.
Avrupa stok makineleri satıcıları ağı
+ 49 (0) 2389 5299080
Arama servisi Kullanılmış makineleri sat

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:
             Görünüm: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2020

          Coil Line

          Machinelist: Coil Line

          Coil Line

          used Sheet metal working / shaeres / bending Coil Line IRON / RDI Group CRM-20

          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland
          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-0843 · Coil Line

          IRON / RDI Group - CRM-20 - - unbekannt -

          Technical details
          sheet width - mm︱coil outside dia. - mm︱weight max. in kg - kg︱total power requirement 2,2 kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          Coil - Durchlauf / Blechvorschub Drive: 2,2
            sheet width - mm
            coil outside dia. - mm
            weight max. in kg - kg
            total power requirement 2,2 kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            Coil - Durchlauf / Blechvorschub




            Drive: 2,2


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line HS-AUTOMATION MS 4000 / MR 58

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60165 · Coil Line

          HS-AUTOMATION - MS 4000 / MR 58 - - 2009 -

          Technical details
          sheet width 0600 mm︱coil outside dia. 1500 mm︱weight max. in kg 4000 kg︱width of sheet max. ca. 3,60 mm︱sheet thickness - min. 0,80 mm︱diam. of the rolls ca. 80 mm︱nomb. of straightening rolls 7 ︱feed rolls 2 ︱speed 5-30 m/min︱range of expansion ca. 475-535 mm︱expansion hydraulisch ︱pinch roll hydraulisch ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at the outlet - Ultrasonic transmitter for loop control - Swivel control panel - Control Siemens S7
            sheet width 0600 mm
            coil outside dia. 1500 mm
            weight max. in kg 4000 kg
            width of sheet max. ca. 3,60 mm
            sheet thickness - min. 0,80 mm
            diam. of the rolls ca. 80 mm
            nomb. of straightening rolls 7
            feed rolls 2
            speed 5-30 m/min
            range of expansion ca. 475-535 mm
            expansion hydraulisch
            pinch roll hydraulisch
            Description :
            Decoiler type MS 4000
            - Hydraulic spreading
            - Hydraulic pressure roller from above
            - Swivel-in limit roller at the front, contact disc at the rear
            - Auxiliary drive
            - Reel movable
            - Coil lifting table

            Straightening machine type MR 58

            Rollers hardened and ground.
            - Pneumatically ventilated feed roller
            - Straightening rollers adjustable as a block
            - Lateral belt guidance at the inlet
            - Hydraulic band insertion aid
            - Straightening head can be opened
            - Large roll basket and transfer table at the outlet
            - Ultrasonic transmitter for loop control
            - Swivel control panel
            - Control Siemens S7


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line ARKU AH 3000/2/250/ST / RM 3025.4/2

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60174 · Coil Line

          ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 -

          Technical details
          sheet width 0250 mm︱coil outside dia. 1800 mm︱weight max. in kg 2 x 3000 kg︱ 3,80 mm︱ 470 - 530 mm︱ 21 ︱ 30 mm︱ 4 ︱ 18,0 kW︱speed 20 m/min︱power capacity 18 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm
            sheet width 0250 mm
            coil outside dia. 1800 mm
            weight max. in kg 2 x 3000 kg
            3,80 mm
            470 - 530 mm
            21
            30 mm
            4
            18,0 kW
            speed 20 m/min
            power capacity 18 kW
            Description :
            Decoiler AH 3000/2/250/ST
            with continuously variable drive, hydraulic central spread,
            Automatic post-spreading system, hydraulic pressure device, hydraulic swivel,

            Straightening machine RM 3025.4/21
            with continuously variable drive, driven straightening rollers, manual
            Roller mill adjustment, quick-change device for the straightening rollers
            Belt loop control via ultrasound
            Material thickness / with material width 3.80 / 250 mm
            Material thickness / with material width 6.00 / 100 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line DIMECO 2371 E-FPS /1676 C-VV

