.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Facing Lathe

          Machinelist: Facing Lathe


          Facing Lathe

          used Lathes Facing Lathe TADU FS 1250 CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1010063 · Facing Lathe

          TADU - FS 1250 CNC - - NB - FAGOR 8050 T

          Technical details
          faceplate diameter 1800 mm︱turning diameter over slide rest 2500 mm︱turning length mm︱Control FAGOR 8050 T ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm
            faceplate diameter 1800 mm
            turning diameter over slide rest 2500 mm
            Control FAGOR 8050 T
            Description :
            Stocknumber 1010063
            Type of machine CNC Facelathe
            Make TADU
            Type FS 1250
            Build in nb
            Type of control FAGOR, 8050T
            Turnung diameter over bed 2500 mm


            Additional information
            4-jaws chuck 1800 mm



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe SEIGER SPL-CG1400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17807 · Facing Lathe

          SEIGER - SPL-CG1400 - - 2018 - ManualPlus 620

          Technical details
          turning diameter over slide rest 1.400 mm︱faceplate diameter 1.000 mm︱x-travel 740 mm︱z-travel 402 mm︱Control ManualPlus 620 ︱Turning Speed - Range 1 1 - 250 U/min.︱Turning Speed - Range 2 1 - 710 U/min.︱power capacity at 60% / 100 % load 46 / 38 KW︱torque max. 6.000 Nm︱feed capacity X/Z 14 / 18 kN︱feed x/z-axis 1 - 8.000 mm/min︱max. workpiece weight -without tailstock 19.000 kg︱spindle taper DIN55027 Gr. 15 ︱spindle bore 130 mm︱spindle diameter in front bearing 220 mm︱total power requirement 60,00 kW︱weight of the machine ca. 7,50 t︱dimensions of the machine ca. 4,00 x 2,50 x H2,50 m︱
          HEIDENHAIN ManualPlus 620 Hydraulic power clamping device 3-jaw chuck SMW Autobloc Ø 1000 mm 4-fold steel holder PARAT "manual"
            turning diameter over slide rest 1.400 mm
            faceplate diameter 1.000 mm
            x-travel 740 mm
            z-travel 402 mm
            Control ManualPlus 620
            Turning Speed - Range 1 1 - 250 U/min.
            Turning Speed - Range 2 1 - 710 U/min.
            power capacity at 60% / 100 % lo. 46 / 38 KW
            torque max. 6.000 Nm
            feed capacity X/Z 14 / 18 kN
            feed x/z-axis 1 - 8.000 mm/min
            max. workpiece weight -without t. 19.000 kg
            spindle taper DIN55027 Gr. 15
            spindle bore 130 mm
            spindle diameter in front bearin. 220 mm
            total power requirement 60,00 kW
            weight of the machine ca. 7,50 t
            dimensions of the machine ca. 4,00 x 2,50 x H2,50 m
            Description :
            HEIDENHAIN ManualPlus 620
            Hydraulic power clamping device
            3-jaw chuck SMW Autobloc Ø 1000 mm
            4-fold steel holder PARAT "manual"


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe SEIGER REKORD CG1400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17806 · Facing Lathe

          SEIGER - REKORD CG1400 - - 2009 - ManualPlus 620

          Technical details
          turning diameter over slide rest 1400 mm︱faceplate diameter 1.000 mm︱x-travel 725 mm︱z-travel 400 mm︱Control ManualPlus 620 ︱Turning Speed - Range 1 5 - 250 U/min.︱Turning Speed - Range 2 5 - 710 U/min.︱total power requirement 55 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 4,8 x 2,5 x 2,1 m︱
          4-fold steel holder PARAT "manual" Manually operated faceplate ROEHM 4 jaws Ø 1000 mm
            turning diameter over slide rest 1400 mm
            faceplate diameter 1.000 mm
            x-travel 725 mm
            z-travel 400 mm
            Control ManualPlus 620
            Turning Speed - Range 1 5 - 250 U/min.
            Turning Speed - Range 2 5 - 710 U/min.
            total power requirement 55 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 4,8 x 2,5 x 2,1 m
            Description :
            4-fold steel holder PARAT "manual"
            Manually operated faceplate ROEHM 4 jaws Ø 1000 mm


