.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Band Saw - Automatic - Horizontal

          Machinelist: Band Saw - Automatic - Horizontal


          Band Saw - Automatic - Horizontal

          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID SBS 550 VA-I / CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66275 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - SBS 550 VA-I / CNC - - -neu- -

          Technical details
          550 mm︱ 550 mm︱ 550 x 550 mm︱saw band length 5980 x 41 x 1,3 mm︱table height 800 mm︱band speed 20 - 100 m/min︱total power requirement 5,5 kW︱weight of the machine ca. 3,8 t︱dimensions 3,0 x 2,15 x 2,2 m︱
          PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.
            550 mm
            550 mm
            550 x 550 mm
            saw band length 5980 x 41 x 1,3 mm
            table height 800 mm
            band speed 20 - 100 m/min
            total power requirement 5,5 kW
            weight of the machine ca. 3,8 t
            dimensions 3,0 x 2,15 x 2,2 m
            Description :
            PROMOTIONAL PRICE!!!!
            2-column high-performance automatic band saws from the SBS series
            The SBS series impresses with its sophisticated technology, high quality and
            longevity
            and unrivaled, sophisticated standard equipment.
            • Modern SNC 20 control for CNC version
            • Frequency-controlled saw drive
            • Control buttons with pictograms
            • Work light
            • Powered chip brush
            • Hydraulic belt tension
            • Clamping pressure regulation
            • Double vice (before and after the belt)
            • Creep path for positioning
            • Bundle tension prepared electrically and hydraulically
            • Chip conveyor
            The SNC 20 control allows you to enter up to 20 different sawing tasks (length
            and number of pieces) conveniently and easily. When the target dimension is
            entered, the control automatically calculates the saw waste and the number of
            feeds. Additionally, the error code display system provides quick analysis for
            troubleshooting.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP - VOLLAUTOMAT SHARK 331-1 SPIDER 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66309 · Band Saw - Automatic - Horizontal

          MEP - VOLLAUTOMAT - SHARK 331-1 SPIDER 5.0 - - -Neu- - NC

          Technical details
          cutting diameter 280 mm︱saw band length 3320 x 27 x 0,9 mm mm︱cutting width 330 mm︱Control NC ︱capacity 90 degrees: flat 330x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱band speed 15 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,24 t︱dimensions of the machine ca. 3,3 x 2,83 x 2,23 m︱
          Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep
            cutting diameter 280 mm
            saw band length 3320 x 27 x 0,9 mm mm
            cutting width 330 mm
            Control NC
            capacity 90 degrees: flat 330x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            band speed 15 - 100 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1,24 t
            dimensions of the machine ca. 3,3 x 2,83 x 2,23 m
            Description :
            Attention: special price!!!
            •Fully automatic hydraulic band saw
            •Miter cuts up to 60° left possible
            •Saw band length: 3650x27x0.9
            •Single stroke: 600 mm (programmable up to 10m)
            •Simple touchscreen operation.
            •Saw arm made of nodular cast iron - robust and stable
            •Required space 3.4 m²
            •Footprint 1900mm wide x 1800mm deep


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP SHARK 230-1 NC HS 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66306 · Band Saw - Automatic - Horizontal

          MEP - SHARK 230-1 NC HS 5.0 - - -neu- -

          Technical details
          230 mm︱ 230 x 230 mm︱saw band length 2950 x 27 x 0,9 mm︱table height mm︱band speed 15 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,2 t︱dimensions m︱
          SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based Controls.SOME FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band
            230 mm
            230 x 230 mm
            saw band length 2950 x 27 x 0,9 mm
            band speed 15 - 100 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1,2 t
            Description :
            SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw
            with
            semi-automatic function for 0° cuts of mild steel, stainless steel,
            Steel alloys, solid and profile material, with a maximum remaining piece length
            of 60 mm.
            - The cross section is max. 230x230 mm.
            - Numerically controlled band saw machines with the new, specially designed by
            MEP developed for Automatic Windows “CE” based
            Controls.SOME FEATURES:
            - User interface with 7” touch screen display and mechanical buttons
            for the operating functions of the sawing machine, guaranteed reliable
            Operation, simple and intuitive, and real-time control of all
            Cutting parameters.
            - Safety enclosure in accordance with the latest safety regulations
            Machinery Directive EN 13898/2007.
            - New fieldbus communication system with double microprocessor
            Serial connection.
            - Robust cast iron structure (G25) to compensate for vibrations
            Improve machine stability and protect the saw band


