.
Avrupa stok makineleri satıcıları ağı
+ 49 (0) 2389 5299080
Arama servisi Kullanılmış makineleri sat

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:
             Görünüm: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2020

          1. machine-categorie:
          2. Metal Processing
          3. Lathes
          4. Bench Lathe

          Bench Lathe

          Machinelist: Bench Lathe

          Bench Lathe

          used Lathes Bench Lathe KAMI DKM 250V.550

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Norton Profi

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn Vario mit MFB Vario

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78005 · Bench Lathe

          ELMAG - Superturn Vario mit MFB Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱
          3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            bore capacity in steel 16 mm
            throat 169 mm
            quill stroke 50 mm
            turning speed range - drilling 50 - 2250 U/min
            spindle drive 0,5 kW
            total power requirement 0,75 kW
            weight of the machine ca. 0,175 t
            dimensions of the machine ca. 1,3 x 0,65 x 1,3 m
            Description :
            3-axis LCD digital display system
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L-1

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn 250 x 550 Vario

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78004 · Bench Lathe

          ELMAG - Superturn 250 x 550 Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱
          longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,6 m
            Description :
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Bench Lathe SCHAUBLIN 102 N

          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz
          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4180 · Bench Lathe

          SCHAUBLIN - 102 N - - -

          Technical details
          centre height 102 mm︱Distance between centres 450 mm︱turning dia. over face-slide 120 mm︱turning diameter over bed 200 mm︱spindle taper: W20 ︱spindle bore 22 mm︱number of spindle speeds 18 ︱from/to 45-2500 U/min︱tailstock quill taper MT 2 ︱diameter of quill 30 mm︱quill stroke 110 mm︱dimensions of the machine ca. 1500x800x1400 mmxmmxmm︱weight 380 kg︱accessories and equipment: ︱3-jaw-chuck diameter 100 mm︱quick change tool holder: ︱make MULTIFIX ︱boring chuck 1 ︱misc. accessories ︱
            centre height 102 mm
            Distance between centres 450 mm
            turning dia. over face-slide 120 mm
            turning diameter over bed 200 mm
            spindle taper: W20
            spindle bore 22 mm
            number of spindle speeds 18
            from/to 45-2500 U/min
            tailstock quill taper MT 2
            diameter of quill 30 mm
            quill stroke 110 mm
            dimensions of the machine ca. 1500x800x1400 mmxmmxmm
            weight 380 kg
            3-jaw-chuck diameter 100 mm
            make MULTIFIX
            boring chuck 1


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

          • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe - cycle-controlled KRAFT Smart T-8

          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland
          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-95105 · Lathe - cycle-controlled

          KRAFT - Smart T-8 - - Fabrikneu - SPS

          Technical details
          turning diameter 800 mm︱turning length 3000/4000/5000 mm︱control SPS ︱bed width 600 mm︱max. swing over slide 480 mm︱spindle taper A-11 ︱spindle bore 104 mm︱spindle speed 14-1000 1/min︱with constant cutting speed und stufenloser Drehzahl ︱transmission ratio 4-stufig ︱tailstock quill diameter 75 mm︱tailstock quill stroke 150 mm︱chuck size 350 mm︱rapid traverse x/z 4/8 m/min︱tailstock quill diameter 100 mm︱tailstock quill stroke 250 mm︱taper of tailstock quill 5 MK︱frequency conversion motor power 15 kW︱weight of the machine ca. 6.5 / 7.5 / 8.5 t︱dimensions of the machine ca. 5085x1780x1780 / 6085x178 mm︱
          100 % before loading warranty: 12 month main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China
            turning diameter 800 mm
            turning length 3000/4000/5000 mm
            control SPS
            bed width 600 mm
            max. swing over slide 480 mm
            spindle taper A-11
            spindle bore 104 mm
            spindle speed 14-1000 1/min
            with constant cutting speed und stufenloser Drehzahl
            transmission ratio 4-stufig
            tailstock quill diameter 75 mm
            tailstock quill stroke 150 mm
            chuck size 350 mm
            rapid traverse x/z 4/8 m/min
            tailstock quill diameter 100 mm
            tailstock quill stroke 250 mm
            taper of tailstock quill 5 MK
            frequency conversion motor power 15 kW
            weight of the machine ca. 6.5 / 7.5 / 8.5 t
            dimensions of the machine ca. 5085x1780x1780 / 6085x178 mm
            Description :
            100 % before loading

