Milling machines

x-travel 3.000 mm︱y-travel 1.700 mm︱z-travel 1.500 mm︱Control HEIDENHAIN TNC 530 HSCI ︱table-size 3.200 x 1.100 mm︱T-slots 7 ︱T - slots distance 150 mm︱T-slot - distance 22 mm︱table weight 8.000 Kg︱rapid travel x/y/z 20.000 mm/min︱feed 10.000 m/min︱milling head -swivable +/- 45° UAD/ 0.1º/0.1º °︱tool taper ISO-50 DIN 69871 AD ︱spindle turning speed range 60 – 6.000 U/min︱transmission ratio 2 ︱Spindle power 38 ︱Tools changer 30 fach/tools︱Internal cooling system 40 bar︱Chip coveyor Quer ︱Chip coveyor Längs ︱

---

x-travel 1200 mm︱y-travel 600 mm︱z-travel 600 mm︱turning speeds 15 - 2000 1/min︱spindle 9 kW︱taper ISO 40 ︱control HEIDENHAIN TNC 124 ︱table-size 1.700 x 470 mm︱table load 2 t︱rapid traverse longitudinal and cross 10 m/min︱rapid traverse vertical 4 m/min︱total power requirement 18 kVA︱weight of the machine ca. 6,5 t︱

---

UNIVERSAL HEAD HURON GEAR BOX HEIDENHAIN TNC 12 manuals,

CNC brand Heidenhain ︱CNC model ITNC 530 ︱Table length 15000 mm︱Table width 2500 mm︱X 14000 mm︱Y 3000 mm︱Z 1500 mm︱Spindle taper SK50 ︱Number of pallets 1 ︱Rapid traverse 25 m/min︱Tool changer 60 ︱Torque 1822 Nm︱Indexing per 2,5 °︱

---

Movable column Spindle: 50/63 kW CNC controlled milling head Control 1: 29766 H. Run program: 9655 H.

x-travel 950 mm︱y-travel 400 mm︱z-travel 500 mm︱tool taper ISO 50 ︱throat 510 mm︱quill stroke 105 mm︱spindle turning speed range 18 - 1800 U/min︱feeds 16 - 627 mm/min︱rapid traverse 1670 mm/min︱table-size 1400 x 400 mm︱table load capacity 500 kg︱T-slots 3x14x100 mm︱distance spindle /table 150 - 650 mm︱engine output 9,0 kW︱weight 3660 kg︱dimensions of the machine ca. 2290 x 1770 x 2120 mm︱

---

** current new price approx. 60.000 euros ** Special price on request The heavy universal bed milling machine offers wide guides and high Drive power for superior cutting performance and is with your Extensive equipment ideal for plant and mechanical engineering suitable. The heavy vertical milling head can be swiveled right and left, The quill can be moved manually and the spindle speed can be adjusted continuously regulate. The feed in the Y and X axes can be done via a robust Manual transmission can be varied. All axes have rapid traverse and the Large clamping table offers plenty of space for workpieces and clamping devices. It is not the machine table (with the workpiece) that is moved in the Z axis, but rather the milling head - greater stability and lower vibrations lead to more Precision with very high table load capacity! This is further reinforced Effect through the large, heavy gray cast iron frame (Meehanite) and the extremely wide flat guides. Furnishing : - Continuous speed regulation by frequency converter - Rigid right-angle guides guarantee lasting accuracy - Meehanite gray cast iron frame - ± 30° swiveling milling head - Hardened and ground guideways in all axes - The machine is equipped with a 3-axis position display as standard * Greater work accuracy * Lower error rate * Greater manufacturing reliability * Significant time savings * Increased productivity * Easy to read display * User friendly features * Clearly arranged keyboard * Resolution 0.01/0.005mm - Central lubrication - Coolant device - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9131205

