.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA JDHGM 3006


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1922 · Plate Shear - Hydraulic

          HESSE by DURMA - JDHGM 3006 - - 1995 -

          Technical details
          gebraucht19959643prompt, Zwischenverkauf vTürkei19700 €︱ 13100 mm︱ 6 mm︱ 1000 mm︱ 15 kW︱ 200 l︱ 3650 mm︱ 2250 mm︱ 1830 mm︱ 5600 kg︱
          Swing cut version mot. Backgauge range 1000 mm with Elgo digital display Section column setting 1 Side stop 1000 mm withDimensional scale 2 support arms Foot pedal Rear protective grids with light barriers Cutting line illumination Cut number: 19 1/min Knives were resharpened User Manual in German CORRESPONDS TO THE GERMAN UVV AND THE AUSTRIAN AMVO
            gebraucht
            1995
            9643
            prompt, Zwischenverkauf v
            Türkei
            19700 €
            1
            3100 mm
            6 mm
            1000 mm
            15 kW
            200 l
            3650 mm
            2250 mm
            1830 mm
            5600 kg
            Description :
            Swing cut version
            mot. Backgauge range 1000 mm with Elgo digital display
            Section column setting
            1 Side stop 1000 mm withDimensional scale
            2 support arms
            Foot pedal
            Rear protective grids with light barriers
            Cutting line illumination
            Cut number: 19 1/min
            Knives were resharpened
            User Manual in German

            CORRESPONDS TO THE GERMAN UVV AND THE AUSTRIAN AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA ES 2506


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1966 · Plate Shear - Hydraulic

          HESSE by DURMA - ES 2506 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei42300 €︱ 858.69 €︱ 2500 mm︱ 6 mm︱ 4 mm︱ 15 1/min︱ 1°50’ °︱ 128.5 to︱ 750 mm︱ 120 mm/s︱ 11 kW︱ 150 l︱ 880 mm︱ 500 mm︱ 3300 mm︱ 2615 mm︱
          linear guided machine with fixed cutting angle NC-preselection system D-Touch 5 with Touch-Screen for back gauge,cutting length, quantity with USB port motorical back gauge 750 mm onlinear ball screws,folding upwards control panel at the left machine side hydraulic hold down pistons are arrangedclose to the cutting edge foot switch manual blade gap adjustment on left and right side table with balls piece counter single and continuous stroke finger protection 1 squaring arm 1. 000 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm withT-slot and tilting cam variable adjustable cuttinglength for economic processing Upper and lower knife 4-fold reversible oilfilling light barrier on the back of the machine cutting line illumination user manual in GERMAN orENGLISH machine in conformity with CE-regulations (symbol photo)
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            42300 €
            858.69 €
            2500 mm
            6 mm
            4 mm
            15 1/min
            1°50’ °
            12
            8.5 to
            750 mm
            120 mm/s
            11 kW
            150 l
            880 mm
            500 mm
            3300 mm
            2615 mm
            Description :
            linear guided machine with fixed cutting angle
            NC-preselection system D-Touch 5 with Touch-Screen for back gauge,cutting length, quantity with USB port
            motorical back gauge 750 mm onlinear ball screws,folding upwards
            control panel at the left machine side
            hydraulic hold down pistons are arrangedclose to the cutting edge
            foot switch
            manual blade gap adjustment on left and right side
            table with balls
            piece counter
            single and continuous stroke
            finger protection
            1 squaring arm 1. 000 mm with scale,T-slot and tilting cam
            2 supporting arms 1.000 mm withT-slot and tilting cam
            variable adjustable cuttinglength for economic processing
            Upper and lower knife 4-fold reversible
            oilfilling
            light barrier on the back of the machine
            cutting line illumination
            user manual in GERMAN orENGLISH
            machine in conformity with CE-regulations

            (symbol photo)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA VS 6013


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-489 · Plate Shear - Hydraulic

          HESSE by DURMA - VS 6013 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei181900 €︱ 3583.43 €︱ 6080 mm︱ 13 mm︱ 10 mm︱ 350 mm︱ 10 1/min︱ 0,5 - 2.5 °︱ 2958 to︱ 1000 mm︱ 200 mm/s︱ 37 kW︱ 400 l︱ 6 Stk.︱ 950 mm︱ 650 mm︱
          linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 6 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo)
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            181900 €
            3583.43 €
            6080 mm
            13 mm
            10 mm
            350 mm
            10 1/min
            0,5 - 2.5 °
            29
            58 to
            1000 mm
            200 mm/s
            37 kW
            400 l
            6 Stk.
            950 mm
            650 mm
            Description :
            linear guided
            CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity
            USB port
            cutting line illumination
            foldable ball screws for back gauge
            balls in table
            foldable finger protection, 1.000 mm
            side lay with T-slot, tilting cam and scale
            6 support arms wit T-slots
            oilfilling
            light barrier on the back of the machine
            user manual in GERMAN and ENGLISH

            PRICE FCA TURKEY

            (sample photo)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA VS 3006


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-476 · Plate Shear - Hydraulic

          HESSE by DURMA - VS 3006 - - -

          Technical details
          neuca. 12 Wochen ab AuftragsTürkei48500 €︱ 984.55 €︱ 3080 mm︱ 6 mm︱ 4 mm︱ 350 mm︱ 20 1/min︱ 0,5 - 2 °︱ 1620 to︱ 1000 mm︱ 200 mm/s︱ 11 kW︱ 125 l︱ 3 Stk.︱ 820 mm︱ 494 mm︱
          linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 3 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            48500 €
            984.55 €
            3080 mm
            6 mm
            4 mm
            350 mm
            20 1/min
            0,5 - 2 °
            16
            20 to
            1000 mm
            200 mm/s
            11 kW
            125 l
            3 Stk.
            820 mm
            494 mm
            Description :
            linear guided
            CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity
            USB port
            cutting line illumination
            foldable ball screws for back gauge
            balls in table
            foldable finger protection, 1.000 mm
            side lay with T-slot, tilting cam and scale
            3 support arms wit T-slots
            oilfilling
            light barrier on the back of the machine
            user manual in GERMAN and ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA SBT 3013


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-433 · Plate Shear - Hydraulic

          HESSE by DURMA - SBT 3013 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei64700 €︱ 1300.47 €︱ 3100 mm︱ 13 mm︱ 8 mm︱ 50 mm︱ 13 1/min︱ 1.75 °︱ 1637 to︱ 1000 mm︱ 200 mm/s︱ 30 kW︱ 330 l︱ 2 Stk.︱ 840 mm︱ 600 mm︱
          Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            64700 €
            1300.47 €
            3100 mm
            13 mm
            8 mm
            50 mm
            13 1/min
            1.75 °
            16
            37 to
            1000 mm
            200 mm/s
            30 kW
            330 l
            2 Stk.
            840 mm
            600 mm
            Description :
            Swing cut construction
            NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port
            Motorized back gauge 1000 mm on ball screws, folding upwards
            Clear control panel mounted on moveablearm
            Hydraulic hold down pistons are arrangedclose to the cutting edge
            Foot switch
            Central, manual blade gap adjustment
            Cutting line illumination
            Broad table with balls
            Piece counter
            Single and continous stoke
            Fold up finger guard 1.000 mm
            1 squaring arm 1. 500 mm with scale,T-slot and tilting cam
            2 supporting arms 1.000 mm with T-slot
            Simple replacement and grinding of theblades
            Variable adjustable cuttinglength for economic processing
            Lower blade fourfold turnable
            Upper blade double turnable
            Oilfilling
            Light barrier on the back of the machine
            Qualified customer support
            User manual in GERMAN and ENGLISH
            according to CE rules

            (sample photo)

            WE HAVE MORE THAN 850 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA VS 6006


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-481 · Plate Shear - Hydraulic

          HESSE by DURMA - VS 6006 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei136600 €︱ 2718.34 €︱ 6080 mm︱ 6 mm︱ 4 mm︱ 350 mm︱ 10 1/min︱ 0,5 - 2 °︱ 2920 to︱ 1000 mm︱ 200 mm/s︱ 22 kW︱ 200 l︱ 5 Stk.︱ 900 mm︱ 630 mm︱
          linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo)
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            136600 €
            2718.34 €
            6080 mm
            6 mm
            4 mm
            350 mm
            10 1/min
            0,5 - 2 °
            29
            20 to
            1000 mm
            200 mm/s
            22 kW
            200 l
            5 Stk.
            900 mm
            630 mm
            Description :
            linear guided
            CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity
            USB port
            CNC controlled cutting gap adjustment by the table (patented)
            oil cooler
            manual central lubrication
            cutting line illumination
            foldable ball screws for back gauge
            balls in table
            foldable finger protection, 1.000 mm
            side lay with T-slot, tilting cam and scale
            5 support arms wit T-slots
            oilfilling
            light barrier on the back of the machine
            user manual in GERMAN and ENGLISH

            PRICE FCA TURKEY

            (sample photo)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA SBT 3016


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-437 · Plate Shear - Hydraulic

          HESSE by DURMA - SBT 3016 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei86700 €︱ 1742.67 €︱ 3100 mm︱ 16 mm︱ 10 mm︱ 350 mm︱ 10 1/min︱ 2 °︱ 1461 to︱ 1000 mm︱ 200 mm/s︱ 37 kW︱ 410 l︱ 2 Stk.︱ 818 mm︱ 550 mm︱
          Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            86700 €
            1742.67 €
            3100 mm
            16 mm
            10 mm
            350 mm
            10 1/min
            2 °
            14
            61 to
            1000 mm
            200 mm/s
            37 kW
            410 l
            2 Stk.
            818 mm
            550 mm
            Description :
            Swing cut construction
            NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port
            Motorized back gauge 1000 mm on ball screws, folding upwards
            Clear control panel mounted on moveablearm
            Hydraulic hold down pistons are arrangedclose to the cutting edge
            Foot switch
            Central, manual blade gap adjustment
            Cutting line illumination
            Broad table with balls
            Piece counter
            Single and continous stoke
            Fold up finger guard 1.000 mm
            1 squaring arm 1. 500 mm with scale,T-slot and tilting cam
            2 supporting arms 1.000 mm with T-slot
            Simple replacement and grinding of theblades
            Variable adjustable cuttinglength for economic processing
            Lower blade fourfold turnable
            Upper blade double turnable
            Oilfilling
            Light barrier on the back of the machine
            Qualified customer support
            User manual in GERMAN and ENGLISH
            according to CE rules

            (sample photo)

            WE HAVE MORE THAN 850 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA SBT 4006


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-429 · Plate Shear - Hydraulic

          HESSE by DURMA - SBT 4006 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei58600 €︱ 1177.86 €︱ 4100 mm︱ 6 mm︱ 4 mm︱ 50 mm︱ 12 1/min︱ 1.5 °︱ 2017 to︱ 1000 mm︱ 200 mm/s︱ 15 kW︱ 200 l︱ 3 Stk.︱ 865 mm︱ 580 mm︱
          Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            58600 €
            1177.86 €
            4100 mm
            6 mm
            4 mm
            50 mm
            12 1/min
            1.5 °
            20
            17 to
            1000 mm
            200 mm/s
            15 kW
            200 l
            3 Stk.
            865 mm
            580 mm
            Description :
            Swing cut construction
            NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port
            Motorized back gauge 1000 mm on ball screws, folding upwards
            Clear control panel mounted on moveablearm
            Hydraulic hold down pistons are arrangedclose to the cutting edge
            Foot switch
            Central, manual blade gap adjustment
            Cutting line illumination
            Broad table with balls
            Piece counter
            Single and continous stoke
            Fold up finger guard 1.000 mm
            1 squaring arm 1. 500 mm with scale,T-slot and tilting cam
            2 supporting arms 1.000 mm with T-slot
            Simple replacement and grinding of theblades
            Variable adjustable cuttinglength for economic processing
            Lower blade fourfold turnable
            Upper blade double turnable
            Oilfilling
            Light barrier on the back of the machine
            Qualified customer support
            User manual in GERMAN and ENGLISH
            according to CE rules

            (sample photo)

            WE HAVE MORE THAN 850 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA SBT 3010


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-431 · Plate Shear - Hydraulic

          HESSE by DURMA - SBT 3010 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei56100 €︱ 1127.61 €︱ 3100 mm︱ 10 mm︱ 6 mm︱ 50 mm︱ 13 1/min︱ 1.5 °︱ 1622 to︱ 1000 mm︱ 200 mm/s︱ 22 kW︱ 200 l︱ 2 Stk.︱ 865 mm︱ 580 mm︱
          Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            56100 €
            1127.61 €
            3100 mm
            10 mm
            6 mm
            50 mm
            13 1/min
            1.5 °
            16
            22 to
            1000 mm
            200 mm/s
            22 kW
            200 l
            2 Stk.
            865 mm
            580 mm
            Description :
            Swing cut construction
            NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port
            Motorized back gauge 1000 mm on ball screws, folding upwards
            Clear control panel mounted on moveablearm
            Hydraulic hold down pistons are arrangedclose to the cutting edge
            Foot switch
            Central, manual blade gap adjustment
            Cutting line illumination
            Broad table with balls
            Piece counter
            Single and continous stoke
            Fold up finger guard 1.000 mm
            1 squaring arm 1. 500 mm with scale,T-slot and tilting cam
            2 supporting arms 1.000 mm with T-slot
            Simple replacement and grinding of theblades
            Variable adjustable cuttinglength for economic processing
            Lower blade fourfold turnable
            Upper blade double turnable
            Oilfilling
            Light barrier on the back of the machine
            Qualified customer support
            User manual in GERMAN and ENGLISH
            according to CE rules

            WE HAVE MORE THAN 850 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HESSE by DURMA SBT 4013


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-435 · Plate Shear - Hydraulic

          HESSE by DURMA - SBT 4013 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei89300 €︱ 1794.93 €︱ 4100 mm︱ 13 mm︱ 8 mm︱ 350 mm︱ 8 1/min︱ 1.75 °︱ 1862 to︱ 1000 mm︱ 200 mm/s︱ 30 kW︱ 330 l︱ 3 Stk.︱ 818 mm︱ 550 mm︱
          Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            89300 €
            1794.93 €
            4100 mm
            13 mm
            8 mm
            350 mm
            8 1/min
            1.75 °
            18
            62 to
            1000 mm
            200 mm/s
            30 kW
            330 l
            3 Stk.
            818 mm
            550 mm
            Description :
            Swing cut construction
            NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port
            Motorized back gauge 1000 mm on ball screws, folding upwards
            Clear control panel mounted on moveablearm
            Hydraulic hold down pistons are arrangedclose to the cutting edge
            Foot switch
            Central, manual blade gap adjustment
            Cutting line illumination
            Broad table with balls
            Piece counter
            Single and continous stoke
            Fold up finger guard 1.000 mm
            1 squaring arm 1. 500 mm with scale,T-slot and tilting cam
            2 supporting arms 1.000 mm with T-slot
            Simple replacement and grinding of theblades
            Variable adjustable cuttinglength for economic processing
            Lower blade fourfold turnable
            Upper blade double turnable
            Oilfilling
            Light barrier on the back of the machine
            Qualified customer support
            User manual in GERMAN and ENGLISH
            according to CE rules

            (sample photo)

            WE HAVE MORE THAN 850 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Hydraulic Plate Shear from LagerMaschinen.de
          Hydraulic plate shear from LagerMaschinen - a good choice

          When purchasing a hydraulic plate shear it’s important to gauge the precision of the machine. Luckily LagerMaschinen's experts are well-versed in machine calibration and precision gears. The hydraulic plate shear used for slicing large boards among many different materials absolutely exacts precision for its various tasks. By purchasing your used machine namely a hydraulic plate shear from LagerMaschinen you ensure 100% quality as well as safety. LagerMaschinen's custom installation service will provide your staff with all needed information. Get started today!

          LagerMaschinen.de's hydraulic plate shear

          By buying your used hydraulic plate shear from LagerMaschinen.de you ensure not only a wiser financial decision for your small business but you also increase your professional network. Using the LagerMaschinen platform you can interact with sellers of every machine available including the hydraulic plate shear thereby obtaining their advice or guidance most often in your geographical area. Your hydraulic plate shear from LagerMaschinen is therefore not only an investment in your business but possibly an investment in your professional network.

          Hydraulic plate shear - built to last

          The hydraulic plate shear especially when bought used needs special care. By interacting with both LagerMaschinen.de's sellers and with LagerMaschinen experts themselves you gain knowledge as well as a new business contact along the way. Additionally take advantage of LagerMaschinens.de's delivery and installation service including a demonstration of your new - but used - machine. By purchasing your hydraulic plate shear through LagerMaschinen you'll simply add to the list of clients who love this service. Join today and start searching for the perfect machine.