.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Rubber processing

          Machinelist: Rubber processing


          Plants, complete

          used Rubber processing Plants, complete HAN S LASER OP Maskenanlage


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211102 · Plants, complete

          HAN S LASER - OP Maskenanlage - - ca. 2021 -

          Technical details
          machine measurements 6.850 x 3.600 x 1.900 mm︱machine weight 5.000 kg︱power capacity 9 kW︱
          Condition: used - as good as new unit is still completely packed Specification: Medical surgical mask system complete Consisting of: - See sketches in the attachment Summary of the equipment: This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth. The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly line for collection. - CE certified is available - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm - Weight approx.: 5,000 kg - Paint finish: RAL 9003 - Voltage: 220V AC, 50 Hz - Total power approx.: 9 kW
            machine measurements 6.850 x 3.600 x 1.900 mm
            machine weight 5.000 kg
            power capacity 9 kW
            Description :
            Condition: used - as good as new
            unit is still completely packed

            Specification: Medical surgical mask system complete

            Consisting of:
            - See sketches in the attachment

            Summary of the equipment:
            This machine is mainly used for automatic forming of plane mask:
            the whole roll of cloth is driven by roller after being unrolled,
            and the cloth is folded and wrapped automatically.
            The nose bridge strip is rolled up for traction and unrolled.
            After cutting with a fixed length, it is imported into the edge cloth.
            The two sides are welded to the seal by ultrasonic welding.
            The mask was transported to two mask ear belt welding stations
            by the assembly line, and the mask was finally formed by ultrasonic
            welding.
            After the mask is made, it is transported to the flat belt line
            through the assembly line for collection.

            - CE certified is available
            - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm
            - Weight approx.: 5,000 kg
            - Paint finish: RAL 9003
            - Voltage: 220V AC, 50 Hz
            - Total power approx.: 9 kW



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete HAN S LASER FFP 2 Maskenanlage N95


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211101 · Plants, complete

          HAN S LASER - FFP 2 Maskenanlage N95 - - ca. 2019 -

          Technical details
          machine measurements 9.657 x 1.472 x 1.985 mm︱machine weight -- kg︱power capacity -- kW︱
          Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled
            machine measurements 9.657 x 1.472 x 1.985 mm
            machine weight -- kg
            power capacity -- kW
            Description :
            Condition: used - as good as new

            Specification: FFP 2 N95 mask system complete

            Consisting of:
            - see sketches in the plant
            - cycle time approx.: 35 - 50 pieces/min
            - not CE certified
            - Space requirement approx.: 9,657 x 1,472 x 1,985 mm
            - Completely assembled



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete K-W-H Langel Filtersysteme Signa 18 / VEH 7500-C2


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G230102 · Plants, complete

          K-W-H Langel Filtersysteme - Signa 18 / VEH 7500-C2 - - 2018 -

          Technical details
          machine measurements -- mm︱machine weight -- kg︱power capacity 7,5 kW︱
          Condition: used Specification: cartridge filter system for adjacent fan type: KWH-SIGA 18 with exhaust air system VEH 7500-C2 for transport of dry air without dust content or only with low dust content - used - year of construction: 2018 - Cartridge filter system type: KWH-SIMMA 18 - Fan in sound insulation bonnet type: VEH 7500-C2 - Motor power: 7,5 kW - Air volume: 7,500 m³/h - Negative pressure: 1,600 Pa
            machine measurements -- mm
            machine weight -- kg
            power capacity 7,5 kW
            Description :
            Condition: used

            Specification: cartridge filter system for adjacent fan
            type: KWH-SIGA 18 with exhaust air system VEH 7500-C2
            for transport of dry air without dust content
            or only with low dust content
            - used

            - year of construction: 2018
            - Cartridge filter system type: KWH-SIMMA 18
            - Fan in sound insulation bonnet type: VEH 7500-C2
            - Motor power: 7,5 kW
            - Air volume: 7,500 m³/h
            - Negative pressure: 1,600 Pa



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete GERLACH Maschinenbau Heissluft Shock Kanal 111


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G200301 · Plants, complete

          GERLACH Maschinenbau - Heissluft Shock Kanal 111 - - 2015 -

          Technical details
          machine measurements 3.000 mm︱machine weight -- kg︱power capacity 90 kW︱
            machine measurements 3.000 mm
            machine weight -- kg
            power capacity 90 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete HANS VON DER HEYDE Pultrusions-/Heizlinie