            warranty:
            12 month

            main features:
            -high speed
            -high spindle torque
            -big spindle bore
            -automatic forced lubrication
            -hardened and ground guideways
            -brand-new design eterior
            -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled KRAFT ZDM 650

          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland
          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-91066 · Lathe - cycle-controlled

          KRAFT - ZDM 650 - - Fabrikneu - Siemens 808D

          Technical details
          turning diameter 652 mm︱turning length 1000/1500/2000/3000 mm︱control Siemens 808D ︱turning diameter over slide rest 595 mm︱centre height 325 mm︱bed width 350 mm︱ 360 kg︱spindle taper 5 MK︱spindle nose A2-8 ︱spindle bore 80/105/155 mm︱spindle turning speed range 30-1700 (3) U/min︱longitudinal feed 0-5000 mm/U︱cross feed 0-5000 mm/U︱diameter of quill 95 mm︱sleeve conus 5 MK︱quill stroke 220 mm︱fixed steady: Ø 10-125 (110-200 opt.) mm︱with live steady Ø 10-80 mm︱power requirement 7,5 kW︱ 8605 DIN︱
          Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix
            turning diameter 652 mm
            turning length 1000/1500/2000/3000 mm
            control Siemens 808D
            turning diameter over slide rest 595 mm
            centre height 325 mm
            bed width 350 mm
            360 kg
            spindle taper 5 MK
            spindle nose A2-8
            spindle bore 80/105/155 mm
            spindle turning speed range 30-1700 (3) U/min
            longitudinal feed 0-5000 mm/U
            cross feed 0-5000 mm/U
            diameter of quill 95 mm
            sleeve conus 5 MK
            quill stroke 220 mm
            fixed steady: Ø 10-125 (110-200 opt.) mm
            with live steady Ø 10-80 mm
            power requirement 7,5 kW
            8605 DIN
            Description :
            Brand new Center Lathe KRAFT DLZ 200 Series

            More information can be found in the appendix


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled KRAFT ZDM 400

          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland
          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-91064 · Lathe - cycle-controlled

          KRAFT - ZDM 400 - - Fabrikneu - Siemens 808D

          Technical details
          turning diameter 402 mm︱turning length 750/1000 mm︱control 808 ︱turning diameter over slide rest 380 mm︱centre height 200 mm︱bed width 250 mm︱ 135 kg︱spindle taper 4 MK︱spindle nose A2-5 ︱spindle bore 42 mm︱spindle turning speed range 40-2800 (3) U/min︱longitudinal feed 0-5000 mm/U︱cross feed 0-5000 mm/U︱diameter of quill 58 mm︱sleeve conus 4 MK︱quill stroke 180 mm︱fixed steady: Ø 10-125 (110-200 opt.) mm︱with live steady Ø 10-80 mm︱power requirement 4 kW︱ 8605 DIN︱
          Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix
            turning diameter 402 mm
            turning length 750/1000 mm
            control 808
            turning diameter over slide rest 380 mm
            centre height 200 mm
            bed width 250 mm
            135 kg
            spindle taper 4 MK
            spindle nose A2-5
            spindle bore 42 mm
            spindle turning speed range 40-2800 (3) U/min
            longitudinal feed 0-5000 mm/U
            cross feed 0-5000 mm/U
            diameter of quill 58 mm
            sleeve conus 4 MK
            quill stroke 180 mm
            fixed steady: Ø 10-125 (110-200 opt.) mm
            with live steady Ø 10-80 mm
            power requirement 4 kW
            8605 DIN
            Description :
            Brand new Center Lathe KRAFT DLZ 200 Series

