.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA SB 3010 NT


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325267 · Plate Shear - Hydraulic

          DURMA - SB 3010 NT - - 2011 - ENC 100M

          Technical details
          sheet width 3100 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱no. of strokes 13 Hub/min︱cutting angle 1°50 ︱control ENC 100M ︱table width 580 mm︱throat 50,0 mm︱total power requirement 22,0 KW︱weight 9300 kg︱range L-W-H 4200 x 2250 x 2100 mm︱
          ** from a maintenance workshop ** New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears * with DURMA ENC 100M NC control * Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - Manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x side stop 1.500 mm - 2x front support arms 1.000 mm - Ball transfer units in the front support table - hinged finger guard, with safety switch - Light barrier behind the machine (safety device) - free-moving footswitch - CE mark/Declaration of Conformity
            sheet width 3100 mm
            plate thickness 10,0 mm
            thickness at "Niro-steel" 6,0 mm
            distance between columns 3120 mm
            down holder 16 Stück
            oil volume 200 ltr.
            no. of strokes 13 Hub/min
            cutting angle 1°50
            control ENC 100M
            table width 580 mm
            throat 50,0 mm
            total power requirement 22,0 KW
            weight 9300 kg
            range L-W-H 4200 x 2250 x 2100 mm
            Description :
            ** from a maintenance workshop
            ** New price ~ 55.000 euros

            --------------------------------------------------
            robust electro-hydraulic oscillating shears
            * with DURMA ENC 100M NC control
            * Manual cutting gap adjustment, via eccentric
            --------------------------------------------------

            Furnishing:
            - electro-hydraulic oscillating shears
            - with DURMA ENC 100M control
            * Backgauge preselection - X axis
            * Number of pieces
            * Cutting length limitation
            * Swivel control, left front
            - motorized backgauge, travel = 1.000 mm (X axis)
            * on ball screws
            * Travel speed 200 mm/sec.
            - Manual cutting gap adjustment, via eccentric adjustment
            - hydraulic hold-down devices
            - 1x side stop 1.500 mm
            - 2x front support arms 1.000 mm
            - Ball transfer units in the front support table
            - hinged finger guard, with safety switch
            - Light barrier behind the machine (safety device)
            - free-moving footswitch
            - CE mark/Declaration of Conformity


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA SB 3010 NT


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94084 · Plate Shear - Hydraulic

          DURMA - SB 3010 NT - - 2011 - ENC 100M

          Technical details
          sheet width 3100 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱no. of strokes 13 Hub/min︱cutting angle 1°50 ︱control ENC 100M ︱table width 580 mm︱throat 50,0 mm︱total power requirement 22,0 KW︱weight 9300 kg︱range L-W-H 4200 x 2250 x 2100 mm︱
          ** from a maintenance workshop ** New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears * with DURMA ENC 100M NC control * Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - Manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x side stop 1.500 mm - 2x front support arms 1.000 mm - Ball transfer units in the front support table - hinged finger guard, with safety switch - Light barrier behind the machine (safety device) - free-moving footswitch - CE mark/Declaration of Conformity
            sheet width 3100 mm
            plate thickness 10,00 mm
            thickness at "Niro-steel" 6,00 mm
            distance between columns 3120 mm
            down holder 16 Stück
            oil volume 200 ltr.
            no. of strokes 13 Hub/min
            cutting angle 1°50
            control ENC 100M
            table width 580 mm
            throat 50,0 mm
            total power requirement 22,0 KW
            weight 9300 kg
            range L-W-H 4200 x 2250 x 2100 mm
            Description :
            ** from a maintenance workshop
            ** New price ~ 55.000 euros

            --------------------------------------------------
            robust electro-hydraulic oscillating shears
            * with DURMA ENC 100M NC control
            * Manual cutting gap adjustment, via eccentric
            --------------------------------------------------

            Furnishing:
            - electro-hydraulic oscillating shears
            - with DURMA ENC 100M control
            * Backgauge preselection - X axis
            * Number of pieces
            * Cutting length limitation
            * Swivel control, left front
            - motorized backgauge, travel = 1.000 mm (X axis)
            * on ball screws
            * Travel speed 200 mm/sec.
            - Manual cutting gap adjustment, via eccentric adjustment
            - hydraulic hold-down devices
            - 1x side stop 1.500 mm
            - 2x front support arms 1.000 mm
            - Ball transfer units in the front support table
            - hinged finger guard, with safety switch
            - Light barrier behind the machine (safety device)
            - free-moving footswitch
            - CE mark/Declaration of Conformity