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G200701 · Plants, complete

          HANS VON DER HEYDE - Pultrusions-/Heizlinie - - 2015 -

          Technical details
          machine measurements 12.200x1.800x800 mm︱machine weight 1.040 kg︱power capacity 27 kW︱
            machine measurements 12.200x1.800x800 mm
            machine weight 1.040 kg
            power capacity 27 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete NELA ROVI Kontrollautomat fuer O-Ringe


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220102 · Plants, complete

          NELA ROVI - Kontrollautomat fuer O-Ringe - - 2011 -

          Technical details
          machine measurements 2.200 x 1.200 x 2.260 mm︱machine weight 1.000 kg︱power capacity -- kW︱
          Condition: used Specification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations - year of construction approx.: 2011 - pick-up stations: 16 - measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm) - Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day - Technical application: surface defect and crack detection on O-rings - Sorting function: Good, Bad, Undefined - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm - Weight approx.: 1,000 kg Camera defective!
            machine measurements 2.200 x 1.200 x 2.260 mm
            machine weight 1.000 kg
            power capacity -- kW
            Description :
            Condition: used

            Specification: automatic control machine for O-rings - second-hand
            rotary transfer machine with 16 pick-up stations

            - year of construction approx.: 2011
            - pick-up stations: 16
            - measuring range: ID from 55 - 90 mm
            cord from 2,5 - 3,5 mm (ID 55 - 70 mm)
            cord from 2.5 - 4.5 mm (ID 70 - 90 mm)
            - Part throughput: approx. 3 - 4 seconds per part
            approx. 900 - 1,200 parts per hour
            approx. 21,600 - 28,800 parts per day
            - Technical application: surface defect and crack detection
            on O-rings
            - Sorting function: Good, Bad, Undefined
            - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm
            - Weight approx.: 1,000 kg

            Camera defective!



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete GERLACH SHF-Kanal, Schockmodul + UHF


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220401 · Plants, complete

          GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 182 kW︱
          Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 182 kW
            Description :
            Condition: used,

            Specification: heating channel + shock module incl. UHF and PCT
            Typ: SHF 150-120-1-147-12

            - length approx.: 12.000 mm
            - Consisting of: 9.000 mm hot air channel, incl. UHF
            3.000 mm shock module
            with folding infeed conveyor and PCT
            - UHF power: 4x 3 kW
            - Temperature range UHF part: 240°C - 340°C
            - Temperature range shock module: 240°C - 500°C
            - Shock module with non-driven metal rollers
            - Extrusion height: 1,100 mm
            - Extrusion direction: from right to left
            - At the infeed and outfeed one 50 kW burner each
            - PCT burner capacity: 70 kW
            - Heating: gas heated
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete GERLACH Heizkanal HLK 150-1-110-12m


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220402 · Plants, complete

          GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 170 kW︱
          Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 170 kW
            Description :
            Condition: used,

            Specification: 12m heating duct incl. PCT

            - length approx.: 12.000 mm
            - extrusion height: 1.100 mm
            - extrusion direction: from right to left
            - belt width: 150 mm
            - Channel width: 190 mm
            - At the inlet and outlet there is a 50 kW burner each
            - In the PCT there is a 70 kW burner
            - Temperature range: 240°C to 340°C
            - Heating: gas heated
            - Belt speed: 2-40 m/min
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete GERLACH Nachheizkanal


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220403 · Plants, complete

          GERLACH - Nachheizkanal - - 1989/2015 -

          Technical details
          machine measurements Länge ca. 21.000 mm︱machine weight -- kg︱power capacity 200 kW︱
          Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015
            machine measurements Länge ca. 21.000 mm
            machine weight -- kg
            power capacity 200 kW
            Description :
            Condition: used,

            Specification: 21m post-heating duct with heat exchanger

            - length approx.: 21.000 mm
            - consisting of: 21.000 mm heating channel, incl. heat exchanger
            - extrusion height: 1.100 mm
            - Extrusion direction: from right to left
            - 4x burners with 50kW burner each
            - Tempering range: 240°C - 340°C
            - Heating: gas heated
            - Control system: Siemens

            Heating duct extension by 2x 3m, 2015
            - The duct was extended by 2x 3m segments in 2016
            - The burners of the 21,000 mm system were renewed in 2015



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Plants, complete MEB Batch-Off 700