x-travel 3500 mm︱y-travel 1000 mm︱z-travel 1250 mm︱table-size 2.000 x 700 mm︱workpiece weight 3500 kg︱drive capacity - spindle motor 17 kW︱spindle cone 50 ISO︱spindle turning speed range 3000 U/min︱dimensions of the machine ca. 5265 x 3250 x 2730 m︱weight of the machine ca. 9 t︱chip conveyor ︱CNC controller HEIDENHAIN TNC-426 ︱ manuell ︱ ︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 3500 mm︱y-travel 1200 mm︱z-travel 1250 mm︱table-size 3700x1000 mm︱workpiece weight kg︱drive capacity - spindle motor 24 kW︱spindle cone 50 ISO︱spindle turning speed range 20 - 3000 U/min︱dimensions of the machine ca. m︱weight of the machine ca. 18 t︱CNC controller Heidenhain iTNC 530 ︱ Auto-indexing UDG (2.5º) ︱ HR-410 ︱automatic tool changer 20 fach︱chip conveyor ︱coolant system Innenkühlung:20 bar - mi ︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 2500 mm︱y-travel 1000 mm︱z-travel 1500 mm︱table-size 2.800 x 1000 mm︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 3500 mm︱y-travel 1000 mm︱z-travel 1000 mm︱table-size 2300 x 900 mm︱workpiece weight 3500 kg︱drive capacity - spindle motor 22 kW︱spindle cone 50 ISO︱spindle turning speed range 4000 U/min︱dimensions of the machine ca. 6114 x 5070 x 2803 m︱weight of the machine ca. 14 t︱CNC controller Heidenhain TNC 530 ︱ manuell ︱ ︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 2.000 mm︱y-travel 1.000 mm︱z-travel 800 mm︱total power requirement 47 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. m︱

---

CNC Bed Type Milling Machine - Universal / Brand: SORALUCE / Type: TA-20 / Year of construction: 2005 The machine can be inspected by appointment under working condition. Condition: Functional / ready for operation (no repair backlog). Operating hours (June 2023): - Control on: 31.517 h - Machine on: 31.759 h - Program run: 13.409 h TECHNICAL DETAILS: Travels: - X-axis: 2.000 mm - Y-axis: 1.000 mm - Z-axis: 800 mm NC rotary table: - Table dimensions: 1.000 x 1.000 mm, integrated as 4th axis in the machine - T-Slots: 6 x 22 H12 - Reference slot 3 (1 x centered and 2 x penultimate slot outside): 1 x 22 H8 - Slot distance: 140 mm - Table load max.: 3 t, Position accuracy: +/- 5" - Feed range X-, Y-, Z-axis: 10 -10.000 mm/min - Rapid traverse X-, Y-, Z-axis: 25.000 mm/min EQUIPMENT: - CNC-Path control: Heidenhain iTNC 530 with TFT flat screen 15", operating pendulum - High-Speed Vertical milling head with integrated high-frequency spindle and vertical swiveling of +/- 92°. The vertical swivel plane is a full NC axis and can be programmed via the with a very fine resolution of 0.001° via the machine control. resolution. Loosening and clamping of the vertical milling head is performed hydraulically The high-frequency spindle in the vertical milling head has the following technical data: * Speed: 25 - 16.000 rpm * Tool holder: HSK 63 A * Power: 24 kW * Torque: 76 Nm * Tool clamping: Automatic * Transmittable torque B axis: 680 Nm * Division B-axis: 0,001° * Holding torque B-axis: 1.500 Nm * Drive motor: Siemens servo motor The electrical supply lines and the coolant supply to the vertical head are vertical head are carried out externally. - Extended splash guard for the use of a NC rotary table, 4-sided with viewing window, height: 2.200 mm, Fronttüre mit Öffnungsweite: 1.700 mm. Operation is exclusively from the front side - Chip conveyor - Telescopic cover in the X-axis in HSC design - Air/oil Minimum quantity lubrication through the spindle (HSK 63 A) - Heidenhain AC drive motors in all axes with digital drive technology - INA-Linear motion guide system in all axes - Direct linear measuring system Heidenhain in all axes - Telescopic covers of the X-axis guides - Automatic cycle lubrication for all axes and motion elements - Electrical equipment, brand: Siemens/Heidenhain - Hydraulic system, brand: Rexroth - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

