.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Single Column Drawing Press - Hydraulic

          Machinelist: Single Column Drawing Press - Hydraulic


          Drawing Press - 1-Col.Hydr.

          used Presses Drawing Press - 1-Col.Hydr. PME PHY 250 C


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233023V · Drawing Press - 1-Col.Hydr.

          PME - PHY 250 C - - 2007 - Siemens S 7

          Technical details
          pressure 250 t︱stroke 600 mm︱throat 360 mm︱dayligth 800 mm︱table surface area 1400 x 700 mm︱table height over floor 1030 mm︱ram surface 1100 X 600 mm︱feed down 300 mm/s︱feed up 480 mm/s︱working feed 69 mm/s︱oil volume l︱power requirement 55,0 kW︱Weight 11,0 t︱dimensions of the machine ca. 2,2 x 3,2 x 3,4 m︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on way, light-guard (Sick) on front new, two-hand operation
            pressure 250 t
            stroke 600 mm
            throat 360 mm
            dayligth 800 mm
            table surface area 1400 x 700 mm
            table height over floor 1030 mm
            ram surface 1100 X 600 mm
            feed down 300 mm/s
            feed up 480 mm/s
            working feed 69 mm/s
            power requirement 55,0 kW
            Weight 11,0 t
            dimensions of the machine ca. 2,2 x 3,2 x 3,4 m
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on way, light-guard (Sick) on front new, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. MUELLER CEZ 63.5.10 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133027 · Drawing Press - 1-Col.Hydr.

          MUELLER - CEZ 63.5.10 (UVV) - - 1991 - konventionell

          Technical details
          pressure 63 t︱throat 325 mm︱stroke 560 mm︱dayligth 700 mm︱table surface area 640 x 640 mm︱die cushion capacity 25 t︱die cushion stroke 200 mm︱die cushion area 450 x 450 mm︱table height over floor 800 mm︱ram surface 560 x 560 mm︱oil volume 450 l︱total power requirement 15,0 kW︱weight of the machine ca. 7,0 t︱required space 1,2 x 2,0 x 3,1 m︱
          year of manufacture 1971 overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation press can be inspected in running condition in our warehouse
            pressure 63 t
            throat 325 mm
            stroke 560 mm
            dayligth 700 mm
            table surface area 640 x 640 mm
            die cushion capacity 25 t
            die cushion stroke 200 mm
            die cushion area 450 x 450 mm
            table height over floor 800 mm
            ram surface 560 x 560 mm
            oil volume 450 l
            total power requirement 15,0 kW
            weight of the machine ca. 7,0 t
            required space 1,2 x 2,0 x 3,1 m
            Description :
            year of manufacture 1971
            overhaul 1991
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. LAUFFER EZU 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103057 · Drawing Press - 1-Col.Hydr.

          LAUFFER - EZU 100 (UVV) - - 1989 - konventionell

          Technical details
          pressure 100 t︱stroke 560 mm︱throat 540 mm︱dayligth 800 mm︱table surface area 1000 x 1000 mm︱die cushion capacity 50 t︱die cushion stroke 200 mm︱die cushion area 710 x 650 mm︱table height over floor 910 mm︱ram surface 1000 x 1000 mm︱feed down 400 mm/s︱feed up 300 mm/s︱working feed 57,7 mm/s︱oil volume 650 l︱power requirement 37,5 kW︱Weight 15,0 t︱dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 100 t
            stroke 560 mm
            throat 540 mm
            dayligth 800 mm
            table surface area 1000 x 1000 mm
            die cushion capacity 50 t
            die cushion stroke 200 mm
            die cushion area 710 x 650 mm
            table height over floor 910 mm
            ram surface 1000 x 1000 mm
            feed down 400 mm/s
            feed up 300 mm/s
            working feed 57,7 mm/s
            oil volume 650 l
            power requirement 37,5 kW
            Weight 15,0 t
            dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. DUNKES HZS 250


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0024 · Drawing Press - 1-Col.Hydr.

          DUNKES - HZS 250 - - 1989 -

          Technical details
          Press capacity 250 t︱Throat depth 430 mm︱Stroke 300 mm︱Daylight 500 mm︱Table surface area 1.100 x 850 mm︱Approach speed 330 mm / s︱Working speed 11 - 30 mm / s︱Return speed 330 mm / s︱Die cushion capacity in table 80 t︱Die cushion stroke 100 mm︱Ejector in ram 5 t︱Ejector stroke in ram 75 mm︱Oil volume 1.400 l︱Dimensions L x W x H 3.200 x 2.500 x 4.250 mm︱Weight of machine approx. 32 t︱
            Press capacity 250 t
            Throat depth 430 mm
            Stroke 300 mm
            Daylight 500 mm
            Table surface area 1.100 x 850 mm
            Approach speed 330 mm / s
            Working speed 11 - 30 mm / s
            Return speed 330 mm / s
            Die cushion capacity in table 80 t
            Die cushion stroke 100 mm
            Ejector in ram 5 t
            Ejector stroke in ram 75 mm
            Oil volume 1.400 l
            Dimensions L x W x H 3.200 x 2.500 x 4.250 mm
            Weight of machine approx. 32 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. SMG CSZ 63


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113030 · Drawing Press - 1-Col.Hydr.

          SMG - CSZ 63 - - 1979 - konventionell

          Technical details
          pressure 63 t︱stroke 200 mm︱throat 320 mm︱dayligth 450 mm︱table surface area 750 x 600 mm︱die cushion capacity 6,5 t︱die cushion stroke 80 mm︱die cushion area 240 mm︱table height over floor 800 mm︱ram surface 500 x 450 mm︱feed down 300 mm/s︱feed up 300 mm/s︱working feed 50 mm/s︱oil volume 380 l︱power requirement 12,0 kW︱Weight 6,5 t︱dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm︱
          with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop
            pressure 63 t
            stroke 200 mm
            throat 320 mm
            dayligth 450 mm
            table surface area 750 x 600 mm
            die cushion capacity 6,5 t
            die cushion stroke 80 mm
            die cushion area 240 mm
            table height over floor 800 mm
            ram surface 500 x 450 mm
            feed down 300 mm/s
            feed up 300 mm/s
            working feed 50 mm/s
            oil volume 380 l
            power requirement 12,0 kW
            Weight 6,5 t
            dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm
            Description :
            with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. SMG CS 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183027 · Drawing Press - 1-Col.Hydr.

          SMG - CS 100 (UVV) - - 1978 - konventionell

          Technical details
          pressure 100 t︱stroke 150 mm︱throat 345 mm︱dayligth 400 mm︱table surface area 1200 x 600 mm︱table height over floor 850 mm︱ram surface 560 x 500 mm︱feed down 350 mm/s︱feed up 350 mm/s︱working feed 25 mm/s︱oil volume 560 l︱power requirement 22,0 kW︱Weight 8,3 t︱dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, mechanical depth stop
            pressure 100 t
            stroke 150 mm
            throat 345 mm
            dayligth 400 mm
            table surface area 1200 x 600 mm
            table height over floor 850 mm
            ram surface 560 x 500 mm
            feed down 350 mm/s
            feed up 350 mm/s
            working feed 25 mm/s
            oil volume 560 l
            power requirement 22,0 kW
            Weight 8,3 t
            dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, mechanical depth stop


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. MUELLER CEZ 200.2.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063212 · Drawing Press - 1-Col.Hydr.

          MUELLER - CEZ 200.2.1 - - 1977 - konventionell

          Technical details
          pressure 200 t︱stroke 560 mm︱throat 360 mm︱dayligth 780 mm︱table surface area 740 x 720 mm︱die cushion capacity 80 t︱die cushion stroke 200 mm︱die cushion area 530 x 530 mm︱table height over floor 920 mm︱ram surface 560 x 560 mm︱oil volume l︱power requirement 35,0 kW︱Weight 10,0 t︱dimensions of the machine ca. 1,3 x 2,0 x 3,4 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table
            pressure 200 t
            stroke 560 mm
            throat 360 mm
            dayligth 780 mm
            table surface area 740 x 720 mm
            die cushion capacity 80 t
            die cushion stroke 200 mm
            die cushion area 530 x 530 mm
            table height over floor 920 mm
            ram surface 560 x 560 mm
            power requirement 35,0 kW
            Weight 10,0 t
            dimensions of the machine ca. 1,3 x 2,0 x 3,4 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Single Column Drawing Press - Hydraulic

          used Presses Single Column Drawing Press - Hydraulic ZEULENRODA PYE 160 SSM


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15436 · Single Column Drawing Press - Hydraulic

          ZEULENRODA - PYE 160 SSM - - unbekannt -

          Technical details
          pressure 160 t︱throat 360 mm︱stroke 500 mm︱table surface area 1250x630 mm︱ram surface 1000x450 mm︱table height 1000 mm︱dayligth 800 mm︱weight of the machine ca. 8 t︱
            pressure 160 t
            throat 360 mm
            stroke 500 mm
            table surface area 1250x630 mm
            ram surface 1000x450 mm
            table height 1000 mm
            dayligth 800 mm
            weight of the machine ca. 8 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Drawing Press - Hydraulic RÖCHER REP 160.01 SZ


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-0720866 · Single Column Drawing Press - Hydraulic

          RÖCHER - REP 160.01 SZ - - 1980 -

          Technical details
          pressure 160 t︱throat 360 mm︱stroke 250 mm︱total power requirement 37 kW︱weight of the machine ca. 15000 kg︱dimensions of the machine ca. 2300 x 1200 x 3350 mm︱
            pressure 160 t
            throat 360 mm
            stroke 250 mm
            total power requirement 37 kW
            weight of the machine ca. 15000 kg
            dimensions of the machine ca. 2300 x 1200 x 3350 mm


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Drawing Press - Hydraulic MÜLLER CEZ 160.5.8


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-600360 · Single Column Drawing Press - Hydraulic

          MÜLLER - CEZ 160.5.8 - - 1977 -

          Technical details
          pressure 160 t︱throat 360 mm︱stroke 560 mm︱total power requirement 33 kW︱weight of the machine ca. 6000 kg︱dimensions of the machine ca. 2000x2400x3650 mm︱
            pressure 160 t
            throat 360 mm
            stroke 560 mm
            total power requirement 33 kW
            weight of the machine ca. 6000 kg
            dimensions of the machine ca. 2000x2400x3650 mm


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Tryout Press - hydraulic

          used Presses Tryout Press - hydraulic PROFIPRESS 200T M/H-M/C2-1500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00609 · Tryout Press - hydraulic

          PROFIPRESS - 200T M/H-M/C2-1500 - - neu / new -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area 1500 x 560 mm︱feed down 9,2 mm/sec︱feed up 12,3 mm/sec︱feed under pressure 2,7 mm/sec︱column daylight 1500 mm︱total power requirement 4 kW︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • moveable pressure cylinder, • extended version, • additional manual pump, • CE,
            pressure 200 t
            stroke 400 mm
            table surface area 1500 x 560 mm
            feed down 9,2 mm/sec
            feed up 12,3 mm/sec
            feed under pressure 2,7 mm/sec
            column daylight 1500 mm
            total power requirement 4 kW
            weight of the machine ca. 1,7 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • moveable pressure cylinder,
            • extended version,
            • additional manual pump,
            • CE,


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 160T M/H-M/C2 - 1500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00611 · Tryout Press - hydraulic

          PROFIPRESS - 160T M/H-M/C2 - 1500 - - neu / new -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 1500 x 560 mm︱feed down 9,2 mm/sec︱feed up 12,3 mm/sec︱feed under pressure 2,7 mm/sec︱column daylight 1500 mm︱total power requirement 4 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • movable cylinder, • extended version, • additionally with manual pump, • CE signed
            pressure 160 t
            stroke 400 mm
            table surface area 1500 x 560 mm
            feed down 9,2 mm/sec
            feed up 12,3 mm/sec
            feed under pressure 2,7 mm/sec
            column daylight 1500 mm
            total power requirement 4 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • movable cylinder,
            • extended version,
            • additionally with manual pump,
            • CE signed


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 30M/H-2


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010023 · Tryout Press - hydraulic

          PROFIPRESS - 30M/H-2 - - neu -

          Technical details
          pressure 30 t︱stroke 400 mm︱table surface area 700 x 445 mm︱pressing speed 2,6 mm/sec︱feed speeds 9,9 mm/sec︱return speed 12,1 mm/sec︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 30 t
            stroke 400 mm
            table surface area 700 x 445 mm
            pressing speed 2,6 mm/sec
            feed speeds 9,9 mm/sec
            return speed 12,1 mm/sec
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 15H


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00608 · Tryout Press - hydraulic

          PROFIPRESS - 15H - - neu -

          Technical details
          pressure 15 t︱stroke 150 mm︱table surface area 500 x 150 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 15 t
            stroke 150 mm
            table surface area 500 x 150 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 30H


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00617 · Tryout Press - hydraulic

          PROFIPRESS - 30H - - neu -

          Technical details
          pressure 30 t︱stroke 220 mm︱table surface area 560 x 230 mm︱total power requirement / kW︱weight of the machine ca. 0,21 t︱dimensions of the machine ca. 1 x 0,7 x 2 m︱
          • Work shop press with manual pump
            pressure 30 t
            stroke 220 mm
            table surface area 560 x 230 mm
            total power requirement / kW
            weight of the machine ca. 0,21 t
            dimensions of the machine ca. 1 x 0,7 x 2 m
            Description :
            • Work shop press with manual pump


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 160TON M/H-M/C 1


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00612 · Tryout Press - hydraulic

          PROFIPRESS - 160TON M/H-M/C 1 - - neu -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 920 x 560 mm︱feed down 4,8 mm/sec︱feed up 6,4 mm/sec︱total power requirement 4 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,7 x 0,9 x 2,1 m︱
          • Pressure cylinder moveable • Reduction price by fixed cylinder: € 410,-, • Surcharge for 2 speeds: € 600,-
            pressure 160 t
            stroke 400 mm
            table surface area 920 x 560 mm
            feed down 4,8 mm/sec
            feed up 6,4 mm/sec
            total power requirement 4 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,7 x 0,9 x 2,1 m
            Description :
            • Pressure cylinder moveable
            • Reduction price by fixed cylinder: € 410,-,
            • Surcharge for 2 speeds: € 600,-


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic METALLKRAFT WPP 20 BK


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370020 · Tryout Press - hydraulic

          METALLKRAFT - WPP 20 BK - - NEU -

          Technical details
          pressure 20 t︱stroke 160 mm︱table surface area 690 x 950 x 180 mm︱weight of the machine ca. 210 kg︱dimensions of the machine ca. 1010 x 650 x 1750 mm︱
            pressure 20 t
            stroke 160 mm
            table surface area 690 x 950 x 180 mm
            weight of the machine ca. 210 kg
            dimensions of the machine ca. 1010 x 650 x 1750 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030195 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 30 - - Neu -

          Technical details
          30 to︱stroke 400 mm︱column daylight 740 mm︱ 300 mm︱total power requirement 2,2 kW︱weight of the machine ca. 600 kg︱dimensions 1200x800x2100 mm︱
          Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark
            30 to
            stroke 400 mm
            column daylight 740 mm
            300 mm
            total power requirement 2,2 kW
            weight of the machine ca. 600 kg
            dimensions 1200x800x2100 mm
            Description :
            Further information:
            stable welded construction
            Printing cylinder adjustable
            Operation electrically via shift lever / manually via hand lever
            Pressure display by manometer
            Height of material supports adjustable by cylinder
            CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 80


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030078 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 80 - - Neu -

          Technical details
          pressure 80 t︱stroke 400 mm︱column daylight 920 mm︱Frame Width 300 mm︱total power requirement 3,0 kW︱tank capacity 31 l︱ 5,4 mm/s︱ 8,3 mm/s︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1600x580x2550 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark
            pressure 80 t
            stroke 400 mm
            column daylight 920 mm
            Frame Width 300 mm
            total power requirement 3,0 kW
            tank capacity 31 l
            5,4 mm/s
            8,3 mm/s
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 1600x580x2550 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via lever / manual over hand lever
            - Pressure gauge via pressure gauge
            - Material supports per cylinder in the height adjustable
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 100


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030075 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 100 - - Neu -

          Technical details
          pressure 100 t︱stroke 400 mm︱table surface area 920 x 560 mm︱dayligth 900 mm︱distance between columns 300 mm︱total power requirement 4,0 kW︱weight of the machine ca. 1000 kg︱dimensions of the machine ca. 1700 x 900 x 2500 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark
            pressure 100 t
            stroke 400 mm
            table surface area 920 x 560 mm
            dayligth 900 mm
            distance between columns 300 mm
            total power requirement 4,0 kW
            weight of the machine ca. 1000 kg
            dimensions of the machine ca. 1700 x 900 x 2500 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via selector lever / manually via hand lever
            - Pressure gauge via pressure gauge
            - Material requirements - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 60 T / M-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370016 · Tryout Press - hydraulic

          RHTC - 60 T / M-2 - - NEU -

          Technical details
          pressure 60 t︱stroke 380 mm︱table surface area Arbeitsbreite 750 mm︱pressure 259 bar︱oil volume 38 dm³︱ajustment speed 2,87 mm/sec︱work speed 9,5 mm/sec︱return speed 12 mm/sec︱total power requirement 2,2 kW︱weight of the machine ca. 540 kg︱
          Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.
            pressure 60 t
            stroke 380 mm
            table surface area Arbeitsbreite 750 mm
            pressure 259 bar
            oil volume 38 dm³
            ajustment speed 2,87 mm/sec
            work speed 9,5 mm/sec
            return speed 12 mm/sec
            total power requirement 2,2 kW
            weight of the machine ca. 540 kg
            Description :
            Inner diameter of the cylinder [mm]: 170
            Piston rod diameter [mm]: 75
            Diameter piston crown [mm]: 100

            - Integrated pressure gauge
            - Pressure regulator
            - Hydraulic unit with 2 speeds
            - Working table adjustable in height
            - Joystick to move the piston up / down

            The 60 ton workshop press has a fixed cylinder and a
            height-adjustable work table (motorized). Equipped with
            Pressure regulation, manometer, 2 speeds and a joystick for the
            move the piston up and down. With this joystick you can use the piston precisely
            move, making this hydraulic press perfect for precision jobs
            suitable.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 100 T / M/H-M/C-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370017 · Tryout Press - hydraulic

          RHTC - 100 T / M/H-M/C-2 - - NEU -

          Technical details
          pressure 100 t︱stroke 380 mm︱table surface area Arbeitsbreite 1100 mm︱pressure 258 bar︱oil volume 46 dm³︱ajustment speed 7,54 mm/sec︱work speed 2,47 mm/sec︱return speed 9,06 mm/sec︱total power requirement 2,2 kW︱weight of the machine ca. 970 kg︱
          Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.
            pressure 100 t
            stroke 380 mm
            table surface area Arbeitsbreite 1100 mm
            pressure 258 bar
            oil volume 46 dm³
            ajustment speed 7,54 mm/sec
            work speed 2,47 mm/sec
            return speed 9,06 mm/sec
            total power requirement 2,2 kW
            weight of the machine ca. 970 kg
            Description :
            Inner diameter of the cylinder [mm]: 220
            Piston rod diameter [mm]: 90
            Diameter piston crown [mm]: 120

            - Movable cylinder (left-right)
            - Integrated pressure gauge
            - Pressure regulator
            - Two-speed hydraulic unit
            - Working table adjustable in height
            - Joystick to move the piston up / down
            - Hand pump for precision work

            The 100 ton hydraulic press is equipped with a movable cylinder (left-
            right) and a height-adjustable work table. Over and beyond
            it has a pressure regulation, 2 speeds, a joystick and
            a hand pump for precision pressing.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 120


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030079 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 120 - - Neu -

          Technical details
          pressure 120 t︱stroke 400 mm︱Frame Width 400 mm︱distance spindle /table max. 900 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1300 kg︱dimensions of the machine ca. 1620 x 900 x 2450 mm︱
            pressure 120 t
            stroke 400 mm
            Frame Width 400 mm
            distance spindle /table max. 900 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1300 kg
            dimensions of the machine ca. 1620 x 900 x 2450 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 200 ton M/H-M/C-2 D=1300


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370019 · Tryout Press - hydraulic

          RHTC - 200 ton M/H-M/C-2 D=1300 - - NEU -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area Arbeitsbreite 1300 mm︱pressure 243 bar︱oil volume 64 dm³︱ajustment speed 5,73 mm/sec︱work speed 1,84 mm/sec︱return speed 7,08 mm/sec︱total power requirement 3,0 kW︱weight of the machine ca. 1690 kg︱
          Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.
            pressure 200 t
            stroke 400 mm
            table surface area Arbeitsbreite 1300 mm
            pressure 243 bar
            oil volume 64 dm³
            ajustment speed 5,73 mm/sec
            work speed 1,84 mm/sec
            return speed 7,08 mm/sec
            total power requirement 3,0 kW
            weight of the machine ca. 1690 kg
            Description :
            Inner diameter of the cylinder [mm]: 320
            Piston rod diameter [mm]: 140
            Diameter piston crown [mm]: 175

            - adjustable cylinder (left-right)
            - Integrated pressure gauge
            - Pressure regulator
            - Two-speed hydraulic unit
            - Working table adjustable in height
            - Joystick to move the piston up / down
            - Hand pump for precision work
            - with digital display

            This 200 ton hydraulic press is equipped with a movable cylinder (left-
            right), a height-adjustable work table, a pressure regulator, 2
            speeds, a joystick and a hand pump for precision pressing
            fitted.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          GALDABINI - ZEULENRODA - RÖCHER - MÜLLER -