x1400x2000 mm︱
            saw blade diameter 370x32x3 mm
            15-150 U/min
            vice 190 mm
            capacity 90 degrees: round 120 mm
            capacity 90 degrees: square 110 mm
            capacity 90 degrees: flat 180x100 mm
            115 mm
            90 mm
            90x90 mm
            115 mm
            100 mm
            120x100 mm
            115 mm
            100 mm
            120x100 mm
            total power requirement 5,5 kW
            weight 615 kg
            Overall size 1400x1400x2000 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw MEP TIGER 352 SX EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5020407 · Cold Circular Saw

          MEP - TIGER 352 SX EVO - - Neu -

          Technical details
          saw blade diameter 350 x 32 x 2,5 mm︱ 15/30/45/90 U/min︱vice 190 mm︱capacity 90 degrees: round 115 mm︱capacity 90 degrees: square 95 mm︱capacity 90 degrees: flat 180x95 mm︱ 90 mm︱ 90 mm︱ 110 mm︱ 95 mm︱ 125x95 mm︱ 110 mm︱ 95 mm︱ 125x95 mm︱total power requirement 1,8/2,5 kW︱weight 410 kg︱
            saw blade diameter 350 x 32 x 2,5 mm
            15/30/45/90 U/min
            vice 190 mm
            capacity 90 degrees: round 115 mm
            capacity 90 degrees: square 95 mm
            capacity 90 degrees: flat 180x95 mm
            90 mm
            90 mm
            110 mm
            95 mm
            125x95 mm
            110 mm
            95 mm
            125x95 mm
            total power requirement 1,8/2,5 kW
            weight 410 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw MEP TIGER 352


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2160001 · Cold Circular Saw

          MEP - TIGER 352 - - NEU -

          Technical details
          saw blade diameter 350 x 32 mm︱cutting diameter 115 mm︱stroke -- mm︱capacity 90 degrees: square 95 mm︱capacity 90 degrees: flat 180 x 95 mm︱capacity 45 degrees: round li. 110 / re. 110 mm︱capacity 45 degrees: square li. 95 / re. 95 mm︱capacity 45 degrees: flat li. 125x95 / re . 125x95 mm︱capacity 60 degrees: round 90 mm︱capacity 60 degrees: square 90 mm︱capacity 60 degrees: flat 90 x 90 mm︱total power requirement 1,8 / 2,5 kW︱weight of the machine ca. 375 t︱dimensions of the machine ca. 700 x 900 x 1800 m︱
          -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with quick clamping (optional is a pneumatic one Vise = MA, available) is with screwed vise jaws Mistake. With their ribbing, these ensure optimal hold of the workpiece -Underframe with lockable door, chip drawer and removable Coolant pan with electric coolant pump -Chip removal brush
            saw blade diameter 350 x 32 mm
            cutting diameter 115 mm
            stroke -- mm
            capacity 90 degrees: square 95 mm
            capacity 90 degrees: flat 180 x 95 mm
            capacity 45 degrees: round li. 110 / re. 110 mm
            capacity 45 degrees: square li. 95 / re. 95 mm
            capacity 45 degrees: flat li. 125x95 / re . 125x95 mm
            capacity 60 degrees: round 90 mm
            capacity 60 degrees: square 90 mm
            capacity 60 degrees: flat 90 x 90 mm
            total power requirement 1,8 / 2,5 kW
            weight of the machine ca. 375 t
            dimensions of the machine ca. 700 x 900 x 1800 m
            Description :
            -The powerful, 2-stage gear was specially designed for cuts in solid material
            designed
            -The user has a total of 4 blade speeds for optimal adjustment
            the material available
            -The large bearing rotary table with internal table clamping and
            Precision stops at 0/45/60° ensure quick adjustability
            miter cuts
            -The vice with quick clamping (optional is a pneumatic one
            Vise = MA, available) is with screwed vise jaws
            Mistake. With their ribbing, these ensure optimal hold of the workpiece
            -Underframe with lockable door, chip drawer and removable
            Coolant pan with electric coolant pump
            -Chip removal brush


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw METALLKRAFT MKS 315 N Aktions-Set


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2160002 · Cold Circular Saw

          METALLKRAFT - MKS 315 N Aktions-Set - - NEU -

          Technical details
          saw blade diameter 315 mm︱cutting diameter 90 mm︱stroke -- mm︱mitre joint cuts -/+ degrees -45 + 45 Grad︱turning speeds 40 / 80 U/min︱weight of the machine ca. 165 kg︱dimensions of the machine ca. 1,0 x 1,15 x 1,48 m︱
          Manual metal circular saw MKS 315 N Action set / Item no. 3620303SET - two cutting speeds - Rotatable machine head 45° to the left and 45° to the right - Reduction gear, running quietly in an oil bath - automatic diaphragm coolant pump with coolant filter - Vice with counter vice, quick release and anti-burr jaws guarantees a precise and burr-free cut - Lateral material support arm with roller - Vice swivels 45° to the left and 45° to the right - Movable guard ensures optimal safety when cutting - Control handle with safety switch - Vice with counter vice, quick release and anti-burr jaws - Lateral material support arm with roller - Vise can be moved longitudinally and thus for longitudinal cuts and for suitable for slots 0° (round) solid material 55 mm 0° (round) tube 90 mm 0° (square) tube 80 x 80 mm 0° (rectangular) tube 115 x 70 mm -45° (round) solid material 50 mm -45° (round) tube 80 mm -45° (square) tube 70 x 70 mm -45° (rectangular) tube 70 x 70 mm +45° (round) solid material 50 mm +45° (round) tube 80 mm +45° (square) tube 70 x 70 mm +45° (rectangular) tube 70 x 70 mm
            saw blade diameter 315 mm
            cutting diameter 90 mm
            stroke -- mm
            mitre joint cuts -/+ degrees -45 + 45 Grad
            turning speeds 40 / 80 U/min
            weight of the machine ca. 165 kg
            dimensions of the machine ca. 1,0 x 1,15 x 1,48 m
            Description :
            Manual metal circular saw MKS 315 N Action set / Item no. 3620303SET

            - two cutting speeds
            - Rotatable machine head 45° to the left and 45° to the right
            - Reduction gear, running quietly in an oil bath
            - automatic diaphragm coolant pump with coolant filter
            - Vice with counter vice, quick release and anti-burr jaws
            guarantees a precise and burr-free cut
            - Lateral material support arm with roller
            - Vice swivels 45° to the left and 45° to the right
            - Movable guard ensures optimal safety when cutting
            - Control handle with safety switch
            - Vice with counter vice, quick release and anti-burr jaws
            - Lateral material support arm with roller
            - Vise can be moved longitudinally and thus for longitudinal cuts and for
            suitable for slots

            0° (round) solid material 55 mm
            0° (round) tube 90 mm
            0° (square) tube 80 x 80 mm
            0° (rectangular) tube 115 x 70 mm
            -45° (round) solid material 50 mm
            -45° (round) tube 80 mm
            -45° (square) tube 70 x 70 mm
            -45° (rectangular) tube 70 x 70 mm
            +45° (round) solid material 50 mm
            +45° (round) tube 80 mm
            +45° (square) tube 70 x 70 mm
            +45° (rectangular) tube 70 x 70 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw KALTENABCH SKL 400


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19792 · Cold Circular Saw

          KALTENABCH - SKL 400 - - ca. 1975 -

          Technical details
          saw blade diameter 400 mm︱cutting diameter 130 mm︱stroke 135 mm︱mitter cutting - all-position 0-45 °︱turning speed range 1420 / 2840 U/min︱capacity 45 degrees: square 110 mm︱capacity 45 degrees: flat 50 x 240 mm︱capacity 90 degrees: flat 95 x 240 mm︱capacity 90 degrees: round 130 mm︱capacity 90 degrees: square 120 mm︱voltage 400 V︱total power requirement 3,7 / 4,5 kW︱weight of the machine ca. 600 kg︱dimensions of the machine ca. 1,15 x 1,20 x 1,60 m︱
          - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping
            saw blade diameter 400 mm
            cutting diameter 130 mm
            stroke 135 mm
            mitter cutting - all-position 0-45 °
            turning speed range 1420 / 2840 U/min
            capacity 45 degrees: square 110 mm
            capacity 45 degrees: flat 50 x 240 mm
            capacity 90 degrees: flat 95 x 240 mm
            capacity 90 degrees: round 130 mm
            capacity 90 degrees: square 120 mm
            voltage 400 V
            total power requirement 3,7 / 4,5 kW
            weight of the machine ca. 600 kg
            dimensions of the machine ca. 1,15 x 1,20 x 1,60 m
            Description :
            - Serial-No.: 102752
            - cutting range round 130 mm
            - cutting range square 120 mm
            - cutting range flat 95 x 240 mm
            - vertical pneumatic clamping