x-travel 2500 mm︱y-travel 800 mm︱z-travel 800 mm︱table-size 2.500 x 700 mm︱workpiece weight 4000 kg︱drive capacity - spindle motor 22 kW︱spindle cone 50 ISO︱spindle turning speed range 20 - 3000 U/min︱dimensions of the machine ca. 7800 x 3315 x 2730 m︱weight of the machine ca. 11 t︱CNC controller Heidenhain TNC 426 ︱ Auto-indexing UDG (2.5º) ︱ HR-410 ︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 3.000 mm︱y-travel 1.000 mm︱z-travel 1.000 mm︱control iTNC 530 HEIDENHAIN︱table-size 3.230 x 1.050 mm︱table load 8,0 t︱spindle taper ISO 50 ︱tool change unit 24 Pos.︱spindle turning speed range 30 - 3.500 U/min︱drive capacity - spindle motor 25 kW︱feed stepless 1 - 5.000 mm/min︱rapid traverse 10,0 m/min︱chip conveyor Spiralförderer ︱voltage 380 V︱total power requirement 35 kVA︱weight of the machine ca. 12,0 t︱dimensions of the machine ca. 7,40 x 3,65 x 3,60 m︱hydraulic power unit 1,40 x 0,50 x 0,60 m︱ 0,45 x 0,70 x 0,85 m︱

---

- Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed

x-travel 4000 mm︱y-travel 1200 mm︱z-travel 1500 mm︱table-size 4200x1000 mm︱workpiece weight 13000 kg︱drive capacity - spindle motor 22 kW︱spindle cone 50 ISO︱spindle turning speed range 40 - 3000 U/min︱dimensions of the machine ca. m︱weight of the machine ca. t︱CNC controller Heidenhain TNC 530 ︱ Auto-indexing UDG (2.5º) ︱ HR-410 ︱automatic tool changer fach︱chip conveyor ︱coolant system Innenkühlung:20 bar - mi ︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 2000 mm︱y-travel 800 mm︱z-travel 800 mm︱table-size 2.000 x 700 mm︱workpiece weight 3500 kg︱drive capacity - spindle motor 17 kW︱spindle cone 50 ISO︱spindle turning speed range 3000 U/min︱dimensions of the machine ca. 5265 x 3250 x 2730 m︱weight of the machine ca. 9 t︱chip conveyor ︱CNC controller HEIDENHAIN TNC-426 ︱ manuell ︱ ︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 2600 mm︱y-travel 1000 mm︱z-travel 1000 mm︱table-size 3.600 x 900 mm︱max. workpiece weight 8.000 kg︱no. of flutes 6 ︱groove width 22 mm︱flute distance 125 ︱spindle taper ISO 50 DIN 69871 ︱number of spindle speeds 4.000 (2 Steps 0 - 1.000, U/min︱feed speeds 10 - 5.000 mm/min︱rapid speed 10.000 / 10.000 / 10.000 mm/min︱dimensions of the machine ca. 9,82 x 5,1 x 3,16 m︱weight of the machine ca. 21,5 t︱Control ︱

---

Engine: Spindle drive motor: 29 kW Feed drive motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer

x-travel 3000 mm︱y-travel 1200 mm︱z-travel 1000 mm︱table-size 3500x1100 mm︱workpiece weight 8000 kg︱drive capacity - spindle motor 22 kW︱spindle cone 50 ISO︱spindle turning speed range 2000 U/min︱dimensions of the machine ca. 7.700 x 4.467 x 3.320 m︱weight of the machine ca. 22 t︱CNC controller Heidenhain TNC 415 ︱ 3° ︱

