.
Avrupa stok makineleri satıcıları ağı
+ 49 (0) 2389 5299080
Arama servisi Kullanılmış makineleri sat

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:
             Görünüm: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2020

          Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:

          Duct forming machine

          used Duct forming machine RAS 22.81

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12326 · Duct forming machine

          RAS - 22.81 - - 1980 -

          Technical details
          sheet thickness - max. 1 mm︱Minimum duct dimensions 100 x 100 mm︱bending speed ca. 15 m/min︱duct size min. bei 1 mm = 100 x 100 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 5,5 x 0,65 x 1,1 m︱Electric 380 Volt ︱Foot switch ︱Machine still in the delivery factory ︱
          Machine for the production of longitudinal folds on the edges of square and rectangular channels. The year of construction is estimated. Machine dealer with own stock of 1600 m²
            sheet thickness - max. 1 mm
            Minimum duct dimensions 100 x 100 mm
            bending speed ca. 15 m/min
            duct size min. bei 1 mm = 100 x 100 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 5,5 x 0,65 x 1,1 m
            Description :
            Machine for the production of longitudinal folds on the edges of square and
            rectangular channels. The year of construction is estimated.
            Machine dealer with own stock of 1600 m²
          Datasheet
          Request / Contact
          used Duct forming machine RAS 22.81

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12327 · Duct forming machine

          RAS - 22.81 - - -

          Technical details
          sheet thickness - max. 1 mm︱Minimum duct dimensions 100 x 100 mm︱bending speed ca. 15 m/min︱duct size min. bei 1 mm = 100 x 100 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 5,5 x 0,65 x 1,1 m︱Electric 380 Volt ︱Foot switch ︱Video available on our website. ︱Machine still in the delivery factory ︱
          Machine for the production of longitudinal folds on the edges of square and rectangular channels. The year of construction is estimated. Machine dealer with own stock of 1600 m².
            sheet thickness - max. 1 mm
            Minimum duct dimensions 100 x 100 mm
            bending speed ca. 15 m/min
            duct size min. bei 1 mm = 100 x 100 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 5,5 x 0,65 x 1,1 m
            Description :
            Machine for the production of longitudinal folds on the edges of square and
            rectangular channels. The year of construction is estimated.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Flanging Machine

          used Flanging Machine RAS 21.20

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12332 · Flanging Machine

          RAS - 21.20 - - -

          Technical details
          plate thickness 1,5 mm︱roll diameter 76 mm︱bending speed 4,7/9,4 m/min︱total power requirement 0,37/0,55 kW︱weight of the machine ca. 160 kg︱dimensions of the machine ca. 0,6 x 0,6 m︱Electric 380 Volt ︱
          Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m².
            plate thickness 1,5 mm
            roll diameter 76 mm
            bending speed 4,7/9,4 m/min
            total power requirement 0,37/0,55 kW
            weight of the machine ca. 160 kg
            dimensions of the machine ca. 0,6 x 0,6 m
            Description :
            Universal flanging machine for raising rectangular shelves on straight,
            round and rectangular sheet metal parts. It has two flaring rollers, which in
            stand at a small angle of inclination to each other. The drive takes place via a
            flange geared motor that regulates two speeds in a pole-reversible manner. As
            a special accessory is an additional device for pressing in the cams for the
            cam standing seam available.
            The bending performance refers to 400 N/mm² strength.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Plate Bending Machine - 3 Rolls

          used Plate Bending Machine - 3 Rolls RAS 40.91 fuer Falzrohre

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12329 · Plate Bending Machine - 3 Rolls

          RAS - 40.91 fuer Falzrohre - - -

          Technical details
          sheet width 1500 mm︱plate thickness 1,25 mm︱pre-bending - ︱total power requirement 0,75 kW︱weight of the machine ca. 460 kg︱dimensions of the machine ca. 2 x 0,6 x 1 m︱Electric 380 Volt ︱Foot switch ︱
          Special round bending machine for air duct construction for rounding profiled sheets with folds such as corner folds, snap folds and standing folds (max height 13 mm). It is possible to round the inner and outer casings of the duct bends and air baffles that are folded on both sides. The previously required filling sheets for the different types of folds are no longer necessary. It's all three reels driven by a geared motor with re- and li-running using a foot switch. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m².
            sheet width 1500 mm
            plate thickness 1,25 mm
            pre-bending -
            total power requirement 0,75 kW
            weight of the machine ca. 460 kg
            dimensions of the machine ca. 2 x 0,6 x 1 m
            Description :
            Special round bending machine for air duct construction for rounding profiled
            sheets with folds such as corner folds, snap folds and standing folds (max
            height 13 mm). It is possible to round the inner and outer casings of the duct
            bends and air baffles that are folded on both sides. The previously required
            filling sheets for
            the different types of folds are no longer necessary. It's all three reels
            driven by a geared motor with re- and li-running using a foot switch.
            The bending performance refers to 400 N/mm² strength.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Plate Bending Machine - 3 Rolls RAS 41.20

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12336 · Plate Bending Machine - 3 Rolls

