Lathes

Machinelist: Lathes

Center Lathe

RS Sperling
von-Braun-Str. 20
46244 Bottrop
Deutschland

+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9
info@rs-sperling.de
www.rs-sperling.de

#1100-011220 · Center Lathe

ZMM - CU 500 x 1500 - - 2023 -

Technical details

turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1500 (or 1000, 2000 mm) mm︱spindle bore 62 mm︱turning dia. in gap 620 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 360 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 250 mm︱upper slide-adjustment 130 mm︱diameter of quill 70 mm︱ MK 5 ︱quill stroke 180 mm︱

LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability in the most demanding working conditions. The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.

turning diameter over bed 500 mm

turning diameter over slide rest 300 mm

turning length 1500 (or 1000, 2000 mm) mm

spindle bore 62 mm

turning dia. in gap 620 mm

spindle turning speed range (21) 20 - 2000 U/min

metric threading 0,5 - 120 mm

thread - inch 60 - 1/4 inch.

thread - module 0,125 - 30 Tpi

Whitworth-thread 240 - 1 DP

bed width 360 mm

spindle cone gr. 8 (DIN 55027)

number of feeds 120 mm/U

longitudinal feeds: 0,04 - 12 mm/U

face feeds 0,02 - 6 mm

cross adjustment 250 mm

upper slide-adjustment 130 mm

diameter of quill 70 mm

MK 5

quill stroke 180 mm

Description :

LZ lathe for industry and training
Excellent quality in accuracy and stability,
which has the consequence fstability
a smooth running behavior is guaranteed and thus also a clean turning behavior.
The machine is also reliable and easy to use.
The CU 325 is ideal for small series production as well as repair work and can
also be used in training. They are built to last and for consistent performance
and durability in the most demanding working conditions.
The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.

Datasheet

used Lathes Center Lathe ZMM CU 400 x 2000 M

RS Sperling
von-Braun-Str. 20
46244 Bottrop
Deutschland

+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9
info@rs-sperling.de
www.rs-sperling.de

#1100-011232 · Center Lathe

ZMM - CU 400 x 2000 M - - 2023 -

Technical details

turning diameter over bed 440 mm︱turning diameter over slide rest 240 mm︱turning length 2000 (1000, 1500 -5000mm) mm︱spindle bore 72 mm︱turning dia. in gap 640 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 400 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 3100 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱ MK 5 ︱quill stroke 230 mm︱

turning diameter over bed 440 mm

turning diameter over slide rest 240 mm

turning length 2000 (1000, 1500 -5000mm) mm

spindle bore 72 mm

turning dia. in gap 640 mm

spindle turning speed range (21) 20 - 2000 U/min

metric threading 0,5 - 120 mm

thread - inch 60 - 1/4 inch.

thread - module 0,125 - 30 Tpi

Whitworth-thread 240 - 1 DP

bed width 400 mm

spindle cone gr. 8 (DIN 55027)

number of feeds 120 mm/U

longitudinal feeds: 0,04 - 12 mm/U

face feeds 0,02 - 6 mm

cross adjustment 3100 mm

upper slide-adjustment 130 mm

diameter of quill 90 mm

MK 5

quill stroke 230 mm

Description :