---

Overhauled universal milling machine Correa A30 with Heidenhain control 415 Other technical specifications and accessories, as defined in Appendix. Other special options to retrofit. Images machine in the overhaul. Warranty: 6 months on parts Take advantage of the favorable leasing and rental conditions of ABC Leasing. Ask us about it. Of course, you will get the free delivery, installation / commissioning and operational hand-over and control training. The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 2000 mm︱y-travel 800 mm︱z-travel 1500 mm︱Control Heidenhain TNC 426/430MN ︱table surface area 2200 x 750 mm︱spindle taper ISO 50 P.D.B. ︱volt 380 V︱spindle speeds: 195 - 4000 ︱total power requirement 36 HP︱dimensions of the machine ca. m︱

---

x-travel 2000 mm︱y-travel 920 mm︱z-travel 900 mm︱table surface area 2200 x 750 mm︱table load 3 t︱number of T-slots 6 ︱T - slots - width 18 mm︱T - slots distance 120 mm︱spindle taper ISO 50 DIN 69871-B ︱spindle speed max. 3000 U/min︱transmission ratio 1 ︱speeds infinitely variable range 1 60 - 3000 U/min︱weight of the machine ca. 21,6 t︱feeds longditudinal/cross/vertical 0 - 5000 mm/min︱rapid traverse 15000 mm/min︱total power requirement 38 kw︱weight of the machine ca. 11 t︱

---

Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled

x-travel 2000 mm︱y-travel 800 mm︱z-travel 800 mm︱Control HEIDENHAIN TNC 426 ︱total power requirement kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱

---

This SACHMAN is in good condition and is available immediately.

x-travel 2500 mm︱y-travel 800 mm︱z-travel 800 mm︱control Heidenhain TNC 426 ︱table weight 3500 Kg︱table-size 2500 x 700 mm︱number of spindle speeds 50-4000 U/min/rpm︱Power 22 KW︱taper ISO 50 ︱weight of the machine ca. 10.500 kg︱dimensions of the machine ca. 6605x3315x2730 m︱

---

Control Heidenhain TNC 430CB ︱Table dimensions 9500x1200 mm︱Table load 5000/47500 kg︱Movement X-axis 9000 mm︱Movement Y-axis 1500 mm︱Movement Z-axis 1500 mm︱B-Axis travel 1x 1 °︱Spindle speed 1 50-750 1/min︱Spindle speed 2 750-3000 1/min︱Spindle taper DIN 69871/SK50 ︱Magazin capacity 60 ︱Required floor space 18830x6470 mm︱Length mm︱Depth mm︱Height 4025 mm︱Weight 61620 kg︱

---

x-travel 1400 mm︱y-travel 650 mm︱z-travel 705 mm︱table-size 1700 X 650 mm︱T-slots 4 ︱T-slot - width 18 mm︱taper ISO 50 ︱turning speeds 20-3000 U/min︱spindle motor 20 kW︱feed 2- 5000 mm/min︱rapid traverse: 11 mm/min︱table load 2500 Kg︱control HEIDENHAIN TNC-430 ︱weight of the machine ca. 7 t︱dimensions of the machine ca. 4389 x 2,7 x 2,4 m︱

---

manual milling head hydraulic tool clamping CNC CONTROL HEIDENHAIN TNC 430 VERY NICE LIKE NEW

x-travel 2000 mm︱y-travel 905 mm︱z-travel 910/760 mm︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 1350 mm︱y-travel 650 mm︱z-travel 650 mm︱Control Heidenhain ︱type TNC 426 ︱milling-head swivable +/- 90 °︱spindle taper ISO 40 ︱table surface area 1600x800 mm︱chip conveyor ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

travel -x axis 2500 mm︱travel -y axis 1200 mm︱travel -z axis 1000 mm︱table length 3000 mm︱table width 1000 mm︱table load 7 t︱T-slots 7 ︱T-slot - distance 22 mm︱number of spindle speeds ca. 3000 U/min︱feeds 2 - 5000 mm/min︱rapid traverse X 8000 / Y-Z 1000 mm/min︱engine output 36 kW︱weight of the machine ca. 18 t︱dimensions of the machine ca. m︱Control HEIDENHAIN TNC 426 PB ︱

---