          RAS - 41.20 - - -

          Technical details
          sheet width 1250 mm︱plate thickness 1 mm︱pre-bending - ︱shaft diameter 56 mm︱weight of the machine ca. 170 kg︱dimensions of the machine ca. 1,5 x 0,55 x 1 m︱
          Manual 3-roller round bending machine with asymmetrical roller arrangement operated with hand crank via wheel transmission, upper roller can be swung out, lower rollers with annular groove, rear shaft adjustable for conical bending, front shaft adjusted via eccentric lever, rear roller adjusted via adjusting lever, rollers crowned. Machine dealer with own stock of 1600 m².
            sheet width 1250 mm
            plate thickness 1 mm
            pre-bending -
            shaft diameter 56 mm
            weight of the machine ca. 170 kg
            dimensions of the machine ca. 1,5 x 0,55 x 1 m
            Description :
            Manual 3-roller round bending machine with asymmetrical roller arrangement
            operated with hand crank via wheel transmission, upper roller can be swung out,
            lower rollers with annular groove, rear shaft adjustable for conical bending,
            front shaft adjusted via eccentric lever, rear roller adjusted via adjusting
            lever, rollers crowned.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Plate Shear - Mechanical RAS 82.25

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12333 · Plate Shear - Mechanical

          RAS - 82.25 - - -

          Technical details
          sheet width 2540 mm︱plate thickness 2 mm︱strokes per minute until 63 ︱throat 100 mm︱cutting angle 1,13 °︱table height 750 mm︱table width 320 mm︱table height over floor 750 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 3,1 x 2 x 1,3 m︱Electric 380 Volt ︱Rear register front operated 15 - 550 ︱Foot switch ︱Squaring arm ︱Support arms 3 x ︱Rear sheet tray ︱
          Motorized guillotine shears in the swing cutting system with adjustable from the front manual backgauge with analogue display and reading optics. Power transmission via gearbox, eccentric shaft and connecting rod on the cutter bar. Less noise level because the gear is only switched on during the cutting process is. Hold-down beam with continuous pressure element made of elastomers material that ensures secure clamping of the sheet metal. The cutting performance refers to 400 N/mm² strength. The machine was used in air duct construction and only cut sheets of 1 mm. Machine dealer with own stock of 1600 m².
            sheet width 2540 mm
            plate thickness 2 mm
            strokes per minute until 63
            throat 100 mm
            cutting angle 1,13 °
            table height 750 mm
            table width 320 mm
            table height over floor 750 mm
            total power requirement 3 kW
            weight of the machine ca. 1600 kg
            dimensions of the machine ca. 3,1 x 2 x 1,3 m
            Rear register front operated 15 - 550
            Support arms 3 x
            Description :
            Motorized guillotine shears in the swing cutting system with adjustable from
            the front manual backgauge with analogue display and reading optics. Power
            transmission via gearbox, eccentric shaft and connecting rod on the cutter bar.
            Less noise level because the gear is only switched on during the cutting process
            is. Hold-down beam with continuous pressure element made of elastomers
            material that ensures secure clamping of the sheet metal.
            The cutting performance refers to 400 N/mm² strength.
            The machine was used in air duct construction and only cut sheets of 1 mm.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Tüccar Profili: Plum & Partner Werkzeugmaschinen GmbH

          İletişim Trader



            Plum & Partner Werkzeugmaschinen GmbH
           Açı yolu 32
            32257 - Bünde
            Almanya
            + 49 05223 574444 "> + 49 05223 574444
            + 49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de

          Tüccar Profili



          Plum & Partner Werkzeugmaschinen GmbH 32257 - Bünde Winkelstraße 32 Deutschland
          Plum & Partner Werkzeugmaschinen GmbH

          Winkelstraße 32



          Contact Trader


            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de
            Contact person:
          Herr Andreas Plum +49 5223574444
          Herr Werner H. Kloske +49 5223574444
           

          Trader Profile



          Machine category


          · 3D Drucker Metall SLM · Abkantpresse - hydraulisch · Abkantwerkzeuge · Aufspanntisch · Ausdrehkopf · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - Automatisch · Bandsäge - horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohranlage · Bohrer · Bohrerschleifmaschine · Brennschneidemaschine · Bördelmaschine · Doppelschleifbock · Dornrohrbiegemaschine · Dreiwalzen - Blechbiegemaschine · Eckenverbindungsmaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Entgratmaschine · Falzformer · Flachschleifmaschine · Fräseinrichtung · Frässtichel-Schleifmaschine · Furnierpresse · Futter · Gewindebohrmaschine - Vertikal · Handhebel-Schere · Handspindelpresse · Hydraulikaggregat · Härteprüfer · Industriesauger · Kaltkreissäge · Kanal-Falzmaschine · Kolbenkompressor · Koordinatenschleifmaschine · Laserschneidmaschine · Leichtmetallkreissäge · Leit- und Zugspindeldrehmaschine · Lochstanze · Magnetspannplatte · Mechanikerdrehbank · Mehrspindel-Bohrkopf · Meßmittel · Nutenziehmaschine · Planscheibe · Positionierer · Profilieranlage · Profilstahlschere - Kombiniert · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Rollengang · Scheuertrommel (Rollentrommel) · Schleif - Bürstanlage · Schleifmaschinenzubehör · Schnellradialbohrmaschine · Schraubenkompressor · Schraubstock · Schweißdrehtisch - rund · Schwenkbiegemaschine · Schwingfußelement · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Werkstattpresse - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugwechselwagen · Würfeltisch ·
          Özet
          Yazılım
          Kullanılan makineler içeriği
          Gizlilik
          Bizi takip edin
          © 2000-2024, Logotech oHG · Yazılım ve İnternet Hizmetleri - Tüm hakları saklıdır