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP SHARK 350 NC HS 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66307 · Band Saw - Automatic - Horizontal

          MEP - SHARK 350 NC HS 5.0 - - -neu- -

          Technical details
          355 mm︱ 350 x 350 mm︱saw band length 4640 x 34 x 1,1 mm︱table height mm︱band speed 15 - 115 m/min︱total power requirement 4,0 kW︱weight of the machine ca. 2,8 t︱dimensions 3,1 x 2,2 x 2,2 m︱
          Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters
            355 mm
            350 x 350 mm
            saw band length 4640 x 34 x 1,1 mm
            band speed 15 - 115 m/min
            total power requirement 4,0 kW
            weight of the machine ca. 2,8 t
            dimensions 3,1 x 2,2 x 2,2 m
            Description :
            Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two
            Column construction for 0° cuts on solid material and steel profiles,
            Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard
            equipment
            includes:
            + Powered chip conveyor, can be installed on the right or left of the machine.
            + Clamping pressure regulation of the vices.
            + Feeder with vertical rollers for lateral material support.
            + Numerically controlled band saw machines, which are also operated semi-
            automatically
            can be done with the new MEP 50, especially from MEP for automatic
            Machine developed, Windows “CE” based control.
            + Cutting cycle “clean cut” The feeder pushes the workpiece
            at the back to avoid scoring on the cutting surface when the tape
            moves up again at the end of the cut.
            + Fieldbus communication system with double microprocessor and serial
            Connection.
            + The user interface with 7” touch screen display and mechanical
            Buttons are used to ensure the operating functions of the sawing machine
            reliable, simple and intuitive use, as well as a
            Real-time control of all cutting parameters


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP - VOLLAUTOMAT SHARK 332-1 NC 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66310 · Band Saw - Automatic - Horizontal

          MEP - VOLLAUTOMAT - SHARK 332-1 NC 5.0 - - -Neu- - NC

          Technical details
          cutting diameter 300 mm︱saw band length 3320 x 27 x 0,9 mm mm︱cutting width 300 mm︱Control NC ︱capacity 90 degrees: flat 330x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: square 250 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱band speed 15 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 3,3 x 2,83 x 2,23 m︱
          Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts
            cutting diameter 300 mm
            saw band length 3320 x 27 x 0,9 mm mm
            cutting width 300 mm
            Control NC
            capacity 90 degrees: flat 330x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 45 degrees: square 250 mm
            capacity 45 degrees: flat 270 x 200 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            band speed 15 - 100 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 3,3 x 2,83 x 2,23 m
            Description :
            Furnishing:
            - fully automatic electro-hydraulic band saw with additional
            semi-automatic, semi-automatic-dynamic and
            manual operation
            - Automatic cycle (cuts from 0° to 60° left)
            - Semi-automatic, semi-automatic-dynamic and
            manual cycle (cuts from 45° right to 60° left)
            - Manual or semi-automatic dynamic cycle to make cuts outside
            of series production can be carried out directly without programming.
            - Numerically controlled band saw machines with the new, especially from MEP
            Windows CE based controller developed for automatic machines.
            - User interface with touch screen display of 7 and mechanical buttons for
            the operating functions of the sawing machine.
            - Stepless regulation of the cutting speed from 15 to 100 m/min
            Frequency converter (inverter).
            - Material feed with stepper motor via ball screw
            - which is mounted on opposite ball bearings; Single stroke 600 mm
            - repeatable to cut to any length.
            - Automatic monitoring of cutting load
            - through a servo valve mounted directly on the cylinder.
            - The coolant pan is installed in the base frame
            - Chip clearing brush.
            - Bimetal saw band for solid and profile material.
            - Tools and instructions for use with a list of spare parts


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP SHARK 350 CNC HS 4.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66311 · Band Saw - Automatic - Horizontal

          MEP - SHARK 350 CNC HS 4.0 - - -neu- -

          Technical details
          355 mm︱ 350 x 350 mm︱saw band length 4640 x 34 x 1,1 mm︱band speed 15 - 115 m/min︱total power requirement 5,5 kW︱weight of the machine ca. 2,8 t︱dimensions 3,2 x 2,2 x 2,7 m︱
          Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.
            355 mm
            350 x 350 mm
            saw band length 4640 x 34 x 1,1 mm
            band speed 15 - 115 m/min
            total power requirement 5,5 kW
            weight of the machine ca. 2,8 t
            dimensions 3,2 x 2,2 x 2,7 m
            Description :
            Automatic electromechanical band saw machine in two-column design for 0°
            Cuts on solid material and profiles made of steel, stainless steel and
            Steel alloys up to a maximum of 350x350 mm.

            The standard equipment includes:
            Powered chip conveyor, to be mounted on the right or left of the machine.
            Clamping pressure regulation of the vices.
            Feeder with vertical rollers for lateral material support.
            Sensors for initial material detection.
            Clamping pressure regulation.
            300 programs can be saved.
            The machine is available with a 34 or 41 band - at no extra charge.
            Price on request.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID SBS 460 VA-I / CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66274 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - SBS 460 VA-I / CNC - - -neu- -

          Technical details
          460 mm︱ 460 mm︱ 460 x 460 mm︱saw band length 5450 x 41 x 1,3 mm︱table height 800 mm︱band speed 20 - 100 m/min︱total power requirement 5,5 kW︱weight of the machine ca. 3,2 t︱dimensions 2,675x 2,15 x 2,05 m︱
          PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.
            460 mm
            460 mm
            460 x 460 mm
            saw band length 5450 x 41 x 1,3 mm
            table height 800 mm
            band speed 20 - 100 m/min
            total power requirement 5,5 kW
            weight of the machine ca. 3,2 t
            dimensions 2,675x 2,15 x 2,05 m
            Description :
            PROMOTIONAL PRICE!!!!
            2-column high-performance automatic band saws from the SBS series
            The SBS series impresses with its sophisticated technology, high quality and
            longevity
            and unrivaled, sophisticated standard equipment.
            • Modern SNC 20 control for CNC version
            • Frequency-controlled saw drive
            • Control buttons with pictograms
            • Work light
            • Powered chip brush
            • Hydraulic belt tension
            • Clamping pressure regulation
            • Double vice (before and after the belt)
            • Creep path for positioning
            • Bundle tension prepared electrically and hydraulically
            • Chip conveyor
            The SNC 20 control allows you to enter up to 20 different sawing tasks (length
            and number of pieces) conveniently and easily. When the target dimension is
            entered, the control automatically calculates the saw waste and the number of
            feeds. Additionally, the error code display system provides quick analysis for
            troubleshooting.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID X-Smart 3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66260 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - X-Smart 3 - - -neu- -

          Technical details
          310 mm︱ 310 mm︱ 340 x 310 mm︱saw band length 3730 x 34 x 1,1 mm︱table height 922 mm︱band speed 15 - 100 m/min︱total power requirement 3,0 kW︱weight of the machine ca. 1,65 t︱dimensions 1950x1755 m︱
          2-column automatic band saw X-Smart 3 • Modern CNC control, freely programmable for multiple sawing jobs various cutting lengths and quantities • Inclination of the saw frame for maximum service life of the saw band • 2-column structure linearly guided on both sides • Linear guided button for automatic cutting height detection • Hydraulic clamping pressure reduction (option) for thin-walled pipes and profiles • Hydraulic cutting pressure regulation for maximum cutting performance • Material feed carriage in bridge construction for optimal performance Transport/feed and tension of the saw material • Feed unit via precision ball screw • Double vise before and after the saw band • Electrically driven chip conveyor • Cleaning gun for easy cleaning of the system • Full fairing with easy access for maintenance and cleaning • LED work light • Minimum remaining piece length of 50 mm • Waistband tensioning device (option)
            310 mm
            310 mm
            340 x 310 mm
            saw band length 3730 x 34 x 1,1 mm
            table height 922 mm
            band speed 15 - 100 m/min
            total power requirement 3,0 kW
            weight of the machine ca. 1,65 t
            dimensions 1950x1755 m
            Description :
            2-column automatic band saw X-Smart 3
            • Modern CNC control, freely programmable for multiple sawing jobs
            various cutting lengths and quantities
            • Inclination of the saw frame for maximum service life of the saw band
            • 2-column structure linearly guided on both sides
            • Linear guided button for automatic cutting height detection
            • Hydraulic clamping pressure reduction (option) for thin-walled pipes and
            profiles
            • Hydraulic cutting pressure regulation for maximum cutting performance
            • Material feed carriage in bridge construction for optimal performance
            Transport/feed and tension of the saw material
            • Feed unit via precision ball screw
            • Double vise before and after the saw band
            • Electrically driven chip conveyor
            • Cleaning gun for easy cleaning of the system
            • Full fairing with easy access for maintenance and cleaning
            • LED work light
            • Minimum remaining piece length of 50 mm
            • Waistband tensioning device (option)


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID SBS 330 VA-I / CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66272 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - SBS 330 VA-I / CNC - - -neu- -

          Technical details
          330 mm︱ 330 mm︱ 400x330 mm︱saw band length 4570 x 34 x 1,1 mm︱table height 800 mm︱band speed 20 - 100 m/min︱total power requirement 3,7 kW︱weight of the machine ca. 2,35 t︱dimensions 2,23 x 2,15 x 1,8 m︱
          PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.
            330 mm
            330 mm
            400x330 mm
            saw band length 4570 x 34 x 1,1 mm
            table height 800 mm
            band speed 20 - 100 m/min
            total power requirement 3,7 kW
            weight of the machine ca. 2,35 t
            dimensions 2,23 x 2,15 x 1,8 m
            Description :
            PROMOTIONAL PRICE!!!!
            2-column high-performance automatic band saws from the SBS series
            The SBS series impresses with its sophisticated technology, high quality and
            longevity
            and unrivaled, sophisticated standard equipment.
            • Modern SNC 20 control for CNC version
            • Frequency-controlled saw drive
            • Control buttons with pictograms
            • Work light
            • Powered chip brush
            • Hydraulic belt tension
            • Clamping pressure regulation
            • Double vice (before and after the belt)
            • Creep path for positioning
            • Bundle tension prepared electrically and hydraulically
            • Chip conveyor
            The SNC 20 control allows you to enter up to 20 different sawing tasks (length
            and number of pieces) conveniently and easily. When the target dimension is
            entered, the control automatically calculates the saw waste and the number of
            feeds. Additionally, the error code display system provides quick analysis for
            troubleshooting.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID SBS 300 VA-I / CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66271 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - SBS 300 VA-I / CNC - - -neu- -

          Technical details
          300 mm︱ 300 mm︱ 300 x 260 mm︱saw band length 3920 x 34 x 1,1 mm︱table height 780 mm︱band speed 20 - 100 m/min︱total power requirement 3,7 kW︱weight of the machine ca. 1,65 t︱dimensions 2,0 x 2,05 x 1,7 m︱
          PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.
            300 mm
            300 mm
            300 x 260 mm
            saw band length 3920 x 34 x 1,1 mm
            table height 780 mm
            band speed 20 - 100 m/min
            total power requirement 3,7 kW
            weight of the machine ca. 1,65 t
            dimensions 2,0 x 2,05 x 1,7 m
            Description :
            PROMOTIONAL PRICE!!!!
            2-column high-performance automatic band saws from the SBS series
            The SBS series impresses with its sophisticated technology, high quality and
            longevity
            and unrivaled, sophisticated standard equipment.
            • Modern SNC 20 control for CNC version
            • Frequency-controlled saw drive
            • Control buttons with pictograms
            • Work light
            • Powered chip brush
            • Hydraulic belt tension
            • Clamping pressure regulation
            • Double vice (before and after the belt)
            • Creep path for positioning
            • Bundle tension prepared electrically and hydraulically
            • Chip conveyor
            The SNC 20 control allows you to enter up to 20 different sawing tasks (length
            and number of pieces) conveniently and easily. When the target dimension is
            entered, the control automatically calculates the saw waste and the number of
            feeds. Additionally, the error code display system provides quick analysis for
            troubleshooting.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID GBS 305 VA-I CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66223 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - GBS 305 VA-I CNC - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350x200 ︱saw band length 3375x27x0,9 mm︱band speed 18 - 100 m/min︱table height 880 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,84 t︱dimensions of the machine ca. 1,85 x 1,9 x 2,0 m︱
          Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350x200
            saw band length 3375x27x0,9 mm
            band speed 18 - 100 m/min
            table height 880 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,84 t
            dimensions of the machine ca. 1,85 x 1,9 x 2,0 m
            Description :
            Demonstration system for a SPECIAL PRICE!!
            Fully automatic miter band saw
            • miter left 45° automatic operation
            • miter left 60° semi-automatic operation (cuts without programming)
            • Material height sensor (automatic cut start recognition)
            • Frame and gear made from one piece, very quiet cut and very low vibration
            • Removable chip tray (disinfection)
            • Shockproof and ergonomic control panel with oil-resistant EPDM cover
            • Top access to the saw, material and feed unit
            • Hinged safety cover
            • Fine feed adjustment
            • Semi-auto. Cut!
            • Optimize work processes with CNC control
            Possibility to enter various parameters such as quantities and material
            lengths,
            automatic calculation of the cutting channel
            • CNC control for 10 different saw programs with 99 sub-programs for
            different lengths and quantities, e.g. 1 cutting program with various
            section lengths
            • Automatic feed unit (CNC) via ball roller spindle incremental feed
            with automatic length compensation. Adjustable for section lengths of
            2 mm to 9,999 mm, remainder length 170 mm.
            Inclusive:
            - Micro-spray device
            - Leveling elements