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA SB 3006 NT HH


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325330 · Plate Shear - Hydraulic

          DURMA - SB 3006 NT HH - - 2008 - ENC 100

          Technical details
          sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱cutting angle 1° 30 ︱no. of strokes 15 Hub/min︱control ENC 100 ︱table width 500 mm︱throat 50.0 mm︱Number of working hours 912 h︱total power requirement 15.0 KW︱weight 7650 kg︱range L-W-H 3810 x 2200 x 2050 mm︱
          ** from a maintenance workshop (!!) ** very good / well-maintained condition (as new) ** with only 912 operating hours ** current new price ~ 45.000 euros ** Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear * with DURMA ENC 100M control * manual cutting gap adjustment * Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA "ENC 100M" NC control unit * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * swiveling operation, left front - electro-motorized back gauge, travel = 1,000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x front side stop .. 1.500 mm - 2x front support arms .. 1.500 mm - Ball rollers in the front support table - hinged finger protection, with safety switch - Light barrier behind the machine (safety device) - 1x freely movable foot switch - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325330
            sheet width 3100 mm
            plate thickness 6.0 mm
            thickness at "Niro-steel" 4.0 mm
            distance between columns 3120 mm
            down holder 16 Stück
            oil volume 200 ltr.
            cutting angle 1° 30
            no. of strokes 15 Hub/min
            control ENC 100
            table width 500 mm
            throat 50.0 mm
            Number of working hours 912 h
            total power requirement 15.0 KW
            weight 7650 kg
            range L-W-H 3810 x 2200 x 2050 mm
            Description :
            ** from a maintenance workshop (!!)
            ** very good / well-maintained condition (as new)
            ** with only 912 operating hours
            ** current new price ~ 45.000 euros
            ** Special price on request

            --------------------------------------------------
            NC electro-hydraulic swing cutting shear
            * with DURMA ENC 100M control
            * manual cutting gap adjustment
            * Incl. pneumatic sheet metal holding device for thin sheet metal cuts
            --------------------------------------------------

            Furnishing:
            - robust electro-hydraulic swing cutting shears
            - including DURMA "ENC 100M" NC control unit
            * Backgauge preselection - X axis
            * Number of pieces
            * Cutting length limitation
            * swiveling operation, left front
            - electro-motorized back gauge, travel = 1,000 mm (X axis)
            * on ball screws
            * Travel speed 200 mm/sec.
            - manual cutting gap adjustment, via eccentric adjustment
            - hydraulic hold-down devices
            - 1x front side stop .. 1.500 mm
            - 2x front support arms .. 1.500 mm
            - Ball rollers in the front support table
            - hinged finger protection, with safety switch
            - Light barrier behind the machine (safety device)
            - 1x freely movable foot switch
            - original instruction manual

            * Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal blanks

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325330


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA SB 3006 NT HH


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94163 · Plate Shear - Hydraulic

          DURMA - SB 3006 NT HH - - 2008 - ENC 100

          Technical details
          sheet width 3100 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱cutting angle 1° 30 ︱no. of strokes 15 Hub/min︱control ENC 100 ︱table width 500 mm︱throat 50.0 mm︱Number of working hours 912 h︱total power requirement 15.0 KW︱weight 7650 kg︱range L-W-H 3810 x 2200 x 2050 mm︱
          ** from a maintenance workshop (!!) ** very good / well-maintained condition (as new) ** with only 912 operating hours ** current new price ~ 45.000 euros ** Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear * with DURMA ENC 100M control * manual cutting gap adjustment * Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA "ENC 100M" NC control unit * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * swiveling operation, left front - electro-motorized back gauge, travel = 1,000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x front side stop .. 1.500 mm - 2x front support arms .. 1.500 mm - Ball rollers in the front support table - hinged finger protection, with safety switch - Light barrier behind the machine (safety device) - 1x freely movable foot switch - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks
            sheet width 3100 mm
            plate thickness 6,00 mm
            thickness at "Niro-steel" 4,00 mm
            distance between columns 3120 mm
            down holder 16 Stück
            oil volume 200 ltr.
            cutting angle 1° 30
            no. of strokes 15 Hub/min
            control ENC 100
            table width 500 mm
            throat 50.0 mm
            Number of working hours 912 h
            total power requirement 15.0 KW
            weight 7650 kg
            range L-W-H 3810 x 2200 x 2050 mm
            Description :
            ** from a maintenance workshop (!!)
            ** very good / well-maintained condition (as new)
            ** with only 912 operating hours
            ** current new price ~ 45.000 euros
            ** Special price on request

            --------------------------------------------------
            NC electro-hydraulic swing cutting shear
            * with DURMA ENC 100M control
            * manual cutting gap adjustment
            * Incl. pneumatic sheet metal holding device for thin sheet metal cuts
            --------------------------------------------------

            Furnishing:
            - robust electro-hydraulic swing cutting shears
            - including DURMA "ENC 100M" NC control unit
            * Backgauge preselection - X axis
            * Number of pieces
            * Cutting length limitation
            * swiveling operation, left front
            - electro-motorized back gauge, travel = 1,000 mm (X axis)
            * on ball screws
            * Travel speed 200 mm/sec.
            - manual cutting gap adjustment, via eccentric adjustment
            - hydraulic hold-down devices
            - 1x front side stop .. 1.500 mm
            - 2x front support arms .. 1.500 mm
            - Ball rollers in the front support table
            - hinged finger protection, with safety switch
            - Light barrier behind the machine (safety device)
            - 1x freely movable foot switch
            - original instruction manual

            * Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal blanks




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA DHGM 3010


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-s345 · Plate Shear - Hydraulic

          DURMA - DHGM 3010 - - 2002 -

          Technical details
          sheet width 3000 mm︱plate thickness 10 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 9,8 t︱dimensions of the machine ca. 4,15 x 3,55 x 2 m︱
          Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife length: 3.000 mm Plate thickness: 10 mm Electric backstop Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm Machine weight: 9.800 kg
            sheet width 3000 mm
            plate thickness 10 mm
            weight of the machine ca. 9,8 t
            dimensions of the machine ca. 4,15 x 3,55 x 2 m
            Description :
            Brand: Durma
            Type: DHGM 3010
            Year of make: 2002
            Knife length: 3.000 mm
            Plate thickness: 10 mm
            Electric backstop
            Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm
            Machine weight: 9.800 kg



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic Durma DHGM 3010


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S345 · Plate Shear - Hydraulic

          Durma - DHGM 3010 - - 2002 -

          Technical details
          Knife length 3000 mm︱Plate thickness 10 mm︱Machine dimensions (lxwxh) 4.150 x 3.550 x 2.000 mm︱Machine weight 9.800 kg︱
            Knife length 3000 mm
            Plate thickness 10 mm
            Machine dimensions (lxwxh) 4.150 x 3.550 x 2.000 mm
            Machine weight 9.800 kg
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Hydraulic Plate Shear from LagerMaschinen.de
          Hydraulic plate shear from LagerMaschinen - a good choice

          When purchasing a hydraulic plate shear it’s important to gauge the precision of the machine. Luckily LagerMaschinen's experts are well-versed in machine calibration and precision gears. The hydraulic plate shear used for slicing large boards among many different materials absolutely exacts precision for its various tasks. By purchasing your used machine namely a hydraulic plate shear from LagerMaschinen you ensure 100% quality as well as safety. LagerMaschinen's custom installation service will provide your staff with all needed information. Get started today!

          LagerMaschinen.de's hydraulic plate shear

          By buying your used hydraulic plate shear from LagerMaschinen.de you ensure not only a wiser financial decision for your small business but you also increase your professional network. Using the LagerMaschinen platform you can interact with sellers of every machine available including the hydraulic plate shear thereby obtaining their advice or guidance most often in your geographical area. Your hydraulic plate shear from LagerMaschinen is therefore not only an investment in your business but possibly an investment in your professional network.

          Hydraulic plate shear - built to last

          The hydraulic plate shear especially when bought used needs special care. By interacting with both LagerMaschinen.de's sellers and with LagerMaschinen experts themselves you gain knowledge as well as a new business contact along the way. Additionally take advantage of LagerMaschinens.de's delivery and installation service including a demonstration of your new - but used - machine. By purchasing your hydraulic plate shear through LagerMaschinen you'll simply add to the list of clients who love this service. Join today and start searching for the perfect machine.