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G181201 · Plants, complete

          MEB - Batch-Off 700 - - -

          Technical details
          machine measurements ca. 12.000 mm︱machine weight -- kg︱power capacity -- kW︱ 550 mm︱
          Condition: new Specification: Batch-Off-plant for rubber stripes - new - width stripes inlet up to 700 mm - maximum width value of rubber strip: 550 mm - input moving belt - rubber band stapler - stainless steel tank to contain release agent - stainless steel mesh band to extract the material - dry tunnel with 6 cooling fans 800 x 800 mm - length cooling section: about 8000 mm - output: fixed belt - storage: Wig-wag palletization system - total length of plant: about 12.000 mm - painting acc. to your specifications - safety guards: acc. to current standard - N.6 AC main motors on the line, driven by inverter systems - new electric cabinet and panels - on-board machine system new new construction with guarantee with CE mark and CE user and maintenance manual in English
            machine measurements ca. 12.000 mm
            machine weight -- kg
            power capacity -- kW
            550 mm
            Description :
            Condition: new

            Specification: Batch-Off-plant for rubber stripes - new

            - width stripes inlet up to 700 mm
            - maximum width value of rubber strip: 550 mm
            - input moving belt
            - rubber band stapler
            - stainless steel tank to contain release agent
            - stainless steel mesh band to extract the material
            - dry tunnel with 6 cooling fans 800 x 800 mm
            - length cooling section: about 8000 mm
            - output: fixed belt
            - storage: Wig-wag palletization system
            - total length of plant: about 12.000 mm
            - painting acc. to your specifications
            - safety guards: acc. to current standard
            - N.6 AC main motors on the line, driven by inverter systems
            - new electric cabinet and panels
            - on-board machine system new

            new construction with guarantee
            with CE mark and CE user and maintenance manual in English


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact

          Lab Mixer

          used Rubber processing Lab Mixer BEBA BEBA B3 No. 1002


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00428 · Lab Mixer

          BEBA - BEBA B3 No. 1002 - - 1999 - konventionell

          Technical details
          year of construction 1999 -︱weight 83 kg︱dimensions 51x40x99 mm︱
          BEBA height-adjustable laboratory mixer type BEBA B3 No. 1002 with height adjustment pillar LINAK type LP2-2.2B-300-24 adjustable stroke 300mm fully functional stainless steel version with potentiometer for slewing gear and mixer dimensions 51x40x99mm used year of construction 1999 very good condition weight 83kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            year of construction 1999 -
            weight 83 kg
            dimensions 51x40x99 mm
            Description :
            BEBA
            height-adjustable laboratory mixer
            type BEBA B3
            No. 1002
            with height adjustment pillar
            LINAK
            type LP2-2.2B-300-24
            adjustable stroke 300mm
            fully functional
            stainless steel version
            with potentiometer for
            slewing gear and mixer
            dimensions 51x40x99mm
            used
            year of construction 1999
            very good condition
            weight 83kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 1.600 €
          Datasheet
          Request / Contact

          Mixer

          used Rubber processing Mixer Meccaniche Moderne BETA 26


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-D171102 · Mixer

          Meccaniche Moderne - BETA 26 - - n.b. -

          Technical details
          chamber volume 38 liter︱useable volume -- liter︱friction ca. 1:1,17 ︱motor drive power 110 KW︱
          SSpecification: internal mixer - used usable volume: approx. 38 litres (depending on the filling factor) - closing system: trap door - pneumatic ram: for material loading - gearbox: semi-unidrive system - Rotor geometry: tangential - Friction approx.: 1:1.17 (to be checked) - Slewing rings for water cooling new - AC motor: 110 KW - 400 V - 50 Hz - Safety device: according to applicable standards - paint: according to customer's request - electr. system: new - with frequency converter for adjustable speed - electr. control panel: new - machine wiring: new - general overhauled machine with 1 year warranty, with CE operating and maintenance instructions in English, with CE mark
            chamber volume 38 liter
            useable volume -- liter
            friction ca. 1:1,17
            motor drive power 110 KW
            Description :
            SSpecification: internal mixer - used

            usable volume: approx. 38 litres
            (depending on the filling factor)
            - closing system: trap door
            - pneumatic ram: for material loading
            - gearbox: semi-unidrive system
            - Rotor geometry: tangential
            - Friction approx.: 1:1.17 (to be checked)
            - Slewing rings for water cooling new
            - AC motor: 110 KW - 400 V - 50 Hz
            - Safety device: according to applicable standards
            - paint: according to customer's request
            - electr. system: new - with frequency converter for
            adjustable speed
            - electr. control panel: new
            - machine wiring: new
            - general overhauled machine

            with 1 year warranty, with CE operating and maintenance
            instructions in English, with CE mark