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw HUVEMA TLG 350 A


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010046 · Cold Circular Saw

          HUVEMA - TLG 350 A - - 2019 -

          Technical details
          saw blade diameter 350 x 32 mm︱cutting diameter 125 mm︱Saw blade 125 mm︱turning speeds 3000 U/min︱capacity 90 degrees: round 125 mm︱capacity 45 degrees: round 105 mm︱capacity 90 degrees: square 110 x 110 mm︱capacity 45 degrees: square 85 x 85 mm︱capacity 90 degrees: flat 175 x 75 mm︱capacity 45 degrees: flat 100 x 80 mm︱voltage 400 V / 50 Hz︱total power requirement 1,5 kW︱weight of the machine ca. 150 Kg︱dimensions of the machine ca. 0,8 x 0,7 x 1,3 m︱
          • Cold circular saw for aluminium,
            saw blade diameter 350 x 32 mm
            cutting diameter 125 mm
            Saw blade 125 mm
            turning speeds 3000 U/min
            capacity 90 degrees: round 125 mm
            capacity 45 degrees: round 105 mm
            capacity 90 degrees: square 110 x 110 mm
            capacity 45 degrees: square 85 x 85 mm
            capacity 90 degrees: flat 175 x 75 mm
            capacity 45 degrees: flat 100 x 80 mm
            voltage 400 V / 50 Hz
            total power requirement 1,5 kW
            weight of the machine ca. 150 Kg
            dimensions of the machine ca. 0,8 x 0,7 x 1,3 m
            Description :
            • Cold circular saw for aluminium,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw HUVEMA TL 302


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010045 · Cold Circular Saw

          HUVEMA - TL 302 - - 2019 -

          Technical details
          saw blade diameter 300 x 32 mm︱cutting diameter 100 mm︱Saw blade 100 mm︱turning speeds 3000 U/min︱capacity 90 degrees: round 100 mm︱capacity 45 degrees: round 80 mm︱capacity 90 degrees: square 85 x 85 mm︱capacity 45 degrees: square 60 x 60 mm︱capacity 90 degrees: flat 120 x 50 mm︱capacity 45 degrees: flat 75 x 45 mm︱voltage 400 V / 50 Hz︱total power requirement 1,5 kW︱weight of the machine ca. 80 Kg︱dimensions of the machine ca. 0,6 x 0, 5 x 0,6 m︱
          • Cold circular saw for aluminium, • additional under frame, price: EUR 425.00 • additionally roller conveyor: • Height 850-1200 mm, • width 250 mm, • length 1000 mm, • with 4 posts, price: € 250,- . • Ditto with 2 posts, price: € 220,-
            saw blade diameter 300 x 32 mm
            cutting diameter 100 mm
            Saw blade 100 mm
            turning speeds 3000 U/min
            capacity 90 degrees: round 100 mm
            capacity 45 degrees: round 80 mm
            capacity 90 degrees: square 85 x 85 mm
            capacity 45 degrees: square 60 x 60 mm
            capacity 90 degrees: flat 120 x 50 mm
            capacity 45 degrees: flat 75 x 45 mm
            voltage 400 V / 50 Hz
            total power requirement 1,5 kW
            weight of the machine ca. 80 Kg
            dimensions of the machine ca. 0,6 x 0, 5 x 0,6 m
            Description :
            • Cold circular saw for aluminium,
            • additional under frame, price: EUR 425.00
            • additionally roller conveyor:
            • Height 850-1200 mm,
            • width 250 mm,
            • length 1000 mm,
            • with 4 posts, price: € 250,- .
            • Ditto with 2 posts, price: € 220,-


