Milling machines

travel -x axis 3.000 mm︱travel -y axis 1.600 mm︱travel -z axis 1.300 mm︱control Heidenhain TNC 430 ︱turning speed range 6.000 U/min︱Number of axles 6 St.︱numbers of positions in the tool changer 66 ︱tool taper SK 50 ︱surface area 2.000 x 1.600 mm︱table load 12.000 kg︱

---

Bed Type Milling Machine - Universal | SHW - UFZ 5 S equipped with two chip conveyor and a round table Equipment/accessories: - Rückle round table: type PKTF 55, - Universal milling head UFK milling head holder, 360x1 degree swiveling, - Milling head can be swiveled 180x1 degrees - 4-sided work area paneling with electrical. tumbler - Reinforced coolant system 25 l/min at 25 bar; 500 liters container - 2x chip conveyor ejection height 1250mm - Radio measuring probe - 1 set of fixators - electronic handwheel Further information: - July 2019 Exchange spindle installed - February 2019 Y-axis drive motor replaced - February 2022 new main spindle motor installed - February 2022 Cooling unit overhauled The machine is in very good condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 S

travel -x axis 760 mm︱travel -y axis 510 mm︱travel -z axis 610 mm︱control for program Ultimax 4 ︱turning speeds 10.000 U/min︱numbers of positions in the tool changer 24 ︱tool taper SK40 ︱table-size 1.020 x 510 mm︱

---

Milling Machine - Vertical | HUROC - VMX 30 equipped with ITC. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMX30 | VMX-30

travel -x axis 705 mm︱travel -y axis 425 mm︱travel -z axis 610 mm︱control Heidenhain - iTNC 530 ︱turning speed range 50 - 20.000 U/min︱numbers of positions in the tool changer 32 ︱tool taper SK30 ︱

---

Universal Milling Machine | FEHLMANN - Picomax 90-M Scope of delivery: - extensive package of tools - swivel rotary table (4th + 5th axis) The machine is in a well-maintained condition. Please refer to the offer for further technical details. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M

travel -x axis 6.000 mm︱travel -y axis 1.000 mm︱travel -z axis 800 mm︱control Heidenhain - iTNC530 ︱distance vertical spindle / table 1.000 mm︱table-size 3.300 x 1.050 mm︱number of T-slots 7 ︱T-slot - width 125 ︱

---

Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000

travel -x axis 760 mm︱travel -y axis 640 mm︱travel -z axis 760 mm︱surface area 500 x 500 mm︱control FANUC Oi-MD ︱numbers of positions in the tool changer 60 ︱

---

Milling machining centers - horizontal | QUASER - HX504 AE The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HX504AE | HX 504 AE | HX-504 AE | HX 504AE

travel -x axis 1.400 mm︱travel -y axis 1.200 mm︱travel -z axis 1.350 mm︱control FANUC - MSX-701III ︱numbers of positions in the tool changer 60 ︱tool taper HSK 100 ︱max. Spindle speed 8.000 U/min.︱max. tool length 800 mm︱max. tool weight 30 kg︱

---

Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG equipped with additional 4th axis. Equipment: - B-axis (rotary table): 360,000 X 0.0001, - 2-fold pallet changing system, - Pallet dimensions 800 mm x 800 mm, The machine is in a well-maintained condition with approx. 30.000 (h) Power-On hours. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000

travel -x axis 1.050 mm︱travel -y axis 875 mm︱travel -z axis 875 mm︱control FANUC 18i-M ︱NC rotary table 630 x 630 ︱numbers of positions in the tool changer 60 ︱Dimensions (L x W x H) 3.525 x 5.650 x 3.526 mm︱weight of the machine 20.000 kg︱

---

Milling machining centers - horizontal | HYUNDAI KIA - HS630 equipped with ITC (30bar), chip conveyor & RENISHAW tool changer. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYUNDAI WIA - HS630 | HS 630 | HS-630

number of spindle speeds 6.000 U/min︱tool taper BT50 ︱numbers of positions in the tool changer 121 ︱control FANUC31iMA ︱

---

Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

travel -x axis 1.000 mm︱travel -y axis 850 mm︱travel -z axis 750 mm︱spindle turning speed range 35 - 6.000 U/min︱numbers of positions in the tool changer 60 ︱table dimension - longitudinal 630 x 630 mm︱control FANUC16i ︱

---

Milling machining centers - horizontal | TOYODA - FH63S equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630 | FH63 | FH-63 | FH 63

x-travel 900 mm︱y-travel 770 mm︱z-travel 1000 mm︱Control Siemens 840 D ︱tool taper SK 50 ︱spindle turning speed range 20 - 6000 U/min︱rapid travel x/y/z 60 m/min︱Motor power (60% ED) 30 kW︱max. torque on the spindle (60% ED) 1080 Nm︱pallet size: 630 x 500 mm︱weight of the machine ca. 21,0 t︱dimensions of the machine ca. m︱

---

- CNC-control SIEMENS 840 D - portable handwheel - 2-station pallet changer - autom. horizontal-vertical milling head - 60-station ATC - coolant equipment with paper band filter - coolant thru spindle 80 bar - oil cooler - NC-rotary table 360 deg, type DA 500 EV - Chip conveyor Interference circle diameter 1150 mm

x-travel 4000 mm︱y-travel 1500 mm︱z-travel 3500 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Machine was producing parts of airplane Motors for Rolls Royce. Machine very little used and as new. Machine with 2 pallet tables, diamter 1500 mm 2 x ATC 40 tool changer Automatic milling head 1ºx1º indexing, 37 kW Max. spindle speed 5000 rpm coolant equipment with paper band filter coolant through spindle min./max. 20-60 bar

travel -x axis 1.100 mm︱travel -y axis 610 mm︱travel -z axis 610 mm︱table dimension (L x W) 1.250 x 610 mm︱tool adaptor SK40 ︱numbers of positions in the tool changer 30 ︱table diameter 250 mm︱

---

Milling machining centers - vertical | MTcut - V 110 T with NC swivel rotary table (TT251HEE08) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110

travel -x axis 2x 750 mm︱travel -y axis 500 mm︱travel -z axis 600 mm︱control Siemens 840 D ︱turning speeds 30 - 6.000 U/min︱tool taper SK 40 ︱numbers of positions in the tool changer 22 ︱surface area 2x (1.000 x 500) mm︱Dimensions (L x W x H) 4.100 x 2.300 x 2.600 mm︱

---

Double-place machining center (shuttle operation) | AXA - DBZ Additional equipment: The machine comes with a 4th axis on each side processing in tack setting. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:

travel -x axis 762 mm︱travel -y axis 305 mm︱travel -z axis 406 mm︱control Haas ︱

---

Milling machining centers - vertical | Haas - TM-1 HF The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TM1 HF | TM-1HF | TM1HF | TM-1-HF

x-travel 3000 mm︱y-travel 4000 mm︱z-travel 1500 mm︱Control Heidenhain TNC 430 M ︱total power requirement 120 kVA︱weight of the machine ca. 83,2 t︱dimensions of the machine ca. m︱

---

3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the seller's plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working range Travels X-axis 3000 mm Y-axis 4000 mm Z-axis 1500 mm Max. column passage 2700 mm Max. Distance between work table and spindle nose: Lower edge of ram interface min./max. 660 mm / 2160 mm Workpiece table Length 3000 mm Width 2000 mm Load 4 t/m² T-slots 28 H8 Rapid traverse X-axis 15000 mm/min Y-axis 15000 mm/min Z-axis 15000 mm/min Equipment: CNC control Heidenhain TNC 430 M Milling heads: Straight milling head type FK 120/450 Outside diameter 280 mm Tool holder SK 50 power max. 67 kW max. speed 5000 rpm Coolant supply through the spindle, via adjustable nozzles 1-axis fork-type milling head type FK 100/2D tool holder SK50 power max. 67 kW max. speed 4000 rpm swiveling range A/B axis +105°/-95° Coolant supply via adjustable nozzles Coolant tank 1.000 l Chip conveyor system Change head station Weight specifications: 1 Y-slide 7000 kg 2 ram 10000 kg 3 column 1 8000 kg 4 column 2 8000 kg 5 crossrail 28000 kg 6 Bed/table 20000 kg 7 Hydraulic power unit 1000 kg 8 Cooling unit 1200 kg 9 Coolant tank ??? Total 83200 kg

travel -x axis 7.200 mm︱travel -y axis 4.200 mm︱travel -z axis 1.750 mm︱Control 840D sl ︱daylight 2300 mm︱distance between columns 3500 mm︱size of pallet 5000 x 3000 mm︱table load 65 t︱milling drive 50 kW︱spindle taper ISO 60 ︱c-axis 7500 Nm︱spindle diameter 150 mm︱turning speed range - milling 10 - 4000 U/min︱feed - rapid adjustment 10 - 15000 mm/min︱b-axis +/- 90 °︱total power requirement 92 kW︱weight of the machine ca. 380 t︱

---

Planer-Type Milling M/C - Double Column | WALDRICH COBURG - 15S - 10 FPF 300 NC - heavy-duty double-column milling machine (molds and dies) - 2 pallet stations with 2 pallets (load 65to each) - 2009 retrofit to SIEMENS 840Dsl (including complete electric wiring and new switch cabinet) - in 2011 change of all servo drives - 50kW NC universal milling head (2.5deg Hirth)(WALDRICH USP300C450F15S) - 40kW NC-forkhead (2-axis)(WALDRICH UFN00SZ500) - various (angular) milling heads - NC tool changer (76 tools ISO50 and ISO60) - chip conveyor The machine is in very good condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 15 S | 15-S | WACO

x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱Control Siemens 840 D ︱column daylight 2650 mm︱distance spindle nose and table 2500 mm︱table surface area 6400 x 2250 mm︱table load 50 t︱tool taper ISO 60 ︱spindle turning speed range 5 - 2000 U/min︱table feed 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed (W) 10 - 2000 mm/min︱spindle motor 55 kW︱total power requirement 85 kW︱weight of the machine ca. 125 t︱dimensions of the machine ca. 18 x 9,5 x 6,5 m︱

---

Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90 deg. indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device Machine can be inspected under power, subject to prior notice.

x-travel 290 mm︱y-travel 150 mm︱z-travel 330 mm︱table surface area 210 x 600 mm︱tool taper SK 40 ︱total power requirement 9,5 kVA︱weight of the machine ca. 730 kg︱dimensions of the machine ca. 2000 x 2200 x 1655 mm︱

---

The machine is in very good condition and comes from a a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout from Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

x-travel 290 mm︱y-travel 150 mm︱z-travel 330 mm︱table surface area 210 x 600 mm︱tool taper SK 40 ︱total power requirement 9,5 kVA︱weight of the machine ca. 730 kg︱dimensions of the machine ca. 2000 x 2200 x 1655 m︱

---

The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

- - - - - travels - - - - - - - - - - -︱travel -x axis 10.000 mm︱travel -y axis 1.500 mm︱travel -z axis 4.000 mm︱- - - spindle - - - - - - - - -︱output 62.5 kW︱turning speed range 262 - 4.000 U/min︱Torque 2.280 Nm︱- - - table - - - - - - - - -︱Size of table plate 2x (2.500 x 3.000) mm︱longitudinal travel 2.000 mm︱max. load 30.000 kg︱solution 0,0005 °︱solution 1,8 sek.︱table turning speeds 1,5 U/min︱- - - further technical details - - - - - - ︱control Siemens 840 Dsl ︱numbers of positions in the tool changer 80 ︱tool taper ISO 50 ︱max. feed 25.000 mm/min︱

---

Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"

x-travel 16000 mm︱y-travel 1250 mm︱z-travel 3200 mm︱Control Heidenhain iTNC 530 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

The machine was extensively overhauled in 2009. With a new CNC Control make Heidenhain iTNC 530. Guides in the X-axis completely renewed, engines, drives and valves also renewed. An inspection under power in the factory is possible. CNC control Heidenhain iTNC 530i Travels: X axis 16000mm Y axis 1250mm Z axis 3200mm Milling spindle speeds 2000 rpm Swivel-type angle head: 2.5 deg Drive power: 37 KW Note: The machine will be sold without floor plates, tables and chip conveyor.