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60178 · Coil Line

          DIMECO - 2371 E-FPS /1676 C-VV - - 2000/2006 -

          Technical details
          sheet width 0400 mm︱coil outside dia. 1400 mm︱weight max. in kg 3000 kg︱plate thickness 0,80 - 4,50 mm︱nomb. of straightening rolls 7 ︱diam. of the rolls ca. 80 mm︱feed rolls 2 ︱exit pinch rolls 2 ︱coil width 600 mm︱range of expansion ca. 470 - 530 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table
            sheet width 0400 mm
            coil outside dia. 1400 mm
            weight max. in kg 3000 kg
            plate thickness 0,80 - 4,50 mm
            nomb. of straightening rolls 7
            diam. of the rolls ca. 80 mm
            feed rolls 2
            exit pinch rolls 2
            coil width 600 mm
            range of expansion ca. 470 - 530 mm
            Description :
            Decoiler DIMECO type 2371 E-FPS
            Year of construction 2006
            with hydraulic spreading
            with pneumatic pressure roller from above
            with 6 pieces of band limiting arms

            Straightening machine DIMECO type 1676 C-VV
            Year of construction 2000
            with frequency-controlled drive
            with hydraulic band insertion aid with support table, insertion tongue,
            Pressing arm from above
            with pneumatically ventilated roller
            with side belt guide rollers
            with pneumatically adjustable belt transfer table


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line DREHER 1676D-FQ/2380 D-FPS

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60157 · Coil Line

          DREHER - 1676D-FQ/2380 D-FPS - - 1999/97/2012 Umbau -

          Technical details
          sheet width 0500 mm︱coil outside dia. 1400 mm︱weight max. in kg 4000 kg︱plate thickness 0,80 - 3,60 mm︱diam. of the rolls ca. 80 mm︱feed rolls 2 ︱nomb. of straightening rolls 7 ︱exit pinch rolls 2 ︱speed 5-30 m/min︱range of expansion ca. 445 - 530 mm︱expansion manuell ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket
            sheet width 0500 mm
            coil outside dia. 1400 mm
            weight max. in kg 4000 kg
            plate thickness 0,80 - 3,60 mm
            diam. of the rolls ca. 80 mm
            feed rolls 2
            nomb. of straightening rolls 7
            exit pinch rolls 2
            speed 5-30 m/min
            range of expansion ca. 445 - 530 mm
            expansion manuell
            Description :
            Control conversion to SIEMENS S7 in 2012

            - pneumatic pressure roller on the side
            - pneumatically ventilated feed roller
            - Straightening rollers manually adjustable
            - lateral belt guide at the inlet
            - Large roller basket at the outlet
            - Ultrasonic transmitter for loop control
            - Roller feed type 1125 D
            - Bandwidth max. 510 mm
            - Band thickness max. 6 mm with full width 5.50 mm
            - Roll diameter 125mm
            - Feed speed: max. 100 m/min.
            - pneumatically ventilated top roller
            - Lateral tape guide with digital display
            - Inlet roller basket


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line AMT AHR 1,5

          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland
          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15438 · Coil Line

          AMT - AHR 1,5 - - 1999 -

          Technical details
          sheet width 400 mm︱coil outside dia. 1200 mm︱weight max. in kg 1500 kg︱
            sheet width 400 mm
            coil outside dia. 1200 mm
            weight max. in kg 1500 kg


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 30.400/9-2000.2H

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60167 · Coil Line

          KOHLER - 30.400/9-2000.2H - - 1995 -

          Technical details
          sheet width 0400 mm︱coil outside dia. 460 - 530 mm︱weight max. in kg 2 x 2000 kg︱plate thickness 0,40 - 3,00 mm︱coil outside - diam. ca. 1500 mm︱nomb. of straightening rolls 9 ︱diam. of the rolls ca. 30 mm︱speed 0-40 m/min︱total power requirement 15 kW︱weight of the machine ca. 5,20 t︱dimensions of the machine ca. m︱
          - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound
            sheet width 0400 mm
            coil outside dia. 460 - 530 mm
            weight max. in kg 2 x 2000 kg
            plate thickness 0,40 - 3,00 mm
            coil outside - diam. ca. 1500 mm
            nomb. of straightening rolls 9
            diam. of the rolls ca. 30 mm
            speed 0-40 m/min
            total power requirement 15 kW
            weight of the machine ca. 5,20 t
            Description :
            - straightening machine type KRE 30.400/9
            with infinitely variable drive, motoric adjustment of the roller cassette,
            rapid clamping device
            - double decoiler type 2000.2 H
            with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll
            - coil loop control via ultrasound


