.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Straightening Press - Double Column

          Machinelist: Straightening Press - Double Column


          Straightening Press - Double Column

          used Presses Straightening Press - Double Column MAE Stößel


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S5224 · Straightening Press - Double Column

          MAE - Stößel - - unbekannt -

          Technical details
          pressure / t︱distance between columns / mm︱stroke / mm︱
          This ram was dismantled from the MAE HY S 315s press Data from the machine to which Ram belonged: Press pressure devi. 315,000kg pressure up Ram stroke 800 mm Projection / table depth 720 mm Installation height 800 mm Table width 1200 mm Table height 1200 mm Total height / width / depth 4200 mm / 2200 mm / 4350 mm Weight 30 tons Machine body as seen on the low loader is 4 tons It's just the pestle!!!
            pressure / t
            distance between columns / mm
            stroke / mm
            Description :
            This ram was dismantled from the MAE HY S 315s press


            Data from the machine to which Ram belonged:

            Press pressure devi. 315,000kg
            pressure up
            Ram stroke 800 mm

            Projection / table depth 720 mm
            Installation height 800 mm
            Table width 1200 mm
            Table height 1200 mm
            Total height / width / depth 4200 mm / 2200 mm / 4350 mm
            Weight 30 tons Machine body as seen on the low loader is 4 tons

            It's just the pestle!!!


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Double Column BLE A800


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06463 · Straightening Press - Double Column

          BLE - A800 - - unbekannt -

          Technical details
          pressure 800 t︱distance between columns . mm︱stroke . mm︱total power requirement . kW︱weight of the machine ca. . t︱dimensions of the machine ca. . m︱
            pressure 800 t
            distance between columns . mm
            stroke . mm
            total power requirement . kW
            weight of the machine ca. . t
            dimensions of the machine ca. . m


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Double Column LÄPPLE Sockel LC


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-2875 · Straightening Press - Double Column

          LÄPPLE - Sockel LC - - 2006 - Siemens Simatic S7 400

          Technical details
          pressure 50 t︱distance between columns 2700 mm︱stroke 800 mm︱measuring system Absolutwertgeber ︱control Siemens Simatic S7 400 ︱table length 2500 mm︱table width 1600 mm︱ 150 ︱table height 1320 mm︱work height max. 1580 mm︱ 800 ︱total power requirement 15 kW︱
          Tool clamping upper and lower part: screwed manual tool change
            pressure 50 t
            distance between columns 2700 mm
            stroke 800 mm
            measuring system Absolutwertgeber
            control Siemens Simatic S7 400
            table length 2500 mm
            table width 1600 mm
            150
            table height 1320 mm
            work height max. 1580 mm
            800
            total power requirement 15 kW
            Description :
            Tool clamping upper and lower part: screwed
            manual tool change


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Double Column JENNY RZ- 205-3-600


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-329411b · Straightening Press - Double Column

          JENNY - RZ- 205-3-600 - - 1990 -

          Technical details
          pressure 3 t︱throat 0 mm︱stroke 200 mm︱total power requirement 15 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. m︱
          Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)
            pressure 3 t
            stroke 200 mm
            total power requirement 15 kW
            weight of the machine ca. 4 t
            Description :
            Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Double Column MAE ADSF 10 RH


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-547992 · Straightening Press - Double Column

          MAE - ADSF 10 RH - - 1984 -

          Technical details
          pressure 10 t︱distance between columns 500 mm︱stroke 200 mm︱total power requirement 10 kW︱weight of the machine ca. 4.500 kg︱dimensions of the machine ca. m︱
            pressure 10 t
            distance between columns 500 mm
            stroke 200 mm
            total power requirement 10 kW
            weight of the machine ca. 4.500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Double Column MAE ADS 16 RH


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2062 · Straightening Press - Double Column