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw HUVEMA HU 370 PSK


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003387 · Cold Circular Saw

          HUVEMA - HU 370 PSK - - 2019 -

          Technical details
          saw-blade dia. 370 mm︱cutting capacity - round 115/ 90° mm︱cutting capacity - square 110 x 110 /90° mm︱cutting capacity - flat 110 x 110 / 90° mm︱cutting capacity - flat 100 x 100 / 45° mm︱cutting capacity - round 115 / 45° mm︱cutting capacity - square 100 x 100 /45° mm︱saw blade turning speeds 22 / 44 U/min︱voltage 400 V / 50 Hz︱Motor output 3 kW︱machine weight ab. 270 kg︱Dimensions (L/W/H) 980 x 790 x 780 mm︱
          • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right
            saw-blade dia. 370 mm
            cutting capacity - round 115/ 90° mm
            cutting capacity - square 110 x 110 /90° mm
            cutting capacity - flat 110 x 110 / 90° mm
            cutting capacity - flat 100 x 100 / 45° mm
            cutting capacity - round 115 / 45° mm
            cutting capacity - square 100 x 100 /45° mm
            saw blade turning speeds 22 / 44 U/min
            voltage 400 V / 50 Hz
            Motor output 3 kW
            machine weight ab. 270 kg
            Dimensions (L/W/H) 980 x 790 x 780 mm
            Description :
            • saw is fitted on a lower frame,
            • 2-step motor,
            • pneumatical quick clamping vise,
            • material back stop,
            • coolant device,
            • mitre ability: 40° left, 45° right



        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw HUVEMA HU 315 ASK


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003388 · Cold Circular Saw

          HUVEMA - HU 315 ASK - - 2016 -

          Technical details
          saw-blade dia. 315 mm︱cutting capacity - round 100/ 90° mm︱cutting capacity - square 90 x 90 /90° mm︱cutting capacity - flat 85 x 110 / 90° mm︱cutting capacity - flat 85 x 85 / 45° mm︱cutting capacity - round 100 / 45° mm︱cutting capacity - square 85 x 110 /45° mm︱saw blade turning speeds 25 / 50 U/min︱voltage 400 V / 50 Hz︱Motor output 1 kW︱machine weight ab. 240 kg︱Dimensions (L/W/H) 980 x 790 x 780 mm︱
          • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right
            saw-blade dia. 315 mm
            cutting capacity - round 100/ 90° mm
            cutting capacity - square 90 x 90 /90° mm
            cutting capacity - flat 85 x 110 / 90° mm
            cutting capacity - flat 85 x 85 / 45° mm
            cutting capacity - round 100 / 45° mm
            cutting capacity - square 85 x 110 /45° mm
            saw blade turning speeds 25 / 50 U/min
            voltage 400 V / 50 Hz
            Motor output 1 kW
            machine weight ab. 240 kg
            Dimensions (L/W/H) 980 x 790 x 780 mm
            Description :
            • saw is fitted on a lower frame,
            • 2-step motor,
            • pneumatical quick clamping vise,
            • material back stop,
            • coolant device,
            • mitre ability: 40° left, 45° right



        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw KASTO - Halbautomat KASTOradial U 10