            More information can be found in the appendix


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled KRAFT ZDM 500

          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland
          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-91065 · Lathe - cycle-controlled

          KRAFT - ZDM 500 - - Fabrikneu - Siemens 808D

          Technical details
          turning diameter 502 mm︱turning length 1000/1500 mm︱control Siemens 808D ︱turning diameter over slide rest 305 mm︱centre height 250 mm︱bed width 300 mm︱ 225 kg︱spindle taper 4 MK︱spindle nose A2-6 ︱spindle bore 58/105 mm︱spindle turning speed range 40-2300(3) U/min︱longitudinal feed 0-5000 mm/U︱cross feed 0-5000 mm/U︱diameter of quill 58 mm︱sleeve conus 4 MK︱quill stroke 180 mm︱fixed steady: Ø 10-125 (110-200 opt.) mm︱with live steady Ø 10-80 mm︱power requirement 5,5 kW︱ 8605 DIN︱
          Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix
            turning diameter 502 mm
            turning length 1000/1500 mm
            control Siemens 808D
            turning diameter over slide rest 305 mm
            centre height 250 mm
            bed width 300 mm
            225 kg
            spindle taper 4 MK
            spindle nose A2-6
            spindle bore 58/105 mm
            spindle turning speed range 40-2300(3) U/min
            longitudinal feed 0-5000 mm/U
            cross feed 0-5000 mm/U
            diameter of quill 58 mm
            sleeve conus 4 MK
            quill stroke 180 mm
            fixed steady: Ø 10-125 (110-200 opt.) mm
            with live steady Ø 10-80 mm
            power requirement 5,5 kW
            8605 DIN
            Description :
            Brand new Center Lathe KRAFT DLZ 200 Series

            More information can be found in the appendix


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled KRAFT Smart T-Serie

          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland
          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-95106 · Lathe - cycle-controlled

          KRAFT - Smart T-Serie - - Fabrikneu - SPS

          Technical details
          Smart T-4 | Smart T-5 | S ︱turning diameter 400 | 500 | 630 mm︱turning length 1000 | 1000/1500/2000 | 1 mm︱control SPS ︱bed width 400 mm︱max. swing over slide 210 | 300 | 380 mm︱spindle taper A-6 | A-8 (A-11 opt.) | A ︱spindle bore 50 | 80 (104 opt.) | 104 mm︱spindle speed 30-2500 | 20-2000 | 20-20 1/min︱with constant cutting speed und stufenloser Drehzahl ︱transmission ratio 3-stufig ︱chuck size 200 | 250 | 315 mm︱rapid traverse x/z 2/4 m/min︱tailstock quill diameter 75 | 75 | 80 mm︱tailstock quill stroke 150 mm︱taper of tailstock quill 5 MK︱frequency conversion motor power 5,5 | 7,5 | 11 kW︱weight of the machine ca. 2000 | 2100/2300/2650 | 2 kg︱dimensions of the machine ca. s. Anlage mm︱electric handwheel ︱
          100 % before loading warranty: 12 month main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China
            Smart T-4 | Smart T-5 | S
            turning diameter 400 | 500 | 630 mm
            turning length 1000 | 1000/1500/2000 | 1 mm
            control SPS
            bed width 400 mm
            max. swing over slide 210 | 300 | 380 mm
            spindle taper A-6 | A-8 (A-11 opt.) | A
            spindle bore 50 | 80 (104 opt.) | 104 mm
            spindle speed 30-2500 | 20-2000 | 20-20 1/min
            with constant cutting speed und stufenloser Drehzahl
            transmission ratio 3-stufig
            chuck size 200 | 250 | 315 mm
            rapid traverse x/z 2/4 m/min
            tailstock quill diameter 75 | 75 | 80 mm
            tailstock quill stroke 150 mm
            taper of tailstock quill 5 MK
            frequency conversion motor power 5,5 | 7,5 | 11 kW
            weight of the machine ca. 2000 | 2100/2300/2650 | 2 kg
            dimensions of the machine ca. s. Anlage mm
            Description :
            100 % before loading

            warranty:
            12 month

            main features:
            -high speed
            -high spindle torque
            -big spindle bore
            -automatic forced lubrication
            -hardened and ground guideways
            -brand-new design eterior
            -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