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe POREBA TZG 250 A


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19718 · Facing Lathe

          POREBA - TZG 250 A - - 1992 -

          Technical details
          faceplate diameter 2000 mm︱turning diameter over plate 2500 mm︱workpiece width - max. 300 mm︱turning diameter in the pit 3200 mm︱turning speed range - faceplate 0,5 - 100 U/min︱feed range 800 mm/min︱steel cross cut max. 70 x 70 mm²︱spindle bore 105 mm︱spindle diameter in front bearing 320 mm︱headstock travel cross 1000 mm︱max. workpiece weight between centers 25000 kg︱max. workpiece weight -without tailstock 6000 kg︱cross slide - travel 450 mm︱upper slide-adjustment 700 mm︱total power requirement 35 kW︱weight of the machine ca. 20 t︱
          - Digital Read Out - Chip Conveyor - Hydr. Copy Attachment
            faceplate diameter 2000 mm
            turning diameter over plate 2500 mm
            workpiece width - max. 300 mm
            turning diameter in the pit 3200 mm
            turning speed range - faceplate 0,5 - 100 U/min
            feed range 800 mm/min
            steel cross cut max. 70 x 70 mm²
            spindle bore 105 mm
            spindle diameter in front bearin. 320 mm
            headstock travel cross 1000 mm
            max. workpiece weight between ce. 25000 kg
            max. workpiece weight -without t. 6000 kg
            cross slide - travel 450 mm
            upper slide-adjustment 700 mm
            total power requirement 35 kW
            weight of the machine ca. 20 t
            Description :

            - Digital Read Out
            - Chip Conveyor
            - Hydr. Copy Attachment


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe WMW-NILES DP1


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-011 · Facing Lathe

          WMW-NILES - DP1 - - 1986 -

          Technical details
          faceplate diameter 1250 mm︱turning diameter over slide rest 2500 mm︱turning length 4000 mm︱total power requirement 45 kW︱weight of the machine ca. 18 t︱required space 8 x 4 x 2,1 m︱
          Facing lathe WMW Niles with tailstock Centre height 1.250 mm Swing 2.500 mm over bed Centre distance 4.000 mm Travel of carriage 750 mm Longitudinal 630 mm crosslide 4-Jaw Chuck ø 1.250 mm Spindle speed 5,6 - 280 Rpm Spindle bore 100 mm Weight of workpiece 10.000 kg Featured with - Floorplates 4.500 x 2.200 mm - Powered tailstock - Documentation Country of origin Germany Motor power 45 kW Machine weight 18.000 kg Machine LxWxH 8.000 x 4.000 x 2.100 mm
            faceplate diameter 1250 mm
            turning diameter over slide rest 2500 mm
            turning length 4000 mm
            total power requirement 45 kW
            weight of the machine ca. 18 t
            required space 8 x 4 x 2,1 m
            Description :
            Facing lathe WMW Niles with tailstock
            Centre height 1.250 mm
            Swing 2.500 mm over bed
            Centre distance 4.000 mm
            Travel of carriage 750 mm
            Longitudinal 630 mm crosslide
            4-Jaw Chuck ø 1.250 mm
            Spindle speed 5,6 - 280 Rpm
            Spindle bore 100 mm
            Weight of workpiece 10.000 kg
            Featured with
            - Floorplates 4.500 x 2.200 mm
            - Powered tailstock
            - Documentation
            Country of origin Germany
            Motor power 45 kW
            Machine weight 18.000 kg
            Machine LxWxH 8.000 x 4.000 x 2.100 mm


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D-sl

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D-sl ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D-sl
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Facing Lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe RAVENSBURG K 900 KH


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-18011 · Facing Lathe

          RAVENSBURG - K 900 KH - - 1966 -

          Technical details
          faceplate diameter 0 mm︱turning diameter over slide rest 900 mm︱turning length 1.000 mm︱total power requirement 25 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
          Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine is suitable for complicated, high precision copying of heavy workpieces.
            turning diameter over slide rest 900 mm
            turning length 1.000 mm
            total power requirement 25 kW
            weight of the machine ca. 8 t
            Description :
            Height of centres 550 mm
            Max. turning Æ 1200 mm
            Max. turning Æ over slides, approx. 900 mm
            Max. turning length, approx. 1000 mm
            Spindle bore, approx. 90 mm
            24 spindle speeds 4.3 - 587 rpm
            Feeds, infinitely variable 1 - 170 mm/min
            Total load, approx. 25 kW - 380 V - 50 Hz
            Weight, approx. 8000 kg

            Accessories/specialities
            Two separate slides, each equipped with 2-coordinate copying
            equipment, program controlled by plugboard, strengthened bearings
            and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/
            face plate, separate switch cabinet and cooling equipment.
            This machine is suitable for complicated, high precision copying
            of heavy workpieces.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe WMW  ZERBST DP 4000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03798 · Facing Lathe

          WMW ZERBST - DP 4000 - - 1961 -

          Technical details
          faceplate diameter 3500 mm︱turning diameter 4000 mm︱centre distance 16000 mm︱turning speeds 0,71-33,5 U/min︱Rest 2 ︱tailstock quill taper MT ︱max. workpiece weight -without tailstock 6300 kg︱max. workpiece weight between centres 18000 kg︱Plate area mm︱total power requirement 31 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. m︱
            faceplate diameter 3500 mm
            turning diameter 4000 mm
            centre distance 16000 mm
            turning speeds 0,71-33,5 U/min
            Rest 2
            max. workpiece weight -without t. 6300 kg
            max. workpiece weight between ce. 18000 kg
            total power requirement 31 kW
            weight of the machine ca. 50 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe HEYLIGENSTAEDT 6P


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1897 · Facing Lathe

          HEYLIGENSTAEDT - 6P - - 1953 -

          Technical details
          turning length / mm︱turning diameter over plate // mm︱faceplate diameter / mm︱
          Faceplate diameter: 3500mm Center height over plate: 1320mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: about 2400mm Max. workpiece weight: 22000kg Max. torque on the faceplate: 5000 mkg Faceplate ring gear pitch circle diameter: 1900mm Main spindle bore: 120mm range of speeds normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Drive power: 38kW
            turning length / mm
            turning diameter over plate // mm
            faceplate diameter / mm
            Description :
            Faceplate diameter: 3500mm
            Center height over plate: 1320mm
            Turning diameter over plate: 2600mm
            Turning diameter in the pit: 3600mm
            Turning diameter over bed: 1300mm
            Turning length: about 2400mm
            Max. workpiece weight: 22000kg
            Max. torque on the faceplate: 5000 mkg
            Faceplate ring gear pitch circle diameter: 1900mm
            Main spindle bore: 120mm
            range of speeds
            normal: 0.71-35.5 rpm
            increased: 1-50 rpm
            increased: 1.4-71 rpm
            Drive power: 38kW


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe LIEBER 823681


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03153 · Facing Lathe

          LIEBER - 823681 - - -

          Technical details
          faceplate diameter 3200 mm︱slide adjustment 800 mm︱turning speeds 1,5-78 U/min︱stepless reg. with elect. turning speeds ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 3200 mm
            slide adjustment 800 mm
            turning speeds 1,5-78 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe NILES DP630/3at


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02845 · Facing Lathe

          NILES - DP630/3at - - -

          Technical details
          3-jaw-chuck diameter 630 mm︱turning diameter over slide rest 650 mm︱turning length 500 mm︱turning dia. in gap 1420 mm︱digital readout Mitutoyo ︱turning speeds 3,55-710 U/min︱total power requirement 24 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. m︱
            3-jaw-chuck diameter 630 mm
            turning diameter over slide rest 650 mm
            turning length 500 mm
            turning dia. in gap 1420 mm
            digital readout Mitutoyo
            turning speeds 3,55-710 U/min
            total power requirement 24 kW
            weight of the machine ca. 9 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe RAVENSBURG


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03540 · Facing Lathe

          RAVENSBURG - - - -

          Technical details
          faceplate diameter 1300 mm︱turning diameter over slide rest 850 mm︱centre distance 1800 mm︱turning diameter 2150 mm︱turning speeds 3,15-160 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 1300 mm
            turning diameter over slide rest 850 mm
            centre distance 1800 mm
            turning diameter 2150 mm
            turning speeds 3,15-160 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe MEUSER 1500/1400


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100111 · Facing Lathe

          MEUSER - 1500/1400 - - -

          Technical details
          faceplate diameter 1400 mm︱turning diameter over slide rest 1400 mm︱centre distance 1500 mm︱turning length mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 1400 mm
            turning diameter over slide rest 1400 mm
            centre distance 1500 mm


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact

          Heavy Duty Lathe

          used Lathes Heavy Duty Lathe FRORIEP SS 60 x 13000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-15807 · Heavy Duty Lathe

          FRORIEP - SS 60 x 13000 - - ca. 1975 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 2200 mm︱turning length 13000 / 6500 mm︱centre distance 13000 mm︱faceplate yes mm︱workpiece weight 100 t︱steady 8 ︱Rest 2 ︱spindle bore 95 mm︱internal taper diameter 120 mm︱tailstock quill taper metric 120mm 60° ︱tailstock quill diameter 280 mm︱quill travel 450 mm︱total power requirement - kW︱
          Heavy Duty Lathe with 4-guides bed and is equipped with 2 cross-slides: - one is mounted on a chassis bed installed next to the main chassis of the lathe - one is mounted on an upper chassis bed on top of the main chassis of the lathe - the upper chassis bed is also movable on top of the main chassis of the lathe Max length of workpiece on main chassis: 13 meter Max length of workpiece on top of upper chassis bed: 6,5 meter Max swing in gap using main cross-slide: 4000 mm Max swing over bed using using secondary cross-slide: 2700 mm Max swing over cross-slide: 2220 mm - 8 Steadies
            turning diameter over bed 4000 mm
            turning diameter over slide rest 2200 mm
            turning length 13000 / 6500 mm
            centre distance 13000 mm
            faceplate yes mm
            workpiece weight 100 t
            steady 8
            Rest 2
            spindle bore 95 mm
            internal taper diameter 120 mm
            tailstock quill taper metric 120mm 60°
            tailstock quill diameter 280 mm
            quill travel 450 mm
            total power requirement - kW
            Description :
            Heavy Duty Lathe with 4-guides bed and is equipped with 2 cross-slides:
            - one is mounted on a chassis bed installed next to the main chassis of the
            lathe
            - one is mounted on an upper chassis bed on top of the main chassis of the lathe
            - the upper chassis bed is also movable on top of the main chassis of the lathe

            Max length of workpiece on main chassis: 13 meter
            Max length of workpiece on top of upper chassis bed: 6,5 meter
            Max swing in gap using main cross-slide: 4000 mm
            Max swing over bed using using secondary cross-slide: 2700 mm
            Max swing over cross-slide: 2220 mm
            - 8 Steadies


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe QIQIHAR HT125x110/12


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08290 · Heavy Duty Lathe

          QIQIHAR - HT125x110/12 - - 2009 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 1000 mm︱turning length 11000 mm︱total power requirement kW︱weight of the machine ca. 49 t︱dimensions of the machine ca. m︱
          Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual
            turning diameter over bed 1250 mm
            turning diameter over slide rest 1000 mm
            turning length 11000 mm
            weight of the machine ca. 49 t
            Description :
            Center height 720 mm
            Center distance 11000 mm
            Turning diameter over bed 1250 mm
            Turning diameter over slide 1000 mm
            Workpiece weight max 12 to
            Speed 3-315 rpm - stepless
            Motor power 55 kW (DC)

            Equipment
            1 position indicator HEIDENHAIN | Type ND 780 for 1 axis
            1 four-jaw faceplate Ø 1000 mm
            1 fixed steady rest
            1 ring steady rest with four-jaw faceplate Ø 920 mm
            1 Autom. 4-pos. tool holder
            1 Chip conveyor
            1 Machine lamp
            1 Coolant device
            Operating key | operating manual


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe GIANA GFSC 12 CNC


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0294 · Heavy Duty Lathe

          GIANA - GFSC 12 CNC - - 2007 - Sinumerik 840D

          Technical details
          turning diameter over bed 1.200 mm︱turning diameter over slide rest 710 mm︱turning length 7.000 mm︱Control Sinumerik 840D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heavy duty lathe with milling and grinding function / Brand: GIANA / Type: GFSC 12 CNC / Year of construction: 2007 The machine can be inspected by appointment under working condition. TECHNICAL SPECIFICATIONS: - Turning diameter over bed: 1.200 mm - Turning diameter over slide rest: 710 mm - Turning length: 7.000 mm - CNC Control: SIEMENS SINUMERIK 840D EQUIPMENT/ACCESSORIES: - Cooling lubricant system - Chip conveyor - Various accessories: Steady rests .... There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            turning diameter over bed 1.200 mm
            turning diameter over slide rest 710 mm
            turning length 7.000 mm
            Control Sinumerik 840D
            Description :
            Heavy duty lathe with milling and grinding function / Brand: GIANA /
            Type: GFSC 12 CNC / Year of construction: 2007

            The machine can be inspected by appointment under working condition.

            TECHNICAL SPECIFICATIONS:
            - Turning diameter over bed: 1.200 mm
            - Turning diameter over slide rest: 710 mm
            - Turning length: 7.000 mm

            - CNC Control: SIEMENS SINUMERIK 840D

            EQUIPMENT/ACCESSORIES:
            - Cooling lubricant system
            - Chip conveyor
            - Various accessories: Steady rests ....


            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available on request.


        • Isabelle Knops
        • Opladener Str. 126
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe WOHLENBERG PT1-1070II


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03186 · Heavy Duty Lathe

          WOHLENBERG - PT1-1070II - - 1989 - Siemens

          Technical details
          turning diameter over bed 1070 mm︱turning diameter over slide rest 710 mm︱turning length 11000 mm︱Control Siemens ︱type 840 D ︱bed width 710 mm︱transmission ratio 2 ︱turning speeds 3,55-710 U/min︱diameter of quill 200 mm︱quill stroke 350 mm︱spindle passage 128 mm︱chip conveyor ︱faceplate 1000 mm︱steady 500 mm︱steady 500 mm︱steady 500 mm offen︱steady 500 mm offen︱steady 800 mm offen︱steady 800 mm offen︱roll stand 2 St︱
            turning diameter over bed 1070 mm
            turning diameter over slide rest 710 mm
            turning length 11000 mm
            Control Siemens
            type 840 D
            bed width 710 mm
            transmission ratio 2
            turning speeds 3,55-710 U/min
            diameter of quill 200 mm
            quill stroke 350 mm
            spindle passage 128 mm
            faceplate 1000 mm
            steady 500 mm
            steady 500 mm
            steady 500 mm offen
            steady 500 mm offen
            steady 800 mm offen
            steady 800 mm offen
            roll stand 2 St


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe KRAMATORSK K3


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01617 · Heavy Duty Lathe

          KRAMATORSK - K3 - - 1987 - Sinumerik 840 D

          Technical details
          turning diameter over bed 2200 mm︱turning diameter over slide rest 2200 mm︱turning length 10000-11000 mm︱control Sinumerik 840 D︱workpiece weight 70.000 kg︱faceplate 2000 mm︱steady 2 ︱Torque 125000 Nm︱feed 0,3-4000 mm/min︱rapid traverse 4000 mm/min︱roll stand ︱total power requirement 110 kW︱weight of the machine ca. 120 t︱dimensions of the machine ca. 22x6,2x2,9 m︱
            turning diameter over bed 2200 mm
            turning diameter over slide rest 2200 mm
            turning length 10000-11000 mm
            control Sinumerik 840 D
            workpiece weight 70.000 kg
            faceplate 2000 mm
            steady 2
            Torque 125000 Nm
            feed 0,3-4000 mm/min
            rapid traverse 4000 mm/min
            total power requirement 110 kW
            weight of the machine ca. 120 t
            dimensions of the machine ca. 22x6,2x2,9 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe WOHLENBERG PT1 1070