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID GBS 255 Super VA-I MPS


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66217 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - GBS 255 Super VA-I MPS - - - neu - -

          Technical details
          capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 870 mm︱band speed 18 - 110 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,63 t︱dimensions of the machine ca. 1,8 x 1,85 x 1,85 m︱
          Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm
            capacity 90 degrees: round 255 mm
            capacity 90 degrees: square 240 mm
            300 x 180
            saw band length 2.765 x 27 x 0,9 mm mm
            table height 870 mm
            band speed 18 - 110 m/min
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,63 t
            dimensions of the machine ca. 1,8 x 1,85 x 1,85 m
            Description :
            Miter band saw, fully automatic GBS 250 Super VA-I MPS
            • Miter left. 45° automatic operation
            • Miter left. 60° semi-automatic operation
            (cuts without programming)
            • Shockproof and ergonomic control panel
            with oil-proof EPDM cover a.
            • Material height sensor c.
            (Automatic cut start detection)
            • Frame and gearbox made from one piece,
            very quiet cutting and very low vibration
            • Chip tray can be removed (disinfection)
            • Easy access to the saw, material and feed unit
            • Foldable safety cover
            • Fine feed adjustment
            • Semi-automatic. Cut!

            Saw automatically with microprocessor control
            Adjustable for 2 program levels
            Semi-automatic operation
            Fully automatic operation
            Start after entering the desired number and length: material cut-
            Cutting execution and piece counting until the program is fulfilled
            • MPS control for entering the desired number of feeds
            • All important machine data is shown on the LED display during the
            Cutting process displayed (power consumption, cutting time, number of pieces)
            • The entered data is in RAM memory
            • The autodiagnostic circuit automatically shows all irregularities
            as an error message and checks the entire process
            • Feed unit mounted floating.
            • Length adjustment via handwheel and vernier with mechanical position
            indicator.
            Adjustable for section lengths from 2.5 mm to 420 mm or through
            Automatic reversing can be repeated 1 - 29 times, remaining piece length 210
            mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID GBS 310/400 VA-I CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66226 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - GBS 310/400 VA-I CNC - - - neu - -

          Technical details
          capacity 90 degrees: round 310 mm︱capacity 90 degrees: square 280 mm︱ 400x250 ︱saw band length 4020x34x1,1 mm︱band speed 18 - 100 m/min︱table height 890 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,99 t︱dimensions of the machine ca. 1,85 x 2,2 x 2,0 m︱
          Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.
            capacity 90 degrees: round 310 mm
            capacity 90 degrees: square 280 mm
            400x250
            saw band length 4020x34x1,1 mm
            band speed 18 - 100 m/min
            table height 890 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,99 t
            dimensions of the machine ca. 1,85 x 2,2 x 2,0 m
            Description :
            Miter band saw, fully automatic, GBS 310/400 VA-I CNC
            • miter left 45° automatic operation
            • miter left 60° semi-automatic operation (cuts without programming)
            • Material height sensor (automatic cut start detection)
            • Frame and gear made from one piece, very quiet cut and very low vibration
            • Removable chip tray (disinfection)
            • Shockproof and ergonomic control panel with oil-resistant EPDM cover
            • Top access to the saw, material and feed unit
            • Hinged safety cover
            • Fine feed adjustment
            • Semi-auto. Cut!