          MAE - ADS 16 RH - - 1980 -

          Technical details
          pressure 16 t︱distance between columns 1450 mm︱stroke 250 mm︱centre distance 1000 mm︱total power requirement 11 kW︱weight of the machine ca. 7,6 t︱dimensions of the machine ca. m︱
          Fully automatically straightening press Transport Equipment chain band for 110 Tools stroke convoyer inside of the machine filling measuring control sorting out Equipment digital readout switchable
            pressure 16 t
            distance between columns 1450 mm
            stroke 250 mm
            centre distance 1000 mm
            total power requirement 11 kW
            weight of the machine ca. 7,6 t
            Description :
            Fully automatically straightening press
            Transport Equipment
            chain band for 110 Tools
            stroke convoyer inside of the machine
            filling measuring control
            sorting out Equipment
            digital readout switchable


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Double Column HIDROLIKSAN HSPS 500


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69721 · Straightening Press - Double Column

          HIDROLIKSAN - HSPS 500 - - -Neu- -

          Technical details
          pressure 500 t︱column daylight 2600 mm︱stroke 800 mm︱table surface area 6000 x 3000 mm︱ max. 800 mm︱adjustment of press crosshead 5200 mm︱slide adjustment -horizontal 1800 mm︱Capacity 162 l/min︱feed down 9 mm/sec︱feed up 14 mm/sec︱total power requirement 45 kW︱weight of the machine ca. 50 t︱
          - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC
            pressure 500 t
            column daylight 2600 mm
            stroke 800 mm
            table surface area 6000 x 3000 mm
            max. 800 mm
            adjustment of press crosshead 5200 mm
            slide adjustment -horizontal 1800 mm
            Capacity 162 l/min
            feed down 9 mm/sec
            feed up 14 mm/sec
            total power requirement 45 kW
            weight of the machine ca. 50 t
            Description :
            - Hydraulics : Rexroth
            - Controls : Tailor
            - Cylinder chromed
            - Operation via remote control & joystick
            - Stroke length adjustable via sensors
            - Pressure adjustable via PLC


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Double Column HIDROLIKSAN HSPS 300


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69720 · Straightening Press - Double Column

          HIDROLIKSAN - HSPS 300 - - -Neu- -

          Technical details
          pressure 300 t︱working feed 9 / 14 mm/sec︱stroke 600 mm︱column daylight 1550 mm︱ 600 ︱adjustment of press crosshead 1500 mm︱slide adjustment -horizontal 3000 mm︱tank capacity l︱feed speeds 9 mm/sec︱return speed 14 mm/sec︱total power requirement 18,5 kW︱weight of the machine ca. 35 t︱
          - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC Price on request
            pressure 300 t
            working feed 9 / 14 mm/sec
            stroke 600 mm
            column daylight 1550 mm
            600
            adjustment of press crosshead 1500 mm
            slide adjustment -horizontal 3000 mm
            feed speeds 9 mm/sec
            return speed 14 mm/sec
            total power requirement 18,5 kW
            weight of the machine ca. 35 t
            Description :
            - Hydraulics : Rexroth
            - Controls : Tailor
            - Cylinder chromed
            - Operation via remote control & joystick
            - Stroke length adjustable via sensors
            - Pressure adjustable via PLC

            Price on request


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Double Column ARNOLD 3PP100


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-50007 · Straightening Press - Double Column

          ARNOLD - 3PP100 - - -

          Technical details
          pressure 100 t︱distance between columns / mm︱stroke / mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Rail press ARNOLD, with feed rollers
            pressure 100 t
            distance between columns / mm
            stroke / mm
            Description :
            Rail press ARNOLD, with feed rollers


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact

          Tryout Press - hydraulic

          used Presses Tryout Press - hydraulic PROFIPRESS 200T M/H-M/C2-1500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00609 · Tryout Press - hydraulic

          PROFIPRESS - 200T M/H-M/C2-1500 - - neu / new -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area 1500 x 560 mm︱feed down 9,2 mm/sec︱feed up 12,3 mm/sec︱feed under pressure 2,7 mm/sec︱column daylight 1500 mm︱total power requirement 4 kW︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • moveable pressure cylinder, • extended version, • additional manual pump, • CE,
            pressure 200 t
            stroke 400 mm
            table surface area 1500 x 560 mm
            feed down 9,2 mm/sec
            feed up 12,3 mm/sec
            feed under pressure 2,7 mm/sec
            column daylight 1500 mm
            total power requirement 4 kW
            weight of the machine ca. 1,7 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • moveable pressure cylinder,
            • extended version,
            • additional manual pump,
            • CE,


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 160T M/H-M/C2 - 1500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00611 · Tryout Press - hydraulic

          PROFIPRESS - 160T M/H-M/C2 - 1500 - - neu / new -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 1500 x 560 mm︱feed down 9,2 mm/sec︱feed up 12,3 mm/sec︱feed under pressure 2,7 mm/sec︱column daylight 1500 mm︱total power requirement 4 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • movable cylinder, • extended version, • additionally with manual pump, • CE signed
            pressure 160 t
            stroke 400 mm
            table surface area 1500 x 560 mm
            feed down 9,2 mm/sec
            feed up 12,3 mm/sec
            feed under pressure 2,7 mm/sec
            column daylight 1500 mm
            total power requirement 4 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • movable cylinder,
            • extended version,
            • additionally with manual pump,
            • CE signed


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 30M/H-2


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010023 · Tryout Press - hydraulic

          PROFIPRESS - 30M/H-2 - - neu -

          Technical details
          pressure 30 t︱stroke 400 mm︱table surface area 700 x 445 mm︱pressing speed 2,6 mm/sec︱feed speeds 9,9 mm/sec︱return speed 12,1 mm/sec︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 30 t
            stroke 400 mm
            table surface area 700 x 445 mm
            pressing speed 2,6 mm/sec
            feed speeds 9,9 mm/sec
            return speed 12,1 mm/sec
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 15H


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00608 · Tryout Press - hydraulic

          PROFIPRESS - 15H - - neu -

          Technical details
          pressure 15 t︱stroke 150 mm︱table surface area 500 x 150 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 15 t
            stroke 150 mm
            table surface area 500 x 150 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 30H


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00617 · Tryout Press - hydraulic

          PROFIPRESS - 30H - - neu -

          Technical details
          pressure 30 t︱stroke 220 mm︱table surface area 560 x 230 mm︱total power requirement / kW︱weight of the machine ca. 0,21 t︱dimensions of the machine ca. 1 x 0,7 x 2 m︱
          • Work shop press with manual pump
            pressure 30 t
            stroke 220 mm
            table surface area 560 x 230 mm
            total power requirement / kW
            weight of the machine ca. 0,21 t
            dimensions of the machine ca. 1 x 0,7 x 2 m
            Description :
            • Work shop press with manual pump


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 160TON M/H-M/C 1


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00612 · Tryout Press - hydraulic

          PROFIPRESS - 160TON M/H-M/C 1 - - neu -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 920 x 560 mm︱feed down 4,8 mm/sec︱feed up 6,4 mm/sec︱total power requirement 4 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,7 x 0,9 x 2,1 m︱
          • Pressure cylinder moveable • Reduction price by fixed cylinder: € 410,-, • Surcharge for 2 speeds: € 600,-
            pressure 160 t
            stroke 400 mm
            table surface area 920 x 560 mm
            feed down 4,8 mm/sec
            feed up 6,4 mm/sec
            total power requirement 4 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,7 x 0,9 x 2,1 m
            Description :
            • Pressure cylinder moveable
            • Reduction price by fixed cylinder: € 410,-,
            • Surcharge for 2 speeds: € 600,-


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic METALLKRAFT WPP 20 BK


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370020 · Tryout Press - hydraulic

          METALLKRAFT - WPP 20 BK - - NEU -

          Technical details
          pressure 20 t︱stroke 160 mm︱table surface area 690 x 950 x 180 mm︱weight of the machine ca. 210 kg︱dimensions of the machine ca. 1010 x 650 x 1750 mm︱
            pressure 20 t
            stroke 160 mm
            table surface area 690 x 950 x 180 mm
            weight of the machine ca. 210 kg
            dimensions of the machine ca. 1010 x 650 x 1750 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030195 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 30 - - Neu -

          Technical details
          30 to︱stroke 400 mm︱column daylight 740 mm︱ 300 mm︱total power requirement 2,2 kW︱weight of the machine ca. 600 kg︱dimensions 1200x800x2100 mm︱
          Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark
            30 to
            stroke 400 mm
            column daylight 740 mm
            300 mm
            total power requirement 2,2 kW
            weight of the machine ca. 600 kg
            dimensions 1200x800x2100 mm
            Description :
            Further information:
            stable welded construction
            Printing cylinder adjustable
            Operation electrically via shift lever / manually via hand lever
            Pressure display by manometer
            Height of material supports adjustable by cylinder
            CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 80


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030078 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 80 - - Neu -

          Technical details
          pressure 80 t︱stroke 400 mm︱column daylight 920 mm︱Frame Width 300 mm︱total power requirement 3,0 kW︱tank capacity 31 l︱ 5,4 mm/s︱ 8,3 mm/s︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1600x580x2550 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark
            pressure 80 t
            stroke 400 mm
            column daylight 920 mm
            Frame Width 300 mm
            total power requirement 3,0 kW
            tank capacity 31 l
            5,4 mm/s
            8,3 mm/s
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 1600x580x2550 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via lever / manual over hand lever
            - Pressure gauge via pressure gauge
            - Material supports per cylinder in the height adjustable
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 100


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030075 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 100 - - Neu -

          Technical details
          pressure 100 t︱stroke 400 mm︱table surface area 920 x 560 mm︱dayligth 900 mm︱distance between columns 300 mm︱total power requirement 4,0 kW︱weight of the machine ca. 1000 kg︱dimensions of the machine ca. 1700 x 900 x 2500 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark
            pressure 100 t
            stroke 400 mm
            table surface area 920 x 560 mm
            dayligth 900 mm
            distance between columns 300 mm
            total power requirement 4,0 kW
            weight of the machine ca. 1000 kg
            dimensions of the machine ca. 1700 x 900 x 2500 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via selector lever / manually via hand lever
            - Pressure gauge via pressure gauge
            - Material requirements - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 60 T / M-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370016 · Tryout Press - hydraulic

          RHTC - 60 T / M-2 - - NEU -

          Technical details
          pressure 60 t︱stroke 380 mm︱table surface area Arbeitsbreite 750 mm︱pressure 259 bar︱oil volume 38 dm³︱ajustment speed 2,87 mm/sec︱work speed 9,5 mm/sec︱return speed 12 mm/sec︱total power requirement 2,2 kW︱weight of the machine ca. 540 kg︱
          Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.
            pressure 60 t
            stroke 380 mm
            table surface area Arbeitsbreite 750 mm
            pressure 259 bar
            oil volume 38 dm³
            ajustment speed 2,87 mm/sec
            work speed 9,5 mm/sec
            return speed 12 mm/sec
            total power requirement 2,2 kW
            weight of the machine ca. 540 kg
            Description :
            Inner diameter of the cylinder [mm]: 170
            Piston rod diameter [mm]: 75
            Diameter piston crown [mm]: 100

            - Integrated pressure gauge
            - Pressure regulator
            - Hydraulic unit with 2 speeds
            - Working table adjustable in height
            - Joystick to move the piston up / down

            The 60 ton workshop press has a fixed cylinder and a
            height-adjustable work table (motorized). Equipped with
            Pressure regulation, manometer, 2 speeds and a joystick for the
            move the piston up and down. With this joystick you can use the piston precisely
            move, making this hydraulic press perfect for precision jobs
            suitable.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 100 T / M/H-M/C-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370017 · Tryout Press - hydraulic

