Cut-to-Length-Shear

---

construction: TRASTRONIC SHEAR material: hot rolled steel with oiled and not oiled surface breaking strength at 3,00 – 15,00 mm 650 N/mm² breaking strength at 15,00 – 16,00 mm 360 N/mm² three phase voltage 400 V, 50 Hz auxiliary voltage 110 V, 50 Hz voltage for magnetic valves 220 V, A.C. hydraulic pressure 11 Mpa pneumatic pressure 0,6 Mpa line speed at material thickness 3,00-8,00 mm up to 30 m/min. line speed at material thickness 8,10-15,00 mm up to 22 m/min. sheet length 800 – 17.000 mm band head length 300 mm band end length 800 mm length tolerances: max. ± 0,50 mm up to 3.000 length per 1.000 mm must be added extra length 0,10 mm die clearance adjustment cutting angle adjustment

Material Width 1250 mm︱Material Thickness 0,20-0,80 mm︱Blade Length 1300 mm︱Tensile Strength 500 N/mm²︱Speed 120 m/min︱Required Space app. m︱Machine Weight app. 10,33 t︱

---

construction CUTTING SHEAR (DRUM SHEAR - rotary shear) infeed driving unit (driven) with measuring unit no. – infeed rolls (coating – rubberized) 2 adjustment – upper roll pneumatically adjustment – measuring roll (upper) pneumatically power (SIEMENS) 3,15 kW main motor unit 3-phase-current-motor, manufacturer Ansoldo Sistemi Industriali type SN 250 P4, power 83 kW circular lubrication system electric system manufacturer DIGITEC hydraulic unit spare parts 2 pc. blades – NEW, manufacturer NEUENKAMP

---

Pipe cutting machine

Material Width 1.600 mm︱Material Thickness 0,50 - 3,00 mm︱Required Space app. m︱Machine Weight app. t︱

---

execution: FLYING SHEAR power 11 kW working direction (previously) left - right consisting of: - conveyor table - mounted - band feeding unit at infeed side - accelerator belt at run out side - automatic clearance adjustment

working width 500 mm︱material thickness 5 mm︱work speed m/min︱Materialvorschub max. 250 mm︱cutting angle bis 45 °︱power capacity 3 kW︱weight 1,5 To︱range L-W-H 3,0 x 1,5 x 1,5 mm︱

---

Cutting machine used for sealing materials, stroke length and number of cuttings are adjustable, the cutter can be adjusted to 45 degrees angular, stroke- and transport attachment do the transport of the material, the material will be placed on rolls,

Material Width 1650 mm︱Material Thickness 0,50-3,00 mm︱Blade Length 1770 mm︱Tensile Strength 450/750 N/mm²︱Speed 50 m/min︱Required Space app. m︱Machine Weight app. 6,60 t︱

---

construction HEAVY DUTY – CUTTING SHEAR (hydraulically) no. of strokes / tensile strength max. 60 strokes / 450 Nmm² no. of strokes / tensile strength max. 30 strokes / 750 Nmm² cutting speed / tensile strength 0,25 sec. / 450 Nmm² cutting speed / tensile strength 0,50 sec. / 750 Nmm² working direction (previously) left- right accessories: cutting process high dynamic special cylinder and toggle lever blade construction 2 x transverse grinded plastic reinforced deflector (infeed side) automatic adjustable hold-down device pressure adjustable kerf adjustment mechanically conveyor table (upwards of the lower blade) mounted heavy duty – hydraulic unit manufacturer MANNESMANN REXROTH, power 75 kW dimension (l x w x h) / weight: cutting shear 3.600 x 1.150 x 2.200 mm 4.270 kg hydraulic unit 2.150 x 1.900 x 2.100 mm 2.285 kg

---

construction: ROTARY SHEAR material: hot rolled plate, pickled and galvanized material strength: 600 MPa speed of introduction: 0 - 5 m/min. tolerance of measurement (each thickness/length) ± 0,30 mm performances of cut and speed: length: 500 mm, speed 10 m/min. length: 1.000 mm, speed 20 m/min. length: 1.500 mm, speed 27 m/min. length: 2.000 mm, speed 40 m/min. length: 2.500 mm, speed 40 m/min. length: 3.000 mm, speed 60 m/min. length: 6.000 mm, speed 60 m/min. electric: three-phase tension 380 V ± 10 % 50 Hz + ground auxiliary tension 110 V ± 10 % 50 Hz electro-valve tension 24 V A.C. hydraulic: presssure of nominal ooperation 100 - 105 bar pneumatic: pressure of nominal operation 6 bar

---

execution: SWING SHEAR otherwise according to technical specification 05.98-8.0

---

execution: SWING SHEAR with STACKING LINE otherwise according to technical specification 05.98-8.1