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9164082 · Cold Circular Saw

          KASTO - Halbautomat - KASTOradial U 10 - - 2014 -

          Technical details
          saw blade diameter 350 mm︱cutting diameter 100 mm︱dimensions of saw-blade 350 x 32 x 2,5 mm︱height of material-table 900 mm︱cutting speed 38/76 m/min︱capacity 90 degrees: round 100 mm︱capacity 90 degrees: flat 170 x 90 mm︱capacity 90 degrees: square 90 x 90 mm︱capacity 45 degrees: round 100 mm︱capacity 45 degrees: flat 125 x 90 mm︱capacity 45 degrees: square 90 x 90 mm︱capacity 60 degrees: round 90,0 mm︱capacity 60 degrees: flat 90 x 90 mm︱capacity 60 degrees: square 90 x 90 mm︱clamping range max. 170 mm︱total power requirement 1,8 / 2,4 kW︱weight of the machine ca. 500 kg.︱dimensions of the machine ca. 1200 x 600 x 2200 mm︱
          The KASTOradial U 10 is a semi-automatic vertical circular saw with two Cutting speeds and steplessly adjustable saw feed for the universal use in workshop and production. The machines stands out through precise dovetail guides, robust gears and large cutting area. The easily swiveling upper part enables miter cuts of 45°(-) left and 60° (+) right. The pneumatic material clamping, Infinitely adjustable saw feed with height limitation allow a semi-automatic work cycle using a CE-compliant two-hand safety operation is triggered. Furnishing: - semi-automatic circular miter saw 90 / -45 / +45 / + 60 degrees - Vice with counter-clamping device for low-burr cuts - pneumatic material clamping - Cooling device - Infinitely adjustable saw feed with cutting height limitation - saw blade - Machine base cabinet - roller conveyors - Original operating instructions in German + CD Rom * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164082
            saw blade diameter 350 mm
            cutting diameter 100 mm
            dimensions of saw-blade 350 x 32 x 2,5 mm
            height of material-table 900 mm
            cutting speed 38/76 m/min
            capacity 90 degrees: round 100 mm
            capacity 90 degrees: flat 170 x 90 mm
            capacity 90 degrees: square 90 x 90 mm
            capacity 45 degrees: round 100 mm
            capacity 45 degrees: flat 125 x 90 mm
            capacity 45 degrees: square 90 x 90 mm
            capacity 60 degrees: round 90,0 mm
            capacity 60 degrees: flat 90 x 90 mm
            capacity 60 degrees: square 90 x 90 mm
            clamping range max. 170 mm
            total power requirement 1,8 / 2,4 kW
            weight of the machine ca. 500 kg.
            dimensions of the machine ca. 1200 x 600 x 2200 mm
            Description :

            The KASTOradial U 10 is a semi-automatic vertical circular saw with two
            Cutting speeds and steplessly adjustable saw feed for the
            universal use in workshop and production. The machines stands out
            through precise dovetail guides, robust gears and large
            cutting area. The easily swiveling upper part enables miter cuts
            of 45°(-) left and 60° (+) right. The pneumatic material clamping,
            Infinitely adjustable saw feed with height limitation allow a
            semi-automatic work cycle using a CE-compliant two-hand
            safety operation is triggered.

            Furnishing:
            - semi-automatic circular miter saw 90 / -45 / +45 / + 60 degrees
            - Vice with counter-clamping device for low-burr cuts
            - pneumatic material clamping
            - Cooling device
            - Infinitely adjustable saw feed with cutting height limitation
            - saw blade
            - Machine base cabinet
            - roller conveyors
            - Original operating instructions in German + CD Rom

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164082


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw RURACK VS 350HA


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-53 · Cold Circular Saw

          RURACK - VS 350HA - - 2012 -

          Technical details
          saw blade diameter 350 mm︱ ︱total power requirement 1,8 kW︱weight of the machine ca. 800 kg︱required space 800 x 1000 x 1850 mm︱
            saw blade diameter 350 mm
            total power requirement 1,8 kW
            weight of the machine ca. 800 kg
            required space 800 x 1000 x 1850 mm