            • Optimize work processes with CNC control
            Possibility to enter various parameters such as quantities and material
            lengths,
            automatic calculation of the cutting channel
            • CNC control for 10 different saw programs with 99 sub-programs for
            different lengths and quantities, e.g. 1 cutting program with various
            section lengths
            • Automatic feed unit (CNC) via ball roller spindle incremental feed
            with automatic length compensation. Adjustable for section lengths of
            2 mm to 9,999 mm, remainder length 170 mm.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID K-tech DG 1.202


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66252 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - K-tech DG 1.202 - - - neu - -

          Technical details
          capacity 90 degrees: round 680 mm︱capacity 90 degrees: square 640 mm︱ 1250x600 mm︱capacity 45 degrees: round 680 mm︱capacity 45 degrees: square 600 mm︱capacity 45 degrees: flat 870x600 mm︱capacity 60 degrees: round 580/550 mm︱capacity 60 degrees: square 530/450 mm︱capacity 60 degrees: flat 550x450 mm︱saw band length 8140 x 54 x 1,6 mm︱band speed 15 - 90 m/min︱table height 855 mm︱total power requirement 7,5 kW︱weight of the machine ca. 5,3 t︱dimensions of the machine ca. 5,75 x 4,2 x 2,75 m︱
          2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.
            capacity 90 degrees: round 680 mm
            capacity 90 degrees: square 640 mm
            1250x600 mm
            capacity 45 degrees: round 680 mm
            capacity 45 degrees: square 600 mm
            capacity 45 degrees: flat 870x600 mm
            capacity 60 degrees: round 580/550 mm
            capacity 60 degrees: square 530/450 mm
            capacity 60 degrees: flat 550x450 mm
            saw band length 8140 x 54 x 1,6 mm
            band speed 15 - 90 m/min
            table height 855 mm
            total power requirement 7,5 kW
            weight of the machine ca. 5,3 t
            dimensions of the machine ca. 5,75 x 4,2 x 2,75 m
            Description :
            2-column double miter band saw for quick cutting
            with pusher system P15. Option P30
            Hydraulic saw frame lowering
            • NC controlled
            • Automatic angular positioning from + 60° to – 60°
            High quality automatic miter adjustment
            Special development for cutting profiles and beams.
            The highest positioning accuracy is achieved via the new “B&S positioning
            system”.
            reached. An intelligent NC control ensures smooth interaction
            of linear encoder and self-braking positioning motor in conjunction with
            a reliable hydraulic brake using large radial center positioning.
            The work table is supported by high-quality preloaded bearings, which
            ensure very smooth rotation.
            CNC Control
            A CNC control allows the programming of up to 90 cutting programs
            with different section lengths, quantities and mitres.
            Positioning system gripping on both sides
            The B&S pusher system, feeding and positioning system, is marked “on both sides
            “Opening gripping tongs” which are hydraulically controlled. This
            ensures safe gripping and transport of materials and
            Bundles that deviate slightly from the ideal shape. The pusher system is
            separate
            constructed and ground using ball-bearing linear guides
            Rack and guided by a frequency-driven, robust geared motor.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID K-tech DG 802


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66251 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - K-tech DG 802 - - - neu - -

          Technical details
          capacity 90 degrees: round 680 mm︱capacity 90 degrees: square 640 mm︱ 820x610 ︱capacity 45 degrees: round 550 mm︱capacity 45 degrees: square 550 mm︱capacity 45 degrees: flat 550x600 mm︱capacity 60 degrees: round 370 mm︱capacity 60 degrees: square 370 mm︱capacity 60 degrees: flat 370x600/450 mm︱saw band length 7260 x 41 x 1,3 mm︱band speed 15 - 100 m/min︱table height 800 mm︱total power requirement 5,5 kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 5,85 x 3,7 x 2,7 m︱
          2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.
            capacity 90 degrees: round 680 mm
            capacity 90 degrees: square 640 mm
            820x610
            capacity 45 degrees: round 550 mm
            capacity 45 degrees: square 550 mm
            capacity 45 degrees: flat 550x600 mm
            capacity 60 degrees: round 370 mm
            capacity 60 degrees: square 370 mm
            capacity 60 degrees: flat 370x600/450 mm
            saw band length 7260 x 41 x 1,3 mm
            band speed 15 - 100 m/min
            table height 800 mm
            total power requirement 5,5 kW
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 5,85 x 3,7 x 2,7 m
            Description :
            2-column double miter band saw for quick cutting
            with pusher system P15. Option P30
            Hydraulic saw frame lowering
            • NC controlled
            • Automatic angular positioning from + 60° to – 60°
            High quality automatic miter adjustment
            Special development for cutting profiles and beams.
            The highest positioning accuracy is achieved via the new “B&S positioning
            system”.
            reached. An intelligent NC control ensures smooth interaction
            of linear encoder and self-braking positioning motor in conjunction with
            a reliable hydraulic brake using large radial center positioning.
            The work table is supported by high-quality preloaded bearings, which
            ensure very smooth rotation.
            CNC Control
            A CNC control allows the programming of up to 90 cutting programs
            with different section lengths, quantities and mitres.
            Positioning system gripping on both sides
            The B&S pusher system, feeding and positioning system, is marked “on both sides
            “Opening gripping tongs” which are hydraulically controlled. This
            ensures safe gripping and transport of materials and
            Bundles that deviate slightly from the ideal shape. The pusher system is
            separate
            constructed and ground using ball-bearing linear guides
            Rack and guided by a frequency-driven, robust geared motor.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID K-tech 1200 H


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66245 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - K-tech 1200 H - - - neu - -

          Technical details
          capacity 90 degrees: round 680 mm︱capacity 90 degrees: square 640 mm︱ 1250x600 ︱saw band length 8140x54x1,6 mm︱band speed 15 - 90 m/min︱table height 855 mm︱total power requirement 7,5 kW︱weight of the machine ca. 4,96 t︱dimensions of the machine ca. 5,7 x 4,0 x 2,75 m︱
          2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.
            capacity 90 degrees: round 680 mm
            capacity 90 degrees: square 640 mm
            1250x600
            saw band length 8140x54x1,6 mm
            band speed 15 - 90 m/min
            table height 855 mm
            total power requirement 7,5 kW
            weight of the machine ca. 4,96 t
            dimensions of the machine ca. 5,7 x 4,0 x 2,75 m
            Description :
            2-column band saw for quick cutting, K-tech 1200H
            with pusher system P 30. P 60 (option),
            Fast, quiet and ergonomic cutting
            Special development for cutting profiles and beams
            as well as solid material. The material is fixed
            vertically on and section sides. The machine is from K-tech 800 H
            standard with an additional horizontal vice
            equipped. The interaction of the hydraulic
            Saw frame lowering, material positioning and the
            Pusher system is CNC controlled.
            The machines come standard with the environmentally friendly
            “B&S-Clean Cut cutting system” with minimal quantity lubrication
            equipped. This saves cleaning effort and is gentle
            Resources.
            CNC Control
            A CNC control allows programming of up to
            up to 90 cutting programs with different cut lengths,
            Quantities and mitres.
            The B&S pusher system, feeding and positioning system, is marked “on both sides
            “Opening gripping tongs” which are hydraulically controlled. This
            ensures safe gripping and transport of materials and
            Bundles that deviate slightly from the ideal shape. The pusher system is
            separate
            constructed and ground using ball-bearing linear guides
            Rack and guided by a frequency-driven, robust geared motor.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID K-tech 800 H


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66244 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - K-tech 800 H - - - neu - -

          Technical details
          capacity 90 degrees: round 680 mm︱capacity 90 degrees: square 640 mm︱ 820x610 ︱saw band length 5850 x 41 x 1,3 mm︱band speed 15 - 100 m/min︱table height 800 mm︱total power requirement 5,5 kW︱weight of the machine ca. 4,45 t︱dimensions of the machine ca. 5,85 x 3,6 x 2,7 m︱
          2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.
            capacity 90 degrees: round 680 mm
            capacity 90 degrees: square 640 mm
            820x610
            saw band length 5850 x 41 x 1,3 mm
            band speed 15 - 100 m/min
            table height 800 mm
            total power requirement 5,5 kW
            weight of the machine ca. 4,45 t
            dimensions of the machine ca. 5,85 x 3,6 x 2,7 m
            Description :
            2-column band saw for quick cutting, K-tech 800H
            with pusher system P 15. P 30 (option),
            Fast, quiet and ergonomic cutting
            Special development for cutting profiles and beams
            as well as solid material. The material is fixed
            vertically on and section sides. The machine is from K-tech 800 H
            standard with an additional horizontal vice
            equipped. The interaction of the hydraulic
            Saw frame lowering, material positioning and the
            Pusher system is CNC controlled.
            The machines come standard with the environmentally friendly
            “B&S-Clean Cut cutting system” with minimal quantity lubrication
            equipped. This saves cleaning effort and is gentle
            Resources.
            CNC Control
            A CNC control allows programming of up to
            up to 90 cutting programs with different cut lengths,
            Quantities and mitres.
            The B&S pusher system, feeding and positioning system, is marked “on both sides
            “Opening gripping tongs” which are hydraulically controlled. This
            ensures safe gripping and transport of materials and
            Bundles that deviate slightly from the ideal shape. The pusher system is
            separate
            constructed and ground using ball-bearing linear guides
            Rack and guided by a frequency-driven, robust geared motor.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID K-tech 60/48 CNC VS 500


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66246 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - K-tech 60/48 CNC VS 500 - - - neu - -

          Technical details
          capacity 90 degrees: round 510 mm︱capacity 90 degrees: square 480 mm︱ 610 x 450 ︱saw band length 5320 x 34 x 1,1 mm︱band speed 15 - 100 m/min︱table height 820 mm︱total power requirement 3,0 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,65 x 2,8 x 2,2 m︱
          For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry
            capacity 90 degrees: round 510 mm
            capacity 90 degrees: square 480 mm
            610 x 450
            saw band length 5320 x 34 x 1,1 mm
            band speed 15 - 100 m/min
            table height 820 mm
            total power requirement 3,0 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,65 x 2,8 x 2,2 m
            Description :
            For miter cuts up to 45° left in fully automatic
            Operation and up to 60° left in semi-automatic operation
            Material height sensor (automatic cut start detection)
            Automatic feed unit via ball screw with incremental feed
            automatic length compensation
            Button on the saw band for automatic adjustment of the saw stroke
            Fully automatic control of the saw frame and clamping device
            Hydraulic unit with automatic pressure shut-off when idling
            Mechanical chip clearing brush feed vice opening on both sides
            Remaining piece length 100 mm
            Modern CNC control freely programmable for multiple sawing jobs with various
            Cutting lengths and quantities.
            Automatic feed unit 500 mm via ball screw incremental feed with
            automatic length compensation. Adjustable for section lengths of 25 –
            9,999mm.
            Fully hydraulic control of saw frames and clamping devices
            Preselection of 3 different material feed speeds
            Visualization of the entire workflow with simple data entry


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID GBS 255 VA-I CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66218 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - GBS 255 VA-I CNC - - - neu - - CNC

          Technical details
          capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 870 mm︱band speed 18 - 110 m/min︱Control CNC ︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,63 t︱dimensions of the machine ca. 1,8 x 1,85 x 1,85 m︱
          Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.
            capacity 90 degrees: round 255 mm
            capacity 90 degrees: square 240 mm
            300 x 180
            saw band length 2.765 x 27 x 0,9 mm mm
            table height 870 mm
            band speed 18 - 110 m/min
            Control CNC
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,63 t
            dimensions of the machine ca. 1,8 x 1,85 x 1,85 m
            Description :
            Miter band saw, fully automatic GBS 255 Super VA-I CNC
            • miter left 45° automatic operation
            • miter left 60° semi-automatic operation (cuts without programming)
            • Material height sensor (automatic cut start detection)
            • Frame and gearbox made from one piece, very quiet cut and very low vibration
            • Removable chip tray (disinfection)
            • Shockproof and ergonomic control panel with oil-resistant EPDM cover
            • High performance positioning with incremental encoder (CNC) c.
            • Top access to the saw, material and feed unit
            • Hinged safety cover
            • Fine feed adjustment
            • Semi-auto. Cut!
            • Optimize work processes with CNC control
            Possibility to enter various parameters such as quantities and material
            lengths,
            automatic calculation of the cutting channel
            • CNC control for 10 different saw programs with 99 sub-programs for
            different lengths and quantities, e.g. 1 cutting program with various
            section lengths
            • Automatic feed unit (CNC) via ball roller spindle incremental feed
            with automatic length compensation. Adjustable for section lengths of
            2 mm to 9,999 mm, remainder length 170 mm.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •