Gear Deburring Machine

crown gear diamter max. 600 mm︱pinion diameter - max. 254 mm︱crown gear turning speeds max. 3.100 U/min︱pinion turning speeds max. 3.100 U/min︱control GE FANUC Series 160i-M ︱pinion cone range 165-345 mm︱crown gear cone range 89 - 267 mm︱lapping torque 2 - 24 Nm︱total power requirement 36 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 1,80 x 2,40 x 1,90 m︱

---

Own lapping system! Was also operated at a lapping center

max. wheel diameter 540 mm︱turning speeds 315 - 1260 U/min︱axis adjustment +/- 50 mm︱ratio 1 : 1 bis 1 : 10 ︱taper MK ︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 1,7 x 2,1 x 1,5 m︱

---

crown gear diamter max. 500 mm︱distance crown gear spindle - front pinion spindle 150 - 350 mm︱distance pinion spindle - front crown gear spindle 120 - 340 mm︱control GE FANUC Series 160i-M ︱ 70 mm︱pinion turning speeds max. 0 - 3.000 mm︱crown gear turning speeds max. 0 - 2.600 U/min︱inner taper pinion spindle Ø 99,2 mm︱inner tape crown gear spindle Ø 99,2 mm︱rated current 30 A︱weight of the machine ca. 6,40 t︱dimensions of the machine ca. 2,40 x 2,20 x 2,10 m︱

---

Own lapping system! Was also operated at a lapping center

max. wheel diameter 400 mm︱gear width NA mm︱max. module 1 ︱min. module 10 ︱total power requirement 12 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. m︱

---

K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total electrical load 12 kW - 380 V - 50 Hz Weight 4,200 kg Accessories / Special Features * Hydraulic workpiece clamping for both spindles. * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc. * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism. * Separate switch cabinet. * Separate hydraulic unit, etc. Price, ex stock EUR 29,500.-- The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.

max. wheel diameter 1300 / 1100 mm︱gear width M12 - 600 mm︱max. module 22 ︱min. module 2 ︱total power requirement kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 3,2 x 3,2 x m︱

---

6-axis industrial robot YASKAWA MH50 2 CNC rotary tables 1. rotary table 1 and rotary table 2 limited Nmax=1.300 1/min Reduction ratio I= 1:72 Nmax: Reduction ratio and Nmax motor corresponds to 120°/sec on the table Mdnenn. Output = 828 Nm Maximum centric loading weight = 15 kN Centering force from inside to outside clamping = 7,540 N @ 6 bar Centering accuracy in the gripper = 0.05 mm [PA] Rotary field restriction depending on cable and hose situation Provided for ± 720° (provide for this in the robot controller) Motor: YASKAWA SGMRV-20ANA-YR11 Milling spindle: AMTRU (CH), type Flexicut 250 Gearbox: ZAE Hamburg, type: S100B-1300/65-HOX-72.0:1-3000 Version: with Yaskawa servo axis + ZAE worm servo gearbox

max. wheel diameter 40 - 160 mm︱gear width 90 mm︱Control SIEMENS SINUMERIC 840D ︱

---

Gear shaving - / deburring machine ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

max. wheel diameter 40 - 160 mm︱gear width 90 mm︱control Siemens Sinumeric ︱voltage 400 V︱frequency 50 Hz︱connected load 34 kVA︱loading 800 Euro ︱

---

max. wheel diameter 40 - 160 mm︱gear width 90 mm︱Control SIEMENS SINUMERIC 840D ︱

---

Gear shaving - / deburring machine ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

max. wheel diameter 2000 mm︱gear width 0 mm︱max. module 0 ︱Weight ca 700 kg︱dimensions of the machine ca. 2x1,2x1,5 m︱

---

uncomplete machine body with drive motor. drive unit fully functional. Without grinding unit.