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Mixer Well Sayang Machinery SKI-170L


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-D230202 · Mixer

          Well Sayang Machinery - SKI-170L - - 2015 -

          Technical details
          chamber volume 170 liter︱useable volume -- liter︱friction -- ︱motor drive power 800 kW︱
          Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm
            chamber volume 170 liter
            useable volume -- liter
            friction --
            motor drive power 800 kW
            Description :
            Condition: used -

            Specification: internal mixer used
            as additional option:
            Rubicon batch-off plant

            - capacity approx.: 170 litres
            - rotor model: tangential design
            - drive controller: Allen Breadley
            - Control: Mitsubishi
            - Motor speed: 1,000 rpm
            - Gearbox: Panamax 9000 make Sumitomo
            - Rotor speed: 5.6 - 55.6 rpm
            - Chamber hardness: 45 -50 HRC
            - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz
            - Moror make: Teco
            - Output: 27 tons/day
            - Cycle time approx.: 4 - 8 min
            - Height approx.: 7,500 mm
            - Weight approx.: 35,000 kg, incl. gearbox and motor

            Available as an option:
            - Batch-off system Make: Rubikon / Mattech
            - Cooling bars max.: 300 mm / 2x 80 mm



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Mixer POMINI-FARREL PX 80


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-D190402 · Mixer

          POMINI-FARREL - PX 80 - - 2001 -

          Technical details
          chamber volume 80 liter︱useable volume -- liter︱friction -- ︱motor drive power 390 kW︱
          Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year
            chamber volume 80 liter
            useable volume -- liter
            friction --
            motor drive power 390 kW
            Description :
            Condition: used - overhauled - with warranty

            Specification: Internal mixer used

            - Capacity: about 80 lts
            - Rotors model: tangential type with 3 wings
            - Command gearbox: semi-unidrive type
            - Max speed rotors: about 60 rpm
            - Closing system: drop-door type
            - Hydraulic unit for drop-door system
            - Pneumatic hopper for loading material
            - DC engine: 390 kW - 1500 rpm - 440 V
            - New electric cabinet with driving system for variable speed of rotors
            - N.1 new electric panel
            - New on board electric system on the machine
            - Safety devices in according to standard rules
            - Manual of use and maintenance in English language and CE marking
            - Reconditioned and guaranteed machine in according to standard rules
            - Warranty: 1 year



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Mixer POMINI-FARREL PL Laboratory 1,6 lts


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-D230301 · Mixer

          POMINI-FARREL - PL Laboratory 1,6 lts - - 1986 -

          Technical details
          chamber volume - liter︱useable volume 1,6 liter︱friction - ︱motor drive power 22 kW︱
          Condition: used - overhauled Specification: Laboratory internal mixer - second-hand - chamber volume: approx. 1.6 l - closing system: front door with pneumatic piston - plunger: pneumatic - rotor geometry: tangential type - Oil-free self-lubricating sealing rings - New rotary union for water cooling - New main gearbox - New AC motor: 22 kW - Control cabinet: NEW - Control panel with OP 7": NEW - Wiring: NEW - New frequency converter for variable speed - Paintwork: according to customer specifications - With safety devices according to current standard - overhauled, with warranty 12 months, with CE-marking, Operating and maintenance instructions in English
            chamber volume - liter
            useable volume 1,6 liter
            friction -
            motor drive power 22 kW
            Description :
            Condition: used - overhauled

            Specification: Laboratory internal mixer - second-hand

            - chamber volume: approx. 1.6 l
            - closing system: front door with pneumatic piston
            - plunger: pneumatic
            - rotor geometry: tangential type
            - Oil-free self-lubricating sealing rings
            - New rotary union for water cooling
            - New main gearbox
            - New AC motor: 22 kW
            - Control cabinet: NEW
            - Control panel with OP 7": NEW
            - Wiring: NEW
            - New frequency converter for variable speed
            - Paintwork: according to customer specifications
            - With safety devices according to current standard
            - overhauled, with warranty 12 months, with CE-marking,
            Operating and maintenance instructions in English



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact

          Preformers

          used Rubber processing Preformers BARWELL Preformer C3


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-I210301 · Preformers

          BARWELL - Preformer C3 - - 1982 -

          Technical details
          barrel diameter 254 mm︱max. barrel capacity 60 liter︱ram stroke -- mm︱
          Condition: used, Specification: blank vending machine - second-hand incl. tilting cooling unit Collectacool drive: - Hydraulic pump motor: 11 kW - Cutting motor: 1.1 kW - Vacuum pump motor: 2.2 kW - Heating power: 9 kW - Chamber volume: 60 kg - Cylinder diameter: 254 mm - Largest nozzle diameter: 190 mm - Operating voltage: 3x380 V / 50 Hz (Europe) - Total weight: 3,080 kg - incl. tilting cooling unit: Collectacool
            barrel diameter 254 mm
            max. barrel capacity 60 liter
            ram stroke -- mm
            Description :
            Condition: used,

            Specification: blank vending machine - second-hand
            incl. tilting cooling unit Collectacool

            drive:
            - Hydraulic pump motor: 11 kW
            - Cutting motor: 1.1 kW
            - Vacuum pump motor: 2.2 kW
            - Heating power: 9 kW
            - Chamber volume: 60 kg
            - Cylinder diameter: 254 mm
            - Largest nozzle diameter: 190 mm
            - Operating voltage: 3x380 V / 50 Hz (Europe)
            - Total weight: 3,080 kg
            - incl. tilting cooling unit: Collectacool



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact

          Roll calenders

          used Rubber processing Roll calenders BERSTORFF 3-Walzen, I-Kalander


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-E170401 · Roll calenders

          BERSTORFF - 3-Walzen, I-Kalander - - n.b. -

          Technical details
          roll diameter 250 mm︱roll length 500 mm︱rolls drilled Kernbohrung ︱nip adjustment mechanisch ︱drive power: kW︱
            roll diameter 250 mm
            roll length 500 mm
            rolls drilled Kernbohrung
            nip adjustment mechanisch
            Description :



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Roll calenders Troester KA 5183


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03542 · Roll calenders

          Troester - KA 5183 - - 1963 -

          Technical details
          roll surface width 450 mm︱roll diam. toproll 203 mm︱roll diam. bottom roll 203 mm︱output 8,8 kw︱
            roll surface width 450 mm
            roll diam. toproll 203 mm
            roll diam. bottom roll 203 mm
            output 8,8 kw


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          Extruders (plastic)

          used Rubber processing Extruders (plastic) Sikoplast HKS 180-120, Granulieranlage


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-M210902 · Extruders (plastic)

          Sikoplast - HKS 180-120, Granulieranlage - - n.b. -

          Technical details
          screw ø: 180 mm︱screw length: 30D ︱screw speedl: -- U/min︱drive power: 90 kW︱
          Condition: used - Specification: plastic granulating line extruder HKS 180-120 with side dosing make Sikoplast Overhauled 2015 - Usage: wetting of carbon fibre - Drive power: 90 kW - L/D ratio: 30 - Screw type: 3-zone screw - Throughput capacity: 80 - 250 kg - Atmospheric degassing: Yes - Vacuum degassing: No - with side dosing: make Sikoplast - Application: Dosing of raw materials into the extruder - Drive power: 11 kW - Speed: 1 - 36 rpm
            screw ø: 180 mm
            screw length: 30D
            screw speedl: -- U/min
            drive power: 90 kW
            Description :
            Condition: used -

            Specification: plastic granulating line extruder HKS 180-120
            with side dosing make Sikoplast
            Overhauled 2015

            - Usage: wetting of carbon fibre
            - Drive power: 90 kW
            - L/D ratio: 30
            - Screw type: 3-zone screw
            - Throughput capacity: 80 - 250 kg
            - Atmospheric degassing: Yes
            - Vacuum degassing: No

            - with side dosing: make Sikoplast
            - Application: Dosing of raw materials into the extruder
            - Drive power: 11 kW
            - Speed: 1 - 36 rpm



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Extruders (plastic) BANDERA Einschnecken 75-33D


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-M221101 · Extruders (plastic)

          BANDERA - Einschnecken 75-33D - - 1997 -

          Technical details
          screw ø: 75 mm︱screw length: 33D ︱screw speedl: -- U/min︱drive power: 191 kW︱
          Condition: used - Specification: single screw plastic extruder type 75-33D completely overhauled, in very good condition - screw diameter: 75 mm - screw length: 33D - output approx.: 350 kg/h - DC motor power: 191 kW - Screw: overhauled, cylinder polished, - electrics: new - Extruder completely overhauled In case of order, the extruder would still be subjected to a test run.
            screw ø: 75 mm
            screw length: 33D
            screw speedl: -- U/min
            drive power: 191 kW
            Description :
            Condition: used -

            Specification: single screw plastic extruder type 75-33D
            completely overhauled, in very good condition

            - screw diameter: 75 mm
            - screw length: 33D
            - output approx.: 350 kg/h
            - DC motor power: 191 kW
            - Screw: overhauled, cylinder polished,
            - electrics: new
            - Extruder completely overhauled

            In case of order, the extruder would still be subjected to a test run.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Extruders (plastic) IND. GENERALI Einschnecken 80-30D


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-M221102 · Extruders (plastic)

          IND. GENERALI - Einschnecken 80-30D - - 1995 -

          Technical details
          screw ø: 80 mm︱screw length: 30D ︱screw speedl: -- U/min︱drive power: 116 kW︱
          Condition: used - Specification: single screw plastic extruder type 80-30D completely overhauled, - screw diameter: 80 mm - screw length: 30D - output approx.: 350 kg/h - DC motor power: 116 kW - Electrics: New - Extruder completely overhauled - incl. attached co-extruder In case of order, the extruder would still be subjected to a test run.
            screw ø: 80 mm
            screw length: 30D
            screw speedl: -- U/min
            drive power: 116 kW
            Description :
            Condition: used -

            Specification: single screw plastic extruder type 80-30D
            completely overhauled,

            - screw diameter: 80 mm
            - screw length: 30D
            - output approx.: 350 kg/h
            - DC motor power: 116 kW
            - Electrics: New
            - Extruder completely overhauled
            - incl. attached co-extruder

            In case of order, the extruder would still be subjected to a test run.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact

          Rubber Extruder

          used Rubber processing Rubber Extruder BANDERA 60er x 11D


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-F210101 · Rubber Extruder

          BANDERA - 60er x 11D - - n.b. -

          Technical details
          screw ø: 60 mm︱screw length: 11D ︱screw speedl: -- U/min︱drive power: 18,5 kW︱
          Condition: used, overhauled Specification: rubber extruder - used - screw diameter: 60 mm - screw length: 11D - screw length: approx. 660 mm - overhaul of screw and barrel - Overhaul of feed roller and safety cage - New rotary union for water - AC motor: 18.5 kW - New control cabinet with frequency converter for variable speed - New cabling - Pressure and temperature sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Overhauled according to CE-Standard safety regulations Warranty: 1 year Option: 3x temperature control units up to 95°C water temperature Power: 6 kW
            screw ø: 60 mm
            screw length: 11D
            screw speedl: -- U/min
            drive power: 18,5 kW
            Description :
            Condition: used, overhauled

            Specification: rubber extruder - used

            - screw diameter: 60 mm
            - screw length: 11D
            - screw length: approx. 660 mm
            - overhaul of screw and barrel
            - Overhaul of feed roller and safety cage
            - New rotary union for water
            - AC motor: 18.5 kW
            - New control cabinet with frequency converter
            for variable speed
            - New cabling
            - Pressure and temperature sensors on the extruder head
            - Safety device
            - CE marking and an operating and
            maintenance manual in English

            Overhauled according to CE-Standard safety regulations
            Warranty: 1 year

            Option:
            3x temperature control units
            up to 95°C water temperature
            Power: 6 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Rubber Extruder TROESTER Zahnradpumpe ZP 90/63


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-F190101 · Rubber Extruder

          TROESTER - Zahnradpumpe ZP 90/63 - - n.b. -

          Technical details
          screw ø: für Extruder 120 mm︱screw length: -- ︱screw speedl: -- U/min︱drive power: 19,8 kW︱
            screw ø: für Extruder 120 mm
            screw length: --
            screw speedl: -- U/min
            drive power: 19,8 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Rubber processing Rubber Extruder Yato 120er x 17D


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-F200701 · Rubber Extruder

          Yato - 120er x 17D - - n.b. -

          Technical details
          screw ø: 120 mm︱screw length: 17D ︱screw speedl: 42 U/min︱drive power: 138 kW︱
            screw ø: 120 mm
            screw length: 17D
            screw speedl: 42 U/min
            drive power: 138 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •