Punching and Die Stamping Press

pressure 400 t︱stroke 300 mm︱Control SIEMENS S7 ︱table-size 3100 x 1400 mm︱ram head dimension 3100 x 1400 mm︱table height over floor 950 mm︱total power requirement 225 kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 4,60 x 2,10 x 4,70 m︱

---

pressure 200 t︱stroke 500 mm︱table: 1000 - 800 ︱feed down 150 -280 mm/sec︱feed under pressure 10 - 26 mm/sec︱feed up 180 - 300 mm/sec︱table height over floor 750 mm︱total power requirement 22 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. m︱

---

pressure 63 t︱passage width 1350 mm︱stroke 300 mm︱total power requirement 16 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 2,0 x 1,8 x 3,4 m︱

---

pressure 500 t︱passage width 750 mm︱stroke 120 mm︱total power requirement 57 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. m︱

---

pressure 500 t︱passage width 750 mm︱stroke 120 mm︱total power requirement 57 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. m︱

---

Capacity 500 T︱Distance between columns 6000 mm︱Machine dimensions (lxwxh) 7500 mm︱

---

Ship building presses Cylinder in the middle

Capacity 500 T︱Distance between columns 4.300 mm︱Dimension 5.100 x 900 x 4.300/5.600 mm︱

---

Brand Van de Graaf Machine no PE389 Type 500 Capacity 500 T Distance between the columns 4.300 mm Machine dimensions (L×W×H) 5.100 x 900 x 4.300 / 5.600 mm

Capacity 300 T︱Distance between columns 8000 mm︱Machine dimensions (lxwxh) 9000 mm︱

---

Ship building press Cylinder at 3,000 mm from 1 side

Capacity 16 T︱Distance between columns 650 mm︱Machine dimensions (lxwxh) 1.50 x 700 x 2.350 mm︱table length 650 mm︱table width 280 mm︱

---

Brand Wallecan Machine no PE395 Type 16 Capacity 16 T Table length 650 mm Table width 280 mm Distance between the columns 650 mm Stroke 600 mm Hydraulically driven Machine dimensions (L×W×H) 1.150 x 700 x 2.350 mm

press capacity 100 kN︱Angle 75 °︱weight of the machine ca. 55 kg︱required space 671x100x165 mm︱

---

TÜNKERS embosser PFS 900-150 75° T12-3 Year of construction 3/2020 Pneumatic toggle unit unused Weight 55kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

nominal pressure 20 kN︱Year of construction 2003 -︱weight of the machine ca. 15,3 kg︱

---

BOSCH 20kN press spindle PS20 Order no. 060860004 Nominal force 20kN with 4 connection cables 1x 3607030223290 1x 3604491057287 1x 3608870348291 1x 3604491035290y< with junction box 3607021015 with transducer 3608870347 with acceptance inspection sheet with instructions without drive motor! Weight 15.3kg used Year of construction 2003 mint condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

weight of the machine ca. 150 kg︱

---

TOX PRESSOTECHNIK Clinching tongs 55kN complete 412799 TZ 05.363171.A.004 with clinching tongs 363171 with power module 289774 with EPMR: 055.034.100.00 289774.181 with test report unused top condition Weight 150kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

press force 160 kN︱stroke length 85 mm︱power stroke 64 mm︱dimensions 120x30x63 cm︱weight 133 kg︱

---

TOX PRESSOTECHNIK Powerpackage PowerKurver KT 05.0445 No. 402937.4 with pneumohydraulic translator ES 160.100.085.64 press force 160kN stroke 85mm thereof power stroke 64mm with control unit STE 075-923-1/2" dimensions 120x30x63cm unused pre-assembled connections weight 133kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

pressure 2 t︱throat 150 mm︱stroke 150 mm︱distance table/ram, max. stroke up, adjustment up mm︱table surface area 310 x 250 mm︱hole in the table mm︱table height over floor mm︱power requirement 2,0 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,2 x 0,8 x 1,7 m︱