          RHTC - 100 T / M/H-M/C-2 - - NEU -

          Technical details
          pressure 100 t︱stroke 380 mm︱table surface area Arbeitsbreite 1100 mm︱pressure 258 bar︱oil volume 46 dm³︱ajustment speed 7,54 mm/sec︱work speed 2,47 mm/sec︱return speed 9,06 mm/sec︱total power requirement 2,2 kW︱weight of the machine ca. 970 kg︱
          Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.
            pressure 100 t
            stroke 380 mm
            table surface area Arbeitsbreite 1100 mm
            pressure 258 bar
            oil volume 46 dm³
            ajustment speed 7,54 mm/sec
            work speed 2,47 mm/sec
            return speed 9,06 mm/sec
            total power requirement 2,2 kW
            weight of the machine ca. 970 kg
            Description :
            Inner diameter of the cylinder [mm]: 220
            Piston rod diameter [mm]: 90
            Diameter piston crown [mm]: 120

            - Movable cylinder (left-right)
            - Integrated pressure gauge
            - Pressure regulator
            - Two-speed hydraulic unit
            - Working table adjustable in height
            - Joystick to move the piston up / down
            - Hand pump for precision work

            The 100 ton hydraulic press is equipped with a movable cylinder (left-
            right) and a height-adjustable work table. Over and beyond
            it has a pressure regulation, 2 speeds, a joystick and
            a hand pump for precision pressing.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 120


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030079 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 120 - - Neu -

          Technical details
          pressure 120 t︱stroke 400 mm︱Frame Width 400 mm︱distance spindle /table max. 900 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1300 kg︱dimensions of the machine ca. 1620 x 900 x 2450 mm︱
            pressure 120 t
            stroke 400 mm
            Frame Width 400 mm
            distance spindle /table max. 900 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1300 kg
            dimensions of the machine ca. 1620 x 900 x 2450 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 200 ton M/H-M/C-2 D=1300


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370019 · Tryout Press - hydraulic

          RHTC - 200 ton M/H-M/C-2 D=1300 - - NEU -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area Arbeitsbreite 1300 mm︱pressure 243 bar︱oil volume 64 dm³︱ajustment speed 5,73 mm/sec︱work speed 1,84 mm/sec︱return speed 7,08 mm/sec︱total power requirement 3,0 kW︱weight of the machine ca. 1690 kg︱
          Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.
            pressure 200 t
            stroke 400 mm
            table surface area Arbeitsbreite 1300 mm
            pressure 243 bar
            oil volume 64 dm³
            ajustment speed 5,73 mm/sec
            work speed 1,84 mm/sec
            return speed 7,08 mm/sec
            total power requirement 3,0 kW
            weight of the machine ca. 1690 kg
            Description :
            Inner diameter of the cylinder [mm]: 320
            Piston rod diameter [mm]: 140
            Diameter piston crown [mm]: 175

            - adjustable cylinder (left-right)
            - Integrated pressure gauge
            - Pressure regulator
            - Two-speed hydraulic unit
            - Working table adjustable in height
            - Joystick to move the piston up / down
            - Hand pump for precision work
            - with digital display

            This 200 ton hydraulic press is equipped with a movable cylinder (left-
            right), a height-adjustable work table, a pressure regulator, 2
            speeds, a joystick and a hand pump for precision pressing
            fitted.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030139 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 160 - - Neu -

          Technical details
          pressure 160 t︱stroke 400 mm︱Frame Width 350 mm︱column daylight 1.100 mm︱cylinder diameter 120 mm︱work height max. 900 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1.400 kg︱dimensions of the machine ca. 1800x1000x2550 mm︱
          Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark
            pressure 160 t
            stroke 400 mm
            Frame Width 350 mm
            column daylight 1.100 mm
            cylinder diameter 120 mm
            work height max. 900 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1.400 kg
            dimensions of the machine ca. 1800x1000x2550 mm
            Description :
            Accessories / equipment:
            - stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via selector lever / manually via hand lever
            - Pressure gauge via pressure gauge
            - Material supports adjustable in height by cylinder
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          MAE - HIDROLIKSAN - LÄPPLE - JENNY - ARNOLD - BLE -