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line COVEMA/SCHWABE VRMA32/96-MHM 2

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60173 · Coil Line

          COVEMA/SCHWABE - VRMA32/96-MHM 2 - - 1994 -

          Technical details
          sheet width 0320 mm︱coil outside dia. 1650 mm︱weight max. in kg 2000 kg︱width of the decoiler 400 mm︱coil inside-diam. ca. 350 - 460 mm︱diam. of the rolls ca. 40 mm︱nomb. of straightening rolls 7 ︱sheet thickness - max. 2,00 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          COVEMA-SCHWABE belt system consisting of: Reel MHM 2 - hydraulic expansion (motor 1.5kW/1500 U) - hydraulic pressure roller - with drive Feed leveling machine VRMA 32/96 The straightening head can be opened using hydraulics Intermediate ventilation with operating instructions with control panel
            sheet width 0320 mm
            coil outside dia. 1650 mm
            weight max. in kg 2000 kg
            width of the decoiler 400 mm
            coil inside-diam. ca. 350 - 460 mm
            diam. of the rolls ca. 40 mm
            nomb. of straightening rolls 7
            sheet thickness - max. 2,00 mm
            Description :
            COVEMA-SCHWABE belt system consisting of:

            Reel MHM 2
            - hydraulic expansion (motor 1.5kW/1500 U)
            - hydraulic pressure roller
            - with drive

            Feed leveling machine VRMA 32/96

            The straightening head can be opened using hydraulics
            Intermediate ventilation

            with operating instructions
            with control panel


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 18.260.19-1000.2

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60163 · Coil Line

          KOHLER - 18.260.19-1000.2 - - 1991/2023CHECK -

          Technical details
          sheet width 0260 mm︱coil outside dia. 1200 mm︱weight max. in kg 2 x 1000 kg︱sheet thickness - max. 2,00 mm︱nomb. of straightening rolls 19 ︱diam. of the rolls ca. 18 mm︱speed 0-60 m/min︱run-in height 1200-1400 mm︱sheet thickness - min. 0,30 mm︱working direction left - right ja/yes ︱range of expansion ca. 360 - 430 + 460 - 530 mm︱total power requirement 13 kW︱weight of the machine ca. 2,50 t︱dimensions of the machine ca. 5,50 x 1,80 x 2,10 m︱
          - Speed control ultrasonic via belt loop - Digital measuring device - Motorized roller mill adjustment - Drive motor 8 kW - Hydraulic reel expansion - Pneumatic reel brake - Quick change device for the straightening rollers and support rollers - SIEMENS S5 control - Press inlet height 1200-1400 mm - Electrical plans in the control cabinet - Instruction manual available Dimensions: - Straightener with reel 3.00 x 1.80 x 2.10 m - Tape guide 1.50 x 0.50 x 1.40 m - Control cabinet 0.90 x 0.60 x 2.10 m The system is energized and can be tested with material.
            sheet width 0260 mm
            coil outside dia. 1200 mm
            weight max. in kg 2 x 1000 kg
            sheet thickness - max. 2,00 mm
            nomb. of straightening rolls 19
            diam. of the rolls ca. 18 mm
            speed 0-60 m/min
            run-in height 1200-1400 mm
            sheet thickness - min. 0,30 mm
            working direction left - right ja/yes
            range of expansion ca. 360 - 430 + 460 - 530 mm
            total power requirement 13 kW
            weight of the machine ca. 2,50 t
            dimensions of the machine ca. 5,50 x 1,80 x 2,10 m
            Description :
            - Speed control ultrasonic via belt loop
            - Digital measuring device
            - Motorized roller mill adjustment
            - Drive motor 8 kW
            - Hydraulic reel expansion
            - Pneumatic reel brake
            - Quick change device for the straightening rollers and support rollers
            - SIEMENS S5 control
            - Press inlet height 1200-1400 mm
            - Electrical plans in the control cabinet
            - Instruction manual available

            Dimensions:
            - Straightener with reel 3.00 x 1.80 x 2.10 m
            - Tape guide 1.50 x 0.50 x 1.40 m
            - Control cabinet 0.90 x 0.60 x 2.10 m

            The system is energized and can be tested with material.


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line WANZKE HRS 500/2500

          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland
          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0346 · Coil Line

          WANZKE - HRS 500/2500 - - 1990 -

          Technical details
          Coil weight 2,5 t︱Material width 50 - 500 mm︱Coil exterior diameter 1400 mm︱Expansion range 420 - 520 mm︱Material width 500 mm︱Number of levelling rolls 9 Stk.︱Diameter of the levelling rolls 50 mm︱Number of pinch rolls 2 Stk.︱Material thickness 6 mm︱Feeding speed 6 - 24 m / min︱
            Coil weight 2,5 t
            Material width 50 - 500 mm
            Coil exterior diameter 1400 mm
            Expansion range 420 - 520 mm
            Material width 500 mm
            Number of levelling rolls 9 Stk.
            Diameter of the levelling rolls 50 mm
            Number of pinch rolls 2 Stk.
            Material thickness 6 mm
            Feeding speed 6 - 24 m / min


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 150.2/150.1

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-633 · Coil Line

          KOHLER - 150.2/150.1 - - 1989 -

          Technical details
          sheet width 100 mm︱coil outside dia. 800 mm︱weight max. in kg 150 kg︱speed 0 - 60 m/min︱total power requirement 2 kW︱weight of the machine ca. t︱dimensions of the machine ca. 2,89 x 1,38 x 1,4 m︱ 2 x 150 kg︱band width 100 mm︱ diameter of the mandrel min. 170 max. 540 mm︱
          -Coil rewinding system with 3 single coils decoiler, type 150.2: -Spool width: 140mm -Spreading: manual bolt spreading -Spool outer diameter: 800 mm -Brake: disc brake pneu. -Side shift: manually via spindle winding reel, type 150.1: -Brake: engine brake -Side shift: manual via spindle
            sheet width 100 mm
            coil outside dia. 800 mm
            weight max. in kg 150 kg
            speed 0 - 60 m/min
            total power requirement 2 kW
            dimensions of the machine ca. 2,89 x 1,38 x 1,4 m
            2 x 150 kg
            band width 100 mm
            diameter of the mandrel min. 170 max. 540 mm
            Description :
            -Coil rewinding system with 3 single coils decoiler, type 150.2:
            -Spool width: 140mm
            -Spreading: manual bolt spreading
            -Spool outer diameter: 800 mm
            -Brake: disc brake pneu.
            -Side shift: manually via spindle winding reel, type 150.1:

            -Brake: engine brake
            -Side shift: manual via spindle


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 10 120 - 300.2

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60159 · Coil Line

          KOHLER - 10 120 - 300.2 - - 1979 -

          Technical details
          sheet width 0120 mm︱coil outside dia. 1200 mm︱weight max. in kg 300 kg︱sheet thickness - max. 1,00 mm︱diam. of the rolls ca. 10 mm︱nomb. of straightening rolls 16 ︱ diameter of the mandrel 350 - 530 mm︱total power requirement 5,50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank
            sheet width 0120 mm
            coil outside dia. 1200 mm
            weight max. in kg 300 kg
            sheet thickness - max. 1,00 mm
            diam. of the rolls ca. 10 mm
            nomb. of straightening rolls 16
            diameter of the mandrel 350 - 530 mm
            total power requirement 5,50 kW
            Description :
            - Reel and straightener as a combination with a common frame
            - Manually adjustable reel brake
            - Coil limiting ring at the front, fixed washer at the rear
            - Reel can be moved manually laterally
            - manual reel spreading
            - side belt – guide rollers with central adjustment at the inlet
            - manual block adjustment of the straightening mechanism, display via dial
            gauges
            - Oil - central lubrication
            - Loop control via sensor
            - Speed adjustable via potentiometer
            - Manually adjustable hold-down roller at the inlet
            - Large roller basket with cover on the outlet
            - Free-standing control panel
            - Lateral adjustment of the reel using a hand crank


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coil Line KOHLER 12 120 -150.2

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60158 · Coil Line

          KOHLER - 12 120 -150.2 - - 1979 -

          Technical details
          sheet width 0120 mm︱coil outside dia. 800 mm︱weight max. in kg 150 kg︱plate thickness 1,50 mm︱diam. of the rolls ca. 12 mm︱nomb. of straightening rolls 16 ︱ diameter of the mandrel 180 - 550 mm︱total power requirement 5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet
            sheet width 0120 mm
            coil outside dia. 800 mm
            weight max. in kg 150 kg
            plate thickness 1,50 mm
            diam. of the rolls ca. 12 mm
            nomb. of straightening rolls 16
            diameter of the mandrel 180 - 550 mm
            total power requirement 5 kW
            Description :
            - Reel and straightener as a combination with a common frame
            - Manually adjustable reel brake
            - Coil limiting ring at the front, fixed washer at the rear
            - Reel can be moved manually laterally
            - manual reel spreading
            - side belt – guide rollers with central adjustment at the inlet
            - manual block adjustment of the straightening mechanism, display via dial
            gauges
            - Oil - central lubrication
            - Loop control via sensor
            - Speed adjustable via potentiometer
            - Belt support at the outlet
            - Free-standing control panel
            - Lateral adjustment of the reel using a hand crank
            - Belt support at the outlet


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN UNBEKANNT

          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland
          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1149 · Plate Shear - Hydraulic

          SAFAN - UNBEKANNT - - unbekannt -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱distance between columns / mm︱
            sheet width 3000 mm
            plate thickness 6 mm
            distance between columns / mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6 HH MONO

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010991 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 HH MONO - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱total power requirement 11 kW︱weight of the machine ca. 6.300 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine u. Control in German Special equipment: - pneumatic sheet holding device (monoblock)
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            total power requirement 11 kW
            weight of the machine ca. 6.300 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Equipment:
            - CNC electr. / hydraulic swing cut shears
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Quantity
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. can be folded up at max. Traverse path, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball casters in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine u. Control in German

            Special equipment:
            - pneumatic sheet holding device (monoblock)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA HTBS BASIC

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011089 · Plate Shear - Hydraulic

          FARINA - HTBS BASIC - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 10 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱weight of the machine ca. 10500 kg︱
          Equipment/accessories: - CYBELEC Cybtouch touchscreen controller - NC controller for backgauge preselection, cutting gap adjustment, number of pieces, cutting length and material preselection - Sheet holding device - 1 side stop with scale, T-slot and tilting cam - 2 front support arms - Cutting line lighting - Cutting gap adjustment - Cutting length limiter - Hinged finger guard with limit switch - Motorized backgauge 1,000 mm travel - recirculating ball screws - Ball rollers in the table - foot switch
            sheet width 3060 mm
            plate thickness 10 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            weight of the machine ca. 10500 kg
            Description :
            Equipment/accessories:
            - CYBELEC Cybtouch touchscreen controller
            - NC controller for backgauge preselection, cutting gap adjustment, number of
            pieces,
            cutting length and material preselection
            - Sheet holding device
            - 1 side stop with scale, T-slot and tilting cam
            - 2 front support arms
            - Cutting line lighting
            - Cutting gap adjustment
            - Cutting length limiter
            - Hinged finger guard with limit switch
            - Motorized backgauge 1,000 mm travel
            - recirculating ball screws
            - Ball rollers in the table
            - foot switch


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010523 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 - - Neu - CYBELEC CybTouch 8

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱control CYBELEC CybTouch 8 ︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            control CYBELEC CybTouch 8
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 2100 x 4,0

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011176 · Plate Shear - Hydraulic

          FARINA - CFM 2100 x 4,0 - - NEU -

          Technical details
          sheet width 2040 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱total power requirement 7,5 kW︱rear stop 750 mm︱weight of the machine ca. 2600 kg︱dimensions 2810 x 2230 x 1360 mm︱
            sheet width 2040 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            total power requirement 7,5 kW
            rear stop 750 mm
            weight of the machine ca. 2600 kg
            dimensions 2810 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10 HH MONO

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011046 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 HH MONO - - Neu -

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x13

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010788 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x13 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 13 mm︱thickness at "Niro-steel" 8 mm︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 2,0° °︱total power requirement 22 kW︱voltage 380 V︱no. of strokes 11 Hub/min︱weight of the machine ca. 12.100 kg︱dimensions of the machine ca. 4000x2240x2235 mm︱
          Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German
            sheet width 3100 mm
            plate thickness 13 mm
            thickness at "Niro-steel" 8 mm
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 2,0° °
            total power requirement 22 kW
            voltage 380 V
            no. of strokes 11 Hub/min
            weight of the machine ca. 12.100 kg
            dimensions of the machine ca. 4000x2240x2235 mm
            Description :
            Accessories / equipment:
            - CYBELEC-CybTouch control panel with digital display for backgauge
            - hydr. Cutting gap adjustment via control
            - 1 side stop
            - 4 front lifting arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Ball rolls in the table
            - motorized back gauge 1.000 mm travel with recirculating ball screws,
               automatically start at the end of the stop
            - Shear knives for stainless steel cuts as standard
            - Photocell behind the machine
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - Operating instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010594 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱ 20 ︱total power requirement 11 kW︱weight of the machine ca. 5700 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            20
            total power requirement 11 kW
            weight of the machine ca. 5700 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Accessories / equipment:
            - CYBELEC Cybtouch touch screen controller
            - NC controller for backgauge, gap adjustment, number of pieces,
            cutting length
            - 1 side stop with scale, T-groove and tilting cam
            - 2 front support arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Folding finger guard with limit switch
            - motorized back gauge 1.000 mm travel
            - Ball screws
            - Photocell behind the machine
            - Ball rolls in the table
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - CE mark / Declaration of Conformity
            - Operating manual: Machine and control in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 1360 x 3,0

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011175 · Plate Shear - Hydraulic

          FARINA - CFM 1360 x 3,0 - - NEU -

          Technical details
          sheet width 1350 mm︱ 3 mm︱sheet thickness for stainless steel 1,5 mm︱rear stop 600 mm︱total power requirement 3 kW︱weight of the machine ca. 1150 kg︱dimensions 2030 x 1940 x 1220 mm︱
            sheet width 1350 mm
            3 mm
            sheet thickness for stainless st. 1,5 mm
            rear stop 600 mm
            total power requirement 3 kW
            weight of the machine ca. 1150 kg
            dimensions 2030 x 1940 x 1220 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA BTS 3006

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011177 · Plate Shear - Hydraulic

          FARINA - BTS 3006 - - NEU -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱0 17 St.︱total power requirement 11 kW︱quantity of oil 180 l︱weight of the machine ca. 6250 kg︱
            sheet width 3050 mm
            plate thickness 6 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            0 17 St.
            total power requirement 11 kW
            quantity of oil 180 l
            weight of the machine ca. 6250 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFMT 2560 x 4,0

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011174 · Plate Shear - Hydraulic

          FARINA - CFMT 2560 x 4,0 - - NEU -

          Technical details
          sheet width 2550 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱rear stop 750 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3050 kg︱dimensions 3300 x 2230 x 1360 mm︱
            sheet width 2550 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            rear stop 750 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3050 kg
            dimensions 3300 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   
            •
          TOP Manufacturer:

          KOHLER - ARKU - COVEMA/SCHWABE - DIMECO - DREHER - IRON / RDI GROUP - HS-AUTOMATION -

          Özet
          Software
          Kullanılan makineler içeriği
          Gizlilik
          Bizi takip edin
          © 2000-2024, Logotech oHG · Yazılım ve İnternet Hizmetleri - Tüm hakları saklıdır