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw RURACK VS 300


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9164090 · Cold Circular Saw

          RURACK - VS 300 - - 2011 -

          Technical details
          dimensions of saw-blade 250-300 x 40.0 mm︱cutting range 95.0 mm︱capacity 90 degrees: square 90 x 90 mm︱capacity 90 degrees: flat 125 x 90 mm︱capacity 45 degrees: round 95.0 mm︱capacity 45 degrees: square 85 x 85 mm︱capacity 45 degrees: flat 95 x 85 mm︱capacity 60 degrees: round 70.0 mm︱capacity 60 degrees: square 60 x 60 mm︱capacity 60 degrees: flat 75 x 60 mm︱work height max. 900 mm︱saw blade turning speeds 40 / 80 U/min︱voltage 400 V︱total power requirement 1.6 / 2.1 kW︱weight 230 kg︱range L-W-H 620 x 850 x 1600 mm︱
          ** including 2x heavy / robust roller conveyors (!!) Furnishing : - vertically guided cold circular saw - manual quick-clamping device - manual, stepless saw blade feed - simple & comfortable miter adjustment * Setting: 45-90-45-30° - generously sized gearboxes - 2x cutting speeds - Rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements (less than 1 m²) - Coolant device - Minimum quantity lubrication device (untested) - Operation manual * Special accessories included: - 1x feed roller conveyor.. L = 2.500 mm / W = 370 mm - 1x discharge roller conveyor with movable stop.. L = 5.000 mm / W = 370 mm * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164090
            dimensions of saw-blade 250-300 x 40.0 mm
            cutting range 95.0 mm
            capacity 90 degrees: square 90 x 90 mm
            capacity 90 degrees: flat 125 x 90 mm
            capacity 45 degrees: round 95.0 mm
            capacity 45 degrees: square 85 x 85 mm
            capacity 45 degrees: flat 95 x 85 mm
            capacity 60 degrees: round 70.0 mm
            capacity 60 degrees: square 60 x 60 mm
            capacity 60 degrees: flat 75 x 60 mm
            work height max. 900 mm
            saw blade turning speeds 40 / 80 U/min
            voltage 400 V
            total power requirement 1.6 / 2.1 kW
            weight 230 kg
            range L-W-H 620 x 850 x 1600 mm
            Description :
            ** including 2x heavy / robust roller conveyors (!!)

            Furnishing :
            - vertically guided cold circular saw
            - manual quick-clamping device
            - manual, stepless saw blade feed
            - simple & comfortable miter adjustment
            * Setting: 45-90-45-30°
            - generously sized gearboxes
            - 2x cutting speeds
            - Rotation compensation for long saw blade service life
            - Convenient saw blade change
            - High productivity with minimal space requirements (less than 1 m²)
            - Coolant device
            - Minimum quantity lubrication device (untested)
            - Operation manual

            * Special accessories included:
            - 1x feed roller conveyor.. L = 2.500 mm / W = 370 mm
            - 1x discharge roller conveyor with movable stop.. L = 5.000 mm / W = 370 mm

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164090


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw BEWO CPO 250 LT


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9164089 · Cold Circular Saw

          BEWO - CPO 250 LT - - 2007 -

          Technical details
          dimensions of saw-blade 250 mm︱cutting range 80,0 mm︱capacity 90 degrees: square 70 x 70 mm︱capacity 45 degrees: round 80,0 mm︱capacity 45 degrees: square 60 x 60 mm︱work height max. 900 mm︱saw blade turning speeds 20 / 40 U/min︱engine output 1400 / 2800 U/min.︱total power requirement 1,1 kW︱weight 175 kg︱range L-W-H 550 x 950 x 1800 mm︱
          Furnishing : - manual cross-cut/cold circular saw - for cutting profiles, pipes, solid materials - manual vice with star handle - including miter adjustment - ergonomic control handle - Pole-changing drive motor - 1x BEWO feed roller conveyor - Coolant device - Machine base * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164089
            dimensions of saw-blade 250 mm
            cutting range 80,0 mm
            capacity 90 degrees: square 70 x 70 mm
            capacity 45 degrees: round 80,0 mm
            capacity 45 degrees: square 60 x 60 mm
            work height max. 900 mm
            saw blade turning speeds 20 / 40 U/min
            engine output 1400 / 2800 U/min.
            total power requirement 1,1 kW
            weight 175 kg
            range L-W-H 550 x 950 x 1800 mm
            Description :
            Furnishing :
            - manual cross-cut/cold circular saw
            - for cutting profiles, pipes, solid materials
            - manual vice with star handle
            - including miter adjustment
            - ergonomic control handle
            - Pole-changing drive motor
            - 1x BEWO feed roller conveyor
            - Coolant device
            - Machine base

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164089


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw Bernardo KKS 315 L


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-ZA351 · Cold Circular Saw

          Bernardo - KKS 315 L - - 2007 -

          Technical details
          Saw blade diameter 315 mm ø︱Speed 53 - 105 RPM︱Machine weight 170 kg︱
            Saw blade diameter 315 mm ø
            Speed 53 - 105 RPM
            Machine weight 170 kg
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw MEP Cobra 350 SX


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-ZA367X · Cold Circular Saw

          MEP - Cobra 350 SX - - 2007 -

          Technical details
          Saw blade diameter 350 mm ø︱
          Saw blade diameter: 350 mm ø 2x left right miter 2x left/right angled miter Mitre sawing
            Saw blade diameter 350 mm ø
            Description :
            Saw blade diameter: 350 mm ø

            2x left right miter
            2x left/right angled miter
            Mitre sawing


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw MEP - Halbautomat TIGER 370 SX


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9164064 · Cold Circular Saw

          MEP - Halbautomat - TIGER 370 SX - - 2004 -

          Technical details
          cutting diameter 120 mm︱saw blade diameter 370 mm︱vice 190 mm︱capacity 90 degrees: flat 180 x 95 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: flat 125 x 95 mm︱capacity 60 degrees: round 90,0 mm︱capacity 60 degrees: flat 90 x 95 mm︱dimensions of saw-blade 370 x 32 x 2,5 mm︱cutting speed 15 - 150 m/min︱engine output 3,0 kW︱weight 640 kg︱range L-W-H 900 x 1500 x 1910 mm︱
          ** New price ~ 16.000 euros Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual
            cutting diameter 120 mm
            saw blade diameter 370 mm
            vice 190 mm
            capacity 90 degrees: flat 180 x 95 mm
            capacity 45 degrees: round 110 mm
            capacity 45 degrees: flat 125 x 95 mm
            capacity 60 degrees: round 90,0 mm
            capacity 60 degrees: flat 90 x 95 mm
            dimensions of saw-blade 370 x 32 x 2,5 mm
            cutting speed 15 - 150 m/min
            engine output 3,0 kW
            weight 640 kg
            range L-W-H 900 x 1500 x 1910 mm
            Description :
            ** New price ~ 16.000 euros

            Furnishing :
            - semi-automatic vertical metal circular saw
            - with miter adjustment 60 ° left / 45 ° right
            - swiveling control panel, front left
            - The saw head slides on linear double guides
            - pneumatic vice clamping
            - pneumatic saw blade feed, stepless
            - Infinitely variable speed adjustment from the saw blade
            - 2x replacement saw blade
            - Machine frame with coolant device
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw RURACK VS 350


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05553 · Cold Circular Saw

          RURACK - VS 350 - - 2003 -

          Technical details
          Rurack VS 350jaja
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Rurack VS 350
            ja
            ja
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw Fabris Italy Dico 350


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1743 · Cold Circular Saw

          Fabris Italy - Dico 350 - - 2001 -

          Technical details
          saw blade diameter 350 x 4,0 x 25,4 mm mm︱cutting diameter 120 mm︱weight of the machine ca. 150 kg︱speeds 4400 U/min︱voltage 400 V︱total power requirement 5,5 kW︱dimensions of the machine ca. TBH 1,3 x 1,0 x 1,8 m︱
          • Metal cutting saw (with cutting disc 350 x 4.0 x 25.4 mm steel) • Miter cut • Robust commercial and industrial design • Separation area max. 140x90 mm • Cutting disc diameter 350 mm x 4.0 x 25.4 mm • Power machine with (5.5 KW) 5,500 W drive cable, • Includes 3 pieces of cutting discs
            saw blade diameter 350 x 4,0 x 25,4 mm mm
            cutting diameter 120 mm
            weight of the machine ca. 150 kg
            speeds 4400 U/min
            voltage 400 V
            total power requirement 5,5 kW
            dimensions of the machine ca. TBH 1,3 x 1,0 x 1,8 m
            Description :
            • Metal cutting saw (with cutting disc 350 x 4.0 x 25.4 mm steel)
            • Miter cut
            • Robust commercial and industrial design
            • Separation area max. 140x90 mm
            • Cutting disc diameter 350 mm x 4.0 x 25.4 mm
            • Power machine with (5.5 KW) 5,500 W drive cable,
            • Includes 3 pieces of cutting discs



