.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Wide Band Grinding Machine

          Machinelist: Wide Band Grinding Machine


          Internal Grinding Machine

          used Grinding machines Internal Grinding Machine STUDER S140


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10045 · Internal Grinding Machine

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          internal diameter 100 mm︱grinding depth 100 mm︱swing diameter 120 mm︱x-axis 300 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱dimensions of the machine ca. 3,8 x 2,6 x 2,2 m︱
          two 120mm grinding spindels installed 90.000 rpm and 45.000 rpm DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed
            internal diameter 100 mm
            grinding depth 100 mm
            swing diameter 120 mm
            x-axis 300 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            dimensions of the machine ca. 3,8 x 2,6 x 2,2 m
            Description :
            two 120mm grinding spindels installed 90.000 rpm and 45.000 rpm
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Internal Grinding Machine TRIPET TST 200 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-349912 · Internal Grinding Machine

          TRIPET - TST 200 CNC - - 1986 -

          Technical details
          internal diameter 120 mm︱grinding depth 200 mm︱swing diameter mm︱total power requirement 4 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features * TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with the usual programs such as pendular grinding, double pendular grinding, blind hole grinding (with face grinding), plunge-cut grinding, and automatic compensation of the dressing amount. Feed movements via stepping motor and roller-thread spindles (with hydraulic linear amplifier in the Z Axis). * Separate REFU Converter for the mounted PRECISE High Frequency Grinding Spindle, Model SC 40-0, n = 60,000 - 120,000 rpm. (One extra spindle is available.) * Workpiece headstock with hydraulic workpiece clamping device. (Also mounted at present is a special clamping device for long parts, which can be hydraulically clamped between the workpiece headstock and the live driving collar.) * Motor-driven dressing device. * Coolant preparation with centrifuge. * Integrated switch cabinet. * Internal hydraulic aggregate. * Separate cooling aggregate for hydraulic oil. * Oil mist exhaust. * Compressed air processing. * Completely enclosed working area. Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of grinding machines available. Please let us know your requirements.
            internal diameter 120 mm
            grinding depth 200 mm
            total power requirement 4 kW
            Description :
            Grinding diameter, internal, max., approx. 3 - 120 mm
            Grinding depth, approx. 200 mm

            Height of centres above rotating workpiece slide 132 mm
            Max. swing Ø in front of rotating workpiece slide, approx. 450 mm
            Work spindle admission 40 mm

            Table stroke, max. (Z axis) 480 mm
            Workpiece cross adjustment (X axis) 50 mm
            Turret head cross adjustment (U axis) 50 mm

            Workspindle head swivelling (B axis) -30 / +45 ° (manual)

            Speeds of workspindle, infinitely variable 75 - 1,300 rpm
            Grinding spindle speeds 9,500 - 150,000 rpm

            Grinding spindle drive 4 kW
            Total electrical load, approx. 8 kW - 380 V - 50 Hz
            Weight, approx. 3,000 kg

            Accessories / Special Features
            * TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with the usual programs such as pendular grinding, double pendular grinding, blind hole grinding (with face grinding), plunge-cut grinding, and automatic compensation of the dressing amount. Feed movements via stepping motor and roller-thread spindles (with hydraulic linear amplifier in the Z Axis).
            * Separate REFU Converter for the mounted PRECISE High Frequency Grinding Spindle, Model SC 40-0, n = 60,000 - 120,000 rpm. (One extra spindle is available.)
            * Workpiece headstock with hydraulic workpiece clamping device. (Also mounted at present is a special clamping device for long parts, which can be hydraulically clamped between the workpiece headstock and the live driving collar.)
            * Motor-driven dressing device. * Coolant preparation with centrifuge.
            * Integrated switch cabinet. * Internal hydraulic aggregate. * Separate cooling aggregate for hydraulic oil.
            * Oil mist exhaust. * Compressed air processing.
            * Completely enclosed working area.


            Condition : Very good. Machine can soon be inspected under power.
            Delivery : Ex stock - as inspected under power.
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of grinding machines available. Please let us know your requirements.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Internal Grinding Machine VOUMARD 200 CNC (ZX)


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-355734 · Internal Grinding Machine

          VOUMARD - 200 CNC (ZX) - - 1986 -

          Technical details
          internal diameter 120 mm︱grinding depth 200 mm︱swing diameter mm︱total power requirement kW︱weight of the machine ca. t︱
          CNC Internal Grinder w.2 Station Turret, Chuck
            internal diameter 120 mm
            grinding depth 200 mm
            Description :
            CNC Internal Grinder w.2 Station Turret, Chuck


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Internal Grinding Machine MORARA Micro I


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-1867 · Internal Grinding Machine

          MORARA - Micro I - - 1986 -

          Technical details
          internal diameter 2 - 40 mm︱grinding depth 70 mm︱swing diameter 285 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. m︱
          Machine in good working condition, with new e-motor for the working spindle drive. Machine video: https://youtu.be/N95AzX9D_QY Max. Distance chuck flange - wheelhead 390 mm Accessories: Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW Magazine Machine documentation.
            internal diameter 2 - 40 mm
            grinding depth 70 mm
            swing diameter 285 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1,5 t
            Description :
            Machine in good working condition, with new e-motor for the working spindle
            drive.
            Machine video:
            https://youtu.be/N95AzX9D_QY

            Max. Distance chuck flange - wheelhead 390 mm

            Accessories:
            Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW
            Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW
            Magazine
            Machine documentation.


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Internal Grinding Machine VOUMARD 404 N2 X2 / 700


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-10000 · Internal Grinding Machine

          VOUMARD - 404 N2 X2 / 700 - - 1978 -

          Technical details
          internal diameter 300 mm︱grinding depth 700 mm︱swing diameter 330 mm︱spindle turning speed range 3600-40000 U/min︱spindle passage 50 mm︱workpiece turning speeds 180, 300, 500, 850 U/min︱total power requirement / kW︱weight of the machine ca. / t︱dimensions of the machine ca. / m︱
            internal diameter 300 mm
            grinding depth 700 mm
            swing diameter 330 mm
            spindle turning speed range 3600-40000 U/min
            spindle passage 50 mm
            workpiece turning speeds 180, 300, 500, 850 U/min
            total power requirement / kW
            weight of the machine ca. / t
            dimensions of the machine ca. / m


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Grinding machines Internal Grinding Machine JUNG


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6504 · Internal Grinding Machine

          JUNG - - - 1970 -

          Technical details
          internal diameter 200 mm︱grinding depth 250 mm︱swing diameter 330 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            internal diameter 200 mm
            grinding depth 250 mm
            swing diameter 330 mm


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Internal Grinding Machine WMW-GLAUCHAU SIP 200x315


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06555 · Internal Grinding Machine

          WMW-GLAUCHAU - SIP 200x315 - - 1970 -

          Technical details
          documentation ︱coolant ︱internal diameter mm︱serial number 34253 ︱weight of the machine ca. 5,8 t︱
            serial number 34253
            weight of the machine ca. 5,8 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Internal Grinding Machine WOTAN RJ 133/5 K


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-032050 · Internal Grinding Machine

          WOTAN - RJ 133/5 K - - 1965 -

          Technical details
          internal diameter 20/300 mm︱grinding depth 250 mm︱swing diameter 250 mm︱workpiece spindle - bore 45 mm︱workpiece spindle swivable +/- 25 °︱taper setting angle of the workpiece column 50 °︱work piece spindle speed 42 - 400 U/min︱grinding spindle speed 10.000 U/min︱table speed -stepless- 0,1 - 8 m/min︱grinding spindle drive 4 kW︱power capacity 10 kW︱weight of the machine ca. 4.500 kg︱dimensions of the machine ca. m︱
          Internal grinding Æ, min./max. 20 / 300 mm Grinding depth 500 mm Table stroke, min./max. 5 / 800 mm Height of centres above table 250 mm Swing Æ in the table recess 600 mm Workspindle bore 62 / 45 mm Swivability of workpiece wheelhead 25 ° Max. taper angle which can be ground 50 ° Infeed, per stroke 0.0025 - 0.5 mm Workspindle speeds 20 - 400 rpm Grinding spindle speeds 10,000 rpm Table speeds, steplessly adjustable 0.1 - 8 m/min Grinding spindle drive 4 kW Total electical load approx. 8.3 kW - 380 V - 50 Hz Weight approx. 4,500 kg Accessories / Special Features * Manually swivable face grinding equipment with cup wheel, approx. Æ 150 mm, and built-on dressing device. Longitudinal travel approx. 350 mm. * FORTUNA Internal Grinding Spindle, Model SI 80 x 630, n = 10,000 rpm. * Hydraulically swivable diamond dressing device for the internal grinding spindle. * Separate coolant equipment.
            internal diameter 20/300 mm
            grinding depth 250 mm
            swing diameter 250 mm
            workpiece spindle - bore 45 mm
            workpiece spindle swivable +/- 25 °
            taper setting angle of the workp. 50 °
            work piece spindle speed 42 - 400 U/min
            grinding spindle speed 10.000 U/min
            table speed -stepless- 0,1 - 8 m/min
            grinding spindle drive 4 kW
            power capacity 10 kW
            weight of the machine ca. 4.500 kg
            Description :

            Internal grinding Æ, min./max. 20 / 300 mm
            Grinding depth 500 mm
            Table stroke, min./max. 5 / 800 mm

            Height of centres above table 250 mm
            Swing Æ in the table recess 600 mm

            Workspindle bore 62 / 45 mm
            Swivability of workpiece wheelhead 25 °
            Max. taper angle which can be ground 50 °
            Infeed, per stroke 0.0025 - 0.5 mm

            Workspindle speeds 20 - 400 rpm
            Grinding spindle speeds 10,000 rpm

            Table speeds, steplessly adjustable 0.1 - 8 m/min

            Grinding spindle drive 4 kW
            Total electical load approx. 8.3 kW - 380 V - 50 Hz
            Weight approx. 4,500 kg

            Accessories / Special Features
            * Manually swivable face grinding equipment with cup wheel,
            approx. Æ 150 mm, and built-on dressing device. Longitudinal
            travel approx. 350 mm.
            * FORTUNA Internal Grinding Spindle, Model SI 80 x 630,
            n = 10,000 rpm.
            * Hydraulically swivable diamond dressing device for the internal
            grinding spindle.
            * Separate coolant equipment.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Internal Grinding Machine UNIQUE S15000


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-41 · Internal Grinding Machine

          UNIQUE - S15000 - - -

          Technical details
          ︱grinding depth 1800 mm︱ ︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Spindle Speed Min: 9.000 Rpm Max: 15.000 Rpm Centre height Min: 230 mm Max: 510 mm Spindle stroke 210 mm Horiz. Table size 700 x 1.000 mm Table stroke 1.800 mm Featured with - Feed on table - Feed on hor. Movement - Cooling unit - Safety doors
            grinding depth 1800 mm
            Description :

            Spindle Speed Min: 9.000 Rpm
            Max: 15.000 Rpm
            Centre height Min: 230 mm
            Max: 510 mm
            Spindle stroke 210 mm Horiz.
            Table size 700 x 1.000 mm
            Table stroke 1.800 mm
            Featured with
            - Feed on table
            - Feed on hor. Movement
            - Cooling unit
            - Safety doors


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact

          Wide Band Grinding Machine

          used Grinding machines Wide Band Grinding Machine ERNST ATLAS ER 1500


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9238993 · Wide Band Grinding Machine

          ERNST - ATLAS ER 1500 - - 2015 - NC Touch

          Technical details
          work piece width 1500 mm︱plate thickness 0,8 - 100 mm︱Brush width 490 mm︱Brush diameter 200 mm︱immersion travel ca. 1.5 - 2.0 mm︱grinding speed 200 - 1200 U/min︱band speed 0,8 - 4.0 m/min︱work height max. 950 mm︱Required air-pressure 5.0 bar︱Air consumption ca. 2.200 L/min︱number of brushing / polishing units 8 Stück︱Control NC Touch ︱voltage 400 V︱total power requirement ca. 40.0 kW︱weight of the machine ca. 6.100 kg.︱dimensions of the machine ca. 3700 x 2750 x 2080 mm︱
          ** Well maintained condition with lots of accessories ** New price including accessories approx. 180.000 euros ** Special price on request Furnishing : - ERNST dry wide belt sanding machine “TYP ATLAS ER ROTOR” * Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen * Control of the entire system * graphically supported color terminal * Adjustment of the immersion depth of the grinding brushes - Coordinate switch for: * continuous feed speed from the conveyor belt * Continuous adjustment of the material thickness - Material conveyor belt with a vacuum track * Perforation with conical countersinks for better adhesion of the workpieces * minimum workpiece size length 80.0 mm / area 200 cm² - Rotor head for even and strong edge rounding * for flat and profiled workpieces * for foiled and galvanized workpieces * removes sharp edges from punching and laser burrs * Rotation around the rotor axis * 8x counter-rotating brush rollers with sanding lamellas - complete machine documentation machine + accessories Special accessories included: - ERNST electro-motive material supply and discharge conveyor belt - WESCO VARIO CELL type 4.16 extraction system including pipe connections * 7.5 kW fan GCM-4540 incl. pre-separator - lots of new replacement grinding brushes * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238993
            work piece width 1500 mm
            plate thickness 0,8 - 100 mm
            Brush width 490 mm
            Brush diameter 200 mm
            immersion travel ca. 1.5 - 2.0 mm
            grinding speed 200 - 1200 U/min
            band speed 0,8 - 4.0 m/min
            work height max. 950 mm
            Required air-pressure 5.0 bar
            Air consumption ca. 2.200 L/min
            number of brushing / polishing u. 8 Stück
            Control NC Touch
            voltage 400 V
            total power requirement ca. 40.0 kW
            weight of the machine ca. 6.100 kg.
            dimensions of the machine ca. 3700 x 2750 x 2080 mm
            Description :
            ** Well maintained condition with lots of accessories
            ** New price including accessories approx. 180.000 euros
            ** Special price on request

            Furnishing :
            - ERNST dry wide belt sanding machine “TYP ATLAS ER ROTOR”
            * Area of application:
            - Slag removal / deburring / edge rounding / finish grinding etc.
            - ERNST NC control including touch screen
            * Control of the entire system
            * graphically supported color terminal
            * Adjustment of the immersion depth of the grinding brushes
            - Coordinate switch for:
            * continuous feed speed from the conveyor belt
            * Continuous adjustment of the material thickness
            - Material conveyor belt with a vacuum track
            * Perforation with conical countersinks for better adhesion of the workpieces
            * minimum workpiece size length 80.0 mm / area 200 cm²
            - Rotor head for even and strong edge rounding
            * for flat and profiled workpieces
            * for foiled and galvanized workpieces
            * removes sharp edges from punching and laser burrs
            * Rotation around the rotor axis
            * 8x counter-rotating brush rollers with sanding lamellas
            - complete machine documentation machine + accessories

            Special accessories included:
            - ERNST electro-motive material supply and discharge conveyor belt
            - WESCO VARIO CELL type 4.16 extraction system including pipe connections
            * 7.5 kW fan GCM-4540 incl. pre-separator
            - lots of new replacement grinding brushes

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238993


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Wide Band Grinding Machine Lissmac SMW 545


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3176 · Wide Band Grinding Machine

          Lissmac - SMW 545 - - 2014 -

          Technical details
          Working hours machine 2100 h︱
            Working hours machine 2100 h


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Wide Band Grinding Machine BUETFERING PRIMA 4KKTT 13W


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9238992 · Wide Band Grinding Machine

          BUETFERING - PRIMA 4KKTT 13W - - 2001 -

          Technical details
          work piece width 1350 mm︱grinding band dimension 1370 x 1900 mm︱band speed 18.0 / 4.5 / 9.0 m/sek︱workpiece height 0.5 - 120 mm︱work height max. 950 mm︱Required air-pressure 6,0 - 8,0 bar︱Air consumption 2.000 L/min.︱work height max. 950 mm︱voltage 400 V︱total power requirement 37,0 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. 3510 x 2750 x 2080 mm︱
          Furnishing : - BUETFERING SteelMaster "PRIMA 4KKTT 13W" wet grinding deburring machine * intended for deburring plate-shaped workpieces made of metal (sheet metal) - including 4x units (2x type K / 2x type T) - Station 1+2 = grinding belt = distance primary burr * Endless sanding belt is pneum between tension roller + contact roller. tense * electric motor drive * Connection to the machine is via V-belts * Contact roller diameter.. 200 mm * Sanding belt speed .. 18 m/sec. + 4.5/9.0 m/sec. * Drive power: 11.0 kW + 3.7/7.5 KW - Station 3+4 = disc brush + round brush = removal of secondary burr * consist of wire-equipped and height-adjustable roller/disc brushes * electric motor drive * Connection to the machine is via V-belts * Aggregate 3 = disc brushes .. not 100% equipped * Drive power: 7.5 kW + 7.5 kW - Low tool costs - Use in wet or dry processes - ideal for format sheets - no water stains as the workpiece dries - continuous speed adjustment of the conveyor belt - Ammeter for each station (drive or unit load) - complete machine documentation * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238992
            work piece width 1350 mm
            grinding band dimension 1370 x 1900 mm
            band speed 18.0 / 4.5 / 9.0 m/sek
            workpiece height 0.5 - 120 mm
            work height max. 950 mm
            Required air-pressure 6,0 - 8,0 bar
            Air consumption 2.000 L/min.
            work height max. 950 mm
            voltage 400 V
            total power requirement 37,0 kW
            weight of the machine ca. 5500 kg
            dimensions of the machine ca. 3510 x 2750 x 2080 mm
            Description :
            Furnishing :
            - BUETFERING SteelMaster "PRIMA 4KKTT 13W" wet grinding deburring machine
            * intended for deburring plate-shaped workpieces made of metal (sheet metal)
            - including 4x units (2x type K / 2x type T)
            - Station 1+2 = grinding belt = distance primary burr
            * Endless sanding belt is pneum between tension roller + contact roller. tense
            * electric motor drive
            * Connection to the machine is via V-belts
            * Contact roller diameter.. 200 mm
            * Sanding belt speed .. 18 m/sec. + 4.5/9.0 m/sec.
            * Drive power: 11.0 kW + 3.7/7.5 KW
            - Station 3+4 = disc brush + round brush = removal of secondary burr
            * consist of wire-equipped and height-adjustable roller/disc brushes
            * electric motor drive
            * Connection to the machine is via V-belts
            * Aggregate 3 = disc brushes .. not 100% equipped
            * Drive power: 7.5 kW + 7.5 kW
            - Low tool costs
            - Use in wet or dry processes
            - ideal for format sheets - no water stains as the workpiece dries
            - continuous speed adjustment of the conveyor belt
            - Ammeter for each station (drive or unit load)
            - complete machine documentation

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238992


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          LISSMAC - ERNST - BUETFERING -