---

Single column press - with table base - various press accessories

pressure 160 t︱throat 350 mm︱stroke 140 mm︱dayligth 370 mm︱table surface area 750 x 620 mm︱hole in the table 220 mm︱table height over floor 850 mm︱ram surface 750 x 580 mm︱oil volume 700 l︱feed down 300 mm/sec︱feed up 480 mm/sec︱feed under pressure 58 mm/sec︱total power requirement 60 kW︱weight of the machine ca. 10,8 t︱required space 2,4 x 1,8 x 3,5 m︱

---

permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable two-hand operation 2020: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Design of the electrical control according to DIN EN ISO 16092-1/-2/-3 year of manufacture 1995

pressure 25 t︱throat 300 mm︱stroke 400 mm︱Number of working hours 1235 h︱table-size 650 x 500 mm︱ram surface 550 x 450 mm︱dayligth 700 mm︱rapid traverse - down 500 mm/sec︱work speed 27 - 72 mm/sec︱rapid traverse - up 410 mm/sec︱quantity of oil 230 l︱die cushion capacity 125 kN︱die cushion stroke 200 mm︱capacity of ejector 8 kN︱ejector stroke 150 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 1,3 x 1,6 x 2,8 m︱Electric 400 Volt ︱Light barrier in front ︱

---

Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²

pressure 25 t︱stroke 150 mm︱throat 420 mm︱dayligth 450 mm︱table surface area 700 x 820 mm︱table height over floor 850 mm︱ram surface 600 x 600 mm︱feed down 370 mm/s︱feed up 370 mm/s︱working feed 18 - 33 mm/s︱oil volume 300 l︱power requirement 5,5 kW︱Weight 5,8 t︱dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm︱

---

permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Pressing force 10 t︱oil pressure max. in the work cylinder 310 bar︱engine output 3 kW︱tracking travel 70 ms 8 mm︱weight 1650 kg︱

---

pressure 30 t︱throat max. 250 mm︱stroke max. 200 mm︱dayligth 475 mm︱table surface area 550 x 500 mm︱weight of the machine ca. 2050 kg︱power stroke 20 mm︱

---

pressure 40 t︱throat 300 mm︱stroke 630 mm︱dayligth 900 mm︱table surface area 620 x 520 mm︱hole in the table 150 mm︱table height over floor 600 mm︱ram surface 150 mm︱total power requirement 15,0 kW︱weight of the machine ca. 4,5 t︱required space 1,0 x 1,9 x 3,0 m︱

---

permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

pressure 40 t︱throat 330 mm︱stroke 250 mm︱dayligth 450 mm︱table surface area 800 x 500 mm︱hole in the table 100 mm︱table height over floor 900 mm︱ram surface 100 mm︱feed down 406 mm/sec︱feed up 393 mm/sec︱feed under pressure 14 mm/sec︱oil volume 350 l︱total power requirement 7,5 kW︱weight of the machine ca. 4,6 t︱required space 1,3 x 2,3 x 3,4 m︱

---

permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse

pressure 10 t︱throat 0 mm︱stroke 400 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6500 t︱dimensions of the machine ca. m︱

---

D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features * DUNKES CNC Control, Model 200, can be programmed with presettable parameters, e.g. Stroke, speed, forward and return motion, pressing time, etc. * Separate switch cabinet with floppy disk input. * Pendant control with monitor. * Two-handed release, in conjunction with pneumatic safety door. * A turning device for calibrating and smoothing of bores is mounted on the ram. (Calibrating mandrel moves into the bore and rotates, powered by it own motor-driven timer. Repetitions are controlled by stroke counter.)

pressure 63 t︱stroke 160 mm︱throat 280 mm︱dayligth 360 mm︱table surface area 560 x 490 mm︱table height over floor 860 mm︱ram surface 280 x 280 mm︱oil volume l︱power requirement 22,0 kW︱Weight 3,6 t︱dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm︱hole in the table 125 mm︱

---

year of manufacture1980 Modernization of control 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

pressure 2 x 6,3 t︱stroke 307 mm︱throat 180 mm︱dayligth 900 mm︱table surface area 470 x 360 mm︱die cushion capacity t︱die cushion stroke mm︱die cushion area mm︱table height over floor 810 mm︱ram surface 45 mm︱feed down 137 mm/s︱feed up 33 mm/s︱working feed 540 mm/s︱oil volume 140 l︱power requirement 3,0 kW︱Weight 1,5 t︱dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm︱

---

permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t