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03683 · Heavy Duty Lathe

          WOHLENBERG - PT1 1070 - - 1987 - Siemens

          Technical details
          turning diameter over bed 1100 mm︱turning diameter over slide rest 780 mm︱turning length 4100 mm︱Control Siemens ︱type 840 D ︱bed width 710 mm︱faceplate 1000 mm︱turning speeds 1110 U/min︱total power requirement 4,79-69 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 1100 mm
            turning diameter over slide rest 780 mm
            turning length 4100 mm
            Control Siemens
            type 840 D
            bed width 710 mm
            faceplate 1000 mm
            turning speeds 1110 U/min
            total power requirement 4,79-69 kW


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe WEISSER-HEILBRONN Gigant - CNC


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S5275 · Heavy Duty Lathe

          WEISSER-HEILBRONN - Gigant - CNC - - 1982 - Siemens Sinumerik 840D

          Technical details
          turning length 2000 mm︱turning diameter 1200 mm︱centre height 600 mm︱control Siemens Sinumerik 840D
            turning length 2000 mm
            turning diameter 1200 mm
            centre height 600 mm
            control Siemens Sinumerik 840D
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCG 125


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12253C · Heavy Duty Lathe

          POREBA - TCG 125 - - 1980 -

          Technical details
          turning diameter over slide rest 940 mm︱turning length 10000 mm︱turning diameter 1250 mm︱spindle diameter 105 mm︱speed 1,6 - 315 (x24) m/min︱voltage 380 V︱total power requirement 75 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          4-jaw faceplate Power compound
            turning diameter over slide rest 940 mm
            turning length 10000 mm
            turning diameter 1250 mm
            spindle diameter 105 mm
            speed 1,6 - 315 (x24) m/min
            voltage 380 V
            total power requirement 75 kW
            Description :
            4-jaw faceplate
            Power compound


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCF 224


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12276C · Heavy Duty Lathe

          POREBA - TCF 224 - - 1980 - Siemens

          Technical details
          turning diameter over bed 2240 mm︱turning diameter over slide rest 1790 mm︱turning length 1250 mm︱turning speeds 0,5-250 U/min︱spindle bore 105 mm︱workpiece weight 30 t︱steady 400-700 mm︱steady 700-1200 mm︱steady 1000-1600 mm︱control Siemens ︱total power requirement 75/110 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 2240 mm
            turning diameter over slide rest 1790 mm
            turning length 1250 mm
            turning speeds 0,5-250 U/min
            spindle bore 105 mm
            workpiece weight 30 t
            steady 400-700 mm
            steady 700-1200 mm
            steady 1000-1600 mm
            control Siemens
            total power requirement 75/110 kW


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCF 229


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02113 · Heavy Duty Lathe

          POREBA - TCF 229 - - 1980 - Siemens

          Technical details
          turning diameter over bed 1930 mm︱turning diameter over slide rest 1520 mm︱turning length 5000 mm︱turning speeds 0,5-250 U/min︱spindle bore 105 mm︱workpiece weight 35 t︱steady 400-700 mm︱steady 700-1200 mm︱steady 1000-1600 mm︱control Siemens ︱total power requirement 106 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 1930 mm
            turning diameter over slide rest 1520 mm
            turning length 5000 mm
            turning speeds 0,5-250 U/min
            spindle bore 105 mm
            workpiece weight 35 t
            steady 400-700 mm
            steady 700-1200 mm
            steady 1000-1600 mm
            control Siemens
            total power requirement 106 kW


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCG125


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12415CH · Heavy Duty Lathe

          POREBA - TCG125 - - 1977 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 940 mm︱turning length 600 mm︱centre distance 6200 mm︱spindle speed: 1.6-315 U/min︱tailstock quill diameter 200 mm︱workpiece weight 30 t︱workpiece weight max. 40 t︱steady 3 ︱digital readout ︱total power requirement 75 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 11x2,4x1,9 m︱drive motor 75 kW︱
            turning diameter over bed 1250 mm
            turning diameter over slide rest 940 mm
            turning length 600 mm
            centre distance 6200 mm
            spindle speed: 1.6-315 U/min
            tailstock quill diameter 200 mm
            workpiece weight 30 t
            workpiece weight max. 40 t
            steady 3
            total power requirement 75 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 11x2,4x1,9 m
            drive motor 75 kW
            Description :



        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer:

          RAVENSBURG -