.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Bandsaw - Horizontal

          Machinelist: Bandsaw - Horizontal


          Bandsaw - Horizontal

          used Saws Bandsaw - Horizontal ZIMMER Z 100/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04552 · Bandsaw - Horizontal

          ZIMMER - Z 100/R - - 2019 -

          Technical details
          cutting diameter 105 mm︱saw band length 1140 x 13 x 0,65 mm︱cutting width 100/100x105 mm︱capacity 60 degrees: round mm︱capacity 45 degrees: flat 55 x 55 mm︱capacity 45 degrees: round 60 mm︱total power requirement 0,18 kW︱weight of the machine ca. 18 kg︱dimensions of the machine ca. ca.400 x 300 x 350 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use.
            cutting diameter 105 mm
            saw band length 1140 x 13 x 0,65 mm
            cutting width 100/100x105 mm
            capacity 45 degrees: flat 55 x 55 mm
            capacity 45 degrees: round 60 mm
            total power requirement 0,18 kW
            weight of the machine ca. 18 kg
            dimensions of the machine ca. ca.400 x 300 x 350 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.



            Gear drive, automatic belt tension, electronically adjustable
            Belt speed from 20 to 100 m / min
            Due to the light aluminum housing, the machine is very light and therefore good
            mobile use.


        • Schmeisser Werkzeugmaschinen
        • Lochfelbenstrasse 2
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal ZIMMER Z185/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04495 · Bandsaw - Horizontal

          ZIMMER - Z185/R - - -

          Technical details
          cutting diameter 185 mm︱saw band length 2.080 x 20 x 0,90 mm︱cutting width 100x185 mm︱connected load frequency 230 V︱band speed 35 und 70 stufenlos m/min︱mitre joint 90° (angle-iron till) 60 °︱total power requirement 2,35 KW︱weight of the machine ca. 195 kg︱dimensions of the machine ca. 1280 x 550 x 1480 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw arm remains in the desired position. * Metal band saw with stepless electronic speed regulation and automatic lowering * Selector switch for hydraulically controlled or manual belt arm lowering * Saw arm can be swiveled up to 60 ° to the right * Quick release vice * Tape guide with 8 ball bearings * Hydraulic saw band tensioning with tensioning pressure display and cut off of the band breakage * including coolant device * including machine base cabinet The Z185 / R has the following standard equipment: - hydraulic cylinders - emulsion pump - eccentric clamp - underframe - saw band The machine is fully assembled and delivered immediately ready for use Technical specifications: Motor power: 230 V / 2.35 kW Cutting speed: 30 - 75 m / min. stepless Saw band dimensions: 2.085 x 20x 0.9 mm Footprint: 550 x 1,280 x 1,480 mm Working height: 915 mm Weight: 190 kg
            cutting diameter 185 mm
            saw band length 2.080 x 20 x 0,90 mm
            cutting width 100x185 mm
            connected load frequency 230 V
            band speed 35 und 70 stufenlos m/min
            mitre joint 90° (angle-iron til. 60 °
            total power requirement 2,35 KW
            weight of the machine ca. 195 kg
            dimensions of the machine ca. 1280 x 550 x 1480 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            An inexpensive and powerful band saw for sporadic workshop use

            The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° -
            60 ° left.
            After the cut, the machine stops due to a safety limit switch.
            The lowering is continuously adjustable via a hydraulic system.
            The manual lifting of the saw arm after the cut can - on any
            Position. The saw arm remains in the desired position.

            * Metal band saw with stepless electronic speed regulation and
            automatic lowering
            * Selector switch for hydraulically controlled or manual belt arm lowering
            * Saw arm can be swiveled up to 60 ° to the right
            * Quick release vice
            * Tape guide with 8 ball bearings
            * Hydraulic saw band tensioning with tensioning pressure display and cut off of
            the band breakage
            * including coolant device
            * including machine base cabinet

            The Z185 / R has the following standard equipment:

            - hydraulic cylinders
            - emulsion pump
            - eccentric clamp
            - underframe
            - saw band

            The machine is fully assembled and delivered immediately ready for use

            Technical specifications:
            Motor power: 230 V / 2.35 kW
            Cutting speed: 30 - 75 m / min. stepless
            Saw band dimensions: 2.085 x 20x 0.9 mm
            Footprint: 550 x 1,280 x 1,480 mm
            Working height: 915 mm
            Weight: 190 kg



        • Schmeisser Werkzeugmaschinen
        • Lochfelbenstrasse 2
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A horizontal bandsaw is the right tool for you
          Experience versatility and reliability with a horizontal bandsaw

          Bandsaws are extremely versatile machines in the world of metalworking. They can be used to cut a wide variety of materials at varying speeds. They come in several different sizes meaning you can find the perfect one for home or business use based on your needs. A horizontal bandsaw is a great investment as it can be used for a variety of project sizes from metalworking to woodworking. Find your next horizontal bandsaw at LagerMaschinen.

          Find used metalworking machines at LagerMaschinen

          Bandsaws offer operators a variety of advantages over other cutting methods. The uniform distribution of teeth on the cutting blade makes a horizontal bandsaw particularly useful for cutting curved and irregular shapes in metal or wood. Bandsaws offer a high level of consistency in their cuts. If you're looking to invest in a horizontal bandsaw or any other industrial equipment why not check out the variety of used equipment available at LagerMaschinen your source for the best in used machinery.

          Investing in used machinery is a smart move for any business

          When buying equipment for your home or business budgetary concerns always play a role. Optimizing both your time and money is a smart plan and can be easily done by shopping online for used equipment. Buying used machines doesn't mean sacrificing quality for affordability. If you're looking for a horizontal bandsaw or any other cutting machines you can search for products by price or location using LagerMaschinen's user-friendly platform. Save yourself time money and hassle using LagerMaschinen for your next purchase.


          Find your next automatic horizontal band saw here!
          An automatic horizontal band saw for all your needs

          Band saws are classic cutting tools that can be used on a number of different materials. Their versatility makes them perennial favorites among both hobbyists and industry specialists alike. An automatic horizontal band saw can be used both in a home workshop or in a larger factory setting. It is capable of cutting metals as well as timber. When the cutting process is complete the saw blade is automatically stopped ensuring the safety of the operator.

          Bandsaws are functional and practical for home or business

          Band saws are typically categorized into vertical and horizontal machines. Vertical band saws have a stationary blade while an automatic horizontal band saw has a mobile blade that moves through a stationary cutting surface. You can find an automatic horizontal band saw in a variety of sizes making it one of the more versatile cutting tools available. It is useful for cutting a wide variety of materials too. If you're in the market for a band saw check the selection of used machinery available at LagerMaschinen.

          Buying used machinery online is a smart investment

          Nowadays both time and money are things that scarcely anyone can afford to waste. LagerMaschinen looks to help you make the most of both by making the process of shopping for used machinery online as quick and easy as possible. For example you can search for a used automatic horizontal band saw and filter your results by price model or location to find the best machine to suit your needs. Visit LagerMaschinen to see all the advantages of online shopping!