          • 29.990 €
          Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled Kraft ZDM 500 m. Siemens 828/FANUC 0

          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland
          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-90758 · Lathe - cycle-controlled

          Kraft - ZDM 500 m. Siemens 828/FANUC 0 - - Fabrikneu - Siemens 828D

          Technical details
          turning diameter 500 mm︱turning length 750/1000/1500/2000 mm︱control Siemens 828D basic ︱max. swing over slide 280 mm︱bed width 400 mm︱spindle taper D8 ︱spindle speeds 7-2200 1/min.︱spindle bore 82 mm︱transmission ratio 3-stufen (auto) ︱tailstock quill diameter 75 mm︱tailstock quill stroke 150 mm︱taper of tailstock quill 5 MK︱x-travel 280 mm︱z travel 685/935/1435/1935 mm︱chuck size 315 mm︱taper of spindle bore 1:20 ︱rapid traverse x/z 4/8 m/min︱repeatability of toolpost 0.008 mm︱vertical 4-position toolpost changing time 2.4 s︱power requirement 7,5/11 kW︱
          +++SPECIAL PRICE+++SPECIAL OFFER+++ main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China All machines' functionalities will be checked and controlled before loading. The machines can be modified according to CE upon request. warranty: none
            turning diameter 500 mm
            turning length 750/1000/1500/2000 mm
            control Siemens 828D basic
            max. swing over slide 280 mm
            bed width 400 mm
            spindle taper D8
            spindle speeds 7-2200 1/min.
            spindle bore 82 mm
            transmission ratio 3-stufen (auto)
            tailstock quill diameter 75 mm
            tailstock quill stroke 150 mm
            taper of tailstock quill 5 MK
            x-travel 280 mm
            z travel 685/935/1435/1935 mm
            chuck size 315 mm
            taper of spindle bore 1:20
            rapid traverse x/z 4/8 m/min
            repeatability of toolpost 0.008 mm
            vertical 4-position toolpost cha. 2.4 s
            power requirement 7,5/11 kW
            Description :
            +++SPECIAL PRICE+++SPECIAL OFFER+++

            main features:
            -high speed
            -high spindle torque
            -big spindle bore
            -automatic forced lubrication
            -hardened and ground guideways
            -brand-new design eterior
            -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China

            All machines' functionalities will be checked and controlled before loading. The machines can be modified according to CE upon request.

            warranty: none


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

          • 36.900 €
          Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled PINACHO SE/200-42 X 750

          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland
          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-100354 · Lathe - cycle-controlled

          PINACHO - SE/200-42 X 750 - - 2020 - FAGOR 8037/Siemens 808D

          Technical details
          turning diameter 402 mm︱turning length 750 mm︱control FAGOR 8037 ︱turning dia. over face-slide 245 mm︱turning diameter over bed slide 380 mm︱bed width 250 mm︱spindle taper A2-5 ︱spindle speeds 40~2800 (3 Stufen) 1/min.︱spindle bore 42 mm︱tailstock quill diameter 58 mm︱tailstock quill stroke 180 mm︱taper of tailstock quill 4 MK︱max. length of work piece 750 mm︱power requirement 4 kW︱weight of the machine ca. 1050 kg︱dimensions of the machine ca. 2000x1115x1670 (LxBxH) mm︱turret 8 fach︱CNC controller FAGOR 8037 ︱European electric ︱coolant system ︱
          New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents
            turning diameter 402 mm
            turning length 750 mm
            control FAGOR 8037
            turning dia. over face-slide 245 mm
            turning diameter over bed slide 380 mm
            bed width 250 mm
            spindle taper A2-5
            spindle speeds 40~2800 (3 Stufen) 1/min.
            spindle bore 42 mm
            tailstock quill diameter 58 mm
            tailstock quill stroke 180 mm
            taper of tailstock quill 4 MK
            max. length of work piece 750 mm
            power requirement 4 kW
            weight of the machine ca. 1050 kg
            dimensions of the machine ca. 2000x1115x1670 (LxBxH) mm
            turret 8 fach
            CNC controller FAGOR 8037
            Description :
            New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD

            Made in Europe

            For more information please see the attached documents


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled SEIGER SLZ 500E - 1000

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20337 · Lathe - cycle-controlled

          SEIGER - SLZ 500E - 1000 - - 2019 - Siemens 840D

          Technical details
          turning diameter 500 mm︱centre distance 1000 mm︱control Siemens 840D ︱swing diameter over face slide 280 mm︱spindle head Gr 8 ︱spindle bore 93 mm︱spindle diameter in front bearing 130 mm︱main drive motor 25 kW︱turning speed range 1 - 3000 U/min︱tailstock quill taper MT 5 ︱tailstock quill diameter 90 mm︱tailstock travel 180 mm︱total power requirement 34 kVA︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 4,4 x 2,2 x 1,97 m︱
          - Control unit Siemens 840D - 3-jaw chuck - Support with 2 tool holders ( - steady rest - Tailstock ( air pressure supported ) - chip conveyor - Coolant system * only 5720h operating hours * very good condition
            turning diameter 500 mm
            centre distance 1000 mm
            control Siemens 840D
            swing diameter over face slide 280 mm
            spindle head Gr 8
            spindle bore 93 mm
            spindle diameter in front bearin. 130 mm
            main drive motor 25 kW
            turning speed range 1 - 3000 U/min
            tailstock quill taper MT 5
            tailstock quill diameter 90 mm
            tailstock travel 180 mm
            total power requirement 34 kVA
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 4,4 x 2,2 x 1,97 m
            Description :
            - Control unit Siemens 840D
            - 3-jaw chuck
            - Support with 2 tool holders (
            - steady rest
            - Tailstock ( air pressure supported )
            - chip conveyor
            - Coolant system

            * only 5720h operating hours
            * very good condition


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled KRAFT (JAP) SM18 250 x 1500

          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland
          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-100440 · Lathe - cycle-controlled

          KRAFT (JAP) - SM18 250 x 1500 - - 2019 - Siemens 808D

          Technical details
          turning diameter 500 mm︱turning length 1500 mm︱control Siemens 808D ︱turning diameter over bed slide 290 mm︱bed width 350 mm︱spindle taper 6 Camlock︱spindle speeds 0-1080 (2 Stufen) 1/min.︱spindle bore 58 mm︱tailstock quill diameter 95 mm︱tailstock quill stroke 220 mm︱taper of tailstock quill 5 MK︱max. length of work piece 1500 mm︱power requirement 5,5 kW︱weight of the machine ca. 2200 kg︱Machine size (LxWxH) 3525x1370x1910 mm︱turret 4-fach automatisch progra ︱CNC controller Siemens 808 ︱European electric ︱CE-design ︱coolant system ︱
          New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents
            turning diameter 500 mm
            turning length 1500 mm
            control Siemens 808D
            turning diameter over bed slide 290 mm
            bed width 350 mm
            spindle taper 6 Camlock
            spindle speeds 0-1080 (2 Stufen) 1/min.
            spindle bore 58 mm
            tailstock quill diameter 95 mm
            tailstock quill stroke 220 mm
            taper of tailstock quill 5 MK
            max. length of work piece 1500 mm
            power requirement 5,5 kW
            weight of the machine ca. 2200 kg
            Machine size (LxWxH) 3525x1370x1910 mm
            turret 4-fach automatisch progra
            CNC controller Siemens 808
            Description :
            New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD

            Made in Europe

            For more information please see the attached documents


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled UNITECH UT 560

          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland
          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3666 · Lathe - cycle-controlled

          UNITECH - UT 560 - - 2014 - Siemens Sinumerik 828 D

          Technical details
          greates pass round over bed 560 mm︱turning length 1500 mm︱control Siemens Sinumerik 828 D ︱swing diameter over slide rest 390 mm︱spindle speed: 2400 Upm︱bed width 345 mm︱spindle bore 80 mm︱diameter of quill 75 mm︱quill stroke 200 mm︱tailstock quill taper MT 5 ︱3-jaw chuck Schunk Rota S 315 ︱3-jaw-chuck diameter 315 mm︱main drive 14 kW︱weight of the machine ca. 2900 kg︱dimensions of the machine ca. m︱
          removeable bed bridge user interface control: Shopturn hydraulical tailstock quill adjustment key bar chuck Schunk Rota S+ 2.0 315-92 quick change tool holder Choromant Capto
            greates pass round over bed 560 mm
            turning length 1500 mm
            control Siemens Sinumerik 828 D
            swing diameter over slide rest 390 mm
            spindle speed: 2400 Upm
            bed width 345 mm
            spindle bore 80 mm
            diameter of quill 75 mm
            quill stroke 200 mm
            tailstock quill taper MT 5
            3-jaw chuck Schunk Rota S 315
            3-jaw-chuck diameter 315 mm
            main drive 14 kW
            weight of the machine ca. 2900 kg
            Description :
            removeable bed bridge

            user interface control: Shopturn

            hydraulical tailstock quill adjustment

            key bar chuck Schunk Rota S+ 2.0 315-92

            quick change tool holder Choromant Capto






        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled PINACHO Smart turn 8 225

          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich
          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03977 · Lathe - cycle-controlled

          PINACHO - Smart turn 8 225 - - 2013 - FAGOR TC 8055

          Technical details
          turning diameter 450 mm︱turning length 1500 mm︱control FAGOR TC 8055︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2.29X1 X 1.2 m︱
          TEACH IN CNC LATHE Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate machine up to 450 mm in swing over bed, 1500 mm in distance between centers and 65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL. The available power up to 15 kW in addition to the high rotary speed and low vibrations provided by the servomotor and headstock design make the ST-225 an authentic leader in its category.
            turning diameter 450 mm
            turning length 1500 mm
            control FAGOR TC 8055
            total power requirement 15 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2.29X1 X 1.2 m
            Description :
            TEACH IN CNC LATHE
            Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate
            machine up to 450 mm in swing over bed, 1500 mm in distance between centers and
            65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL.
            The available power up to 15 kW in addition to the high rotary speed and low
            vibrations provided by the servomotor and headstock design make the ST-225 an
            authentic leader in its category.


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled CAZENEUVE OPTIMAX 360

          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz
          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4829 · Lathe - cycle-controlled

          CAZENEUVE - OPTIMAX 360 - - 2013 - SIEMENS

          Technical details
          turning diameter 380 mm︱turning length 700 mm︱control SIEMENS ︱spindle turning speed - stepless 2500 U/min︱tailstock quill taper MT 4 ︱weight 1.5 t︱dimensions of the machine ca. 2000x1400x1820 mmxmmxmm︱
            turning diameter 380 mm
            turning length 700 mm
            control SIEMENS
            spindle turning speed - stepless 2500 U/min
            tailstock quill taper MT 4
            weight 1.5 t
            dimensions of the machine ca. 2000x1400x1820 mmxmmxmm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled WAGNER WDE 500

          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland
          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20401 · Lathe - cycle-controlled

          WAGNER - WDE 500 - - 2010 - Sinumerik

          Technical details
          centre height 250 mm︱centre distance 1500 mm︱turning diameter over bed 500 mm︱turning diameter over slide 280 mm︱turning length 1500 mm︱spindle taper D8 ︱control Sinumerik ︱bed width 390 mm︱spindle bore 82 mm︱turning speed range 45-2000 U/min︱rapid travel - longitudinal/face 8/4 m/min︱3-jaw-chuck diameter 250 mm︱quick change toolholder System Multifix ︱drive capacity - spindle motor 6,5 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 75 mm︱quill stroke 150 mm︱coolant 3,0 ︱voltage 400 V︱total power requirement 24 kVA︱
          - Serial-No. G01262 - Control: Sinumerik 802 C
            centre height 250 mm
            centre distance 1500 mm
            turning diameter over bed 500 mm
            turning diameter over slide 280 mm
            turning length 1500 mm
            spindle taper D8
            control Sinumerik
            bed width 390 mm
            spindle bore 82 mm
            turning speed range 45-2000 U/min
            rapid travel - longitudinal/face 8/4 m/min
            3-jaw-chuck diameter 250 mm
            quick change toolholder System Multifix
            drive capacity - spindle motor 6,5 kW
            taper in tailstock-quill MK 5
            dia. of quill 75 mm
            quill stroke 150 mm
            coolant 3,0
            voltage 400 V
            total power requirement 24 kVA
            Description :
            - Serial-No. G01262
            - Control: Sinumerik 802 C


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled HARRISON ALPHA 2800XS

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1528 · Lathe - cycle-controlled

          HARRISON - ALPHA 2800XS - - 2010 - FANUC 21i-TB

          Technical details
          turning length 1.200 mm︱Height of centres 400 mm︱swing over bed 800 mm︱diameter over cross-slide max. 510 mm︱control FANUC 21i-TB ︱spindle bore 250 mm︱
          Lathe - cycle-controlled | HARRISON - ALPHA 2800XS The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: a 2800XS | ALPHA2800XS | ALPHA-2800XS | ALPHA 2800 | ALPHA2800 | ALPHA- 2800
            turning length 1.200 mm
            Height of centres 400 mm
            swing over bed 800 mm
            diameter over cross-slide max. 510 mm
            control FANUC 21i-TB
            spindle bore 250 mm
            Description :
            Lathe - cycle-controlled | HARRISON - ALPHA 2800XS


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: a 2800XS | ALPHA2800XS | ALPHA-2800XS | ALPHA 2800 | ALPHA2800 | ALPHA-
            2800


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Lathes Lathe - cycle-controlled SEIGER SLZ 620E

          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland
          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032992 · Lathe - cycle-controlled

          SEIGER - SLZ 620E - - 2010 - Sinumerik 840D SL

          Technical details
          turning diameter 660 mm︱centre distance 3000 mm︱control Sinumerik 840D SL ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱turning length mm︱
          Sinumerik 840D SL control 3-jaw chuck diameter 315mm 4-fold Parat tool holder device steady rest 12mm – 150mm steady rest 120mm – 270mm tail stock chip conveyor coolant device Technische Daten / technical details: Spitzenweite / center to center 3000 mm Umlufdurchmesser über Bett / rotary diameter over bed 660 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 435 mm Spindelbohrung / spindle hole 93 mm Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-2500 UpM /rpm Eilgang X, Z / rapid feed X, Z 8/10 m/min Reitstockaufnahme / tail stock taper MK6 Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 22/30 kW Gewicht der Maschine ca. / weight ca. 6300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 660 mm
            centre distance 3000 mm
            control Sinumerik 840D SL
            Description :
            Sinumerik 840D SL control
            3-jaw chuck diameter 315mm
            4-fold Parat tool holder device
            steady rest 12mm – 150mm
            steady rest 120mm – 270mm
            tail stock
            chip conveyor
            coolant device

            Technische Daten / technical details:
            Spitzenweite / center to center 3000 mm
            Umlufdurchmesser über Bett / rotary diameter over bed 660 mm
            Umlaufdurchmesser über Schlitten / rotary diameter over sledge 435 mm
            Spindelbohrung / spindle hole 93 mm
            Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-2500 UpM /rpm
            Eilgang X, Z / rapid feed X, Z 8/10 m/min
            Reitstockaufnahme / tail stock taper MK6
            Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 22/30
            kW
            Gewicht der Maschine ca. / weight ca. 6300 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   
            •
          TOP Manufacturer:

          KAMI - HBM - ELMAG - SCHAUBLIN -

          Özet
          Software
          Kullanılan makineler içeriği
          Gizlilik
          Bizi takip edin
          © 2000-2024, Logotech oHG · Yazılım ve İnternet Hizmetleri - Tüm hakları saklıdır