        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw MEP - Vollautomat TIGER 350 CNC FE


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9164079 · Cold Circular Saw

          MEP - Vollautomat - TIGER 350 CNC FE - - 2001 - MEP CNC

          Technical details
          saw blade diameter 350 mm︱cutting diameter 115 mm︱capacity 90 degrees: flat 180 x 95 mm︱capacity 45 degrees: round 95,0 mm︱capacity 45 degrees: flat 90 x 95 mm︱capacity 60 degrees: round 90,0 mm︱capacity 60 degrees: flat 90 x 95 mm︱turning speeds 15 - 30 - 45 - 90 U/min︱vice 190 mm︱Control MEP CNC ︱total power requirement 1,8 / 2,6 kW︱weight 710 kg︱range L-W-H 2000 x 1100 x 2000 mm︱
          Furnishing: - Fully automatic / vertically guided metal circular saw - with automatic material feed & quantity specification - with miter adjustment via large turntable - 32x cutting programs (quantity and section length) - continuous saw blade lowering - pneumatic material clamping - pivoting operation - Machine base - Safety device for feed device (hood) - many replacement saw blades (approx. 15x pieces) - Cooling device - original instruction manual * Machinevideo : https://www.youtube.com/watch?v=lzhNpAYTeEg
            saw blade diameter 350 mm
            cutting diameter 115 mm
            capacity 90 degrees: flat 180 x 95 mm
            capacity 45 degrees: round 95,0 mm
            capacity 45 degrees: flat 90 x 95 mm
            capacity 60 degrees: round 90,0 mm
            capacity 60 degrees: flat 90 x 95 mm
            turning speeds 15 - 30 - 45 - 90 U/min
            vice 190 mm
            Control MEP CNC
            total power requirement 1,8 / 2,6 kW
            weight 710 kg
            range L-W-H 2000 x 1100 x 2000 mm
            Description :
            Furnishing:
            - Fully automatic / vertically guided metal circular saw
            - with automatic material feed & quantity specification
            - with miter adjustment via large turntable
            - 32x cutting programs (quantity and section length)
            - continuous saw blade lowering
            - pneumatic material clamping
            - pivoting operation
            - Machine base
            - Safety device for feed device (hood)
            - many replacement saw blades (approx. 15x pieces)
            - Cooling device
            - original instruction manual

            * Machinevideo :
            https://www.youtube.com/watch?v=lzhNpAYTeEg


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Cold Circular Saw KALTENBACH KKS 400 H


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06272 · Cold Circular Saw

          KALTENBACH - KKS 400 H - - 2001 -

          Technical details
          saw blade diameter 400 mm︱miter .Kühlung ︱weight of the machine ca. 1 t︱number 4 Stück
            saw blade diameter 400 mm
            miter .
            Kühlung
            weight of the machine ca. 1 t
            number 4 Stück


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   


          Find a cold circular saw to increase productivity
          Find a cold circular saw and much more at LagerMaschinen

          A cold circular saw is an extremely functional machine for those in the industrial metalworking sector. There are a number of advantages to cold sawing. The machine operates by transferring heat away from both the blade and the material being cut - which means no excess heat is produced during the cutting process - eliminating cooling time and increasing productivity. Also the absence of heat when using a cold circular saw means a decrease in rust and staining of cut materials.

          A cold circular saw is a multifunctional tool for your business

          Cold circular saws are usually differentiated by the type of blade they employ. The most common are HSS (high speed steel) or TCT (tungsten carbide tipped) which are used respectively for cutting different types of metals. A cold circular saw is a crucial piece of equipment for business owners who require a very high rate of production and output. A cold circular saw offers the best cost per cut ratio when compared with other methods such as hot or abrasive sawing.

          Save time and money shopping for used machines at LagerMaschinen

          Buying used machinery is a business savvy solution. Staying on the cutting edge of technology is both expensive and time consuming. You don’t' have to sacrifice quality when it comes to buying used machines such as a cold circular saw. Find everything you need for your business at LagerMaschinen which offers a wide range of machines to suit any budget or specification. Find your next circular cold saw based on price or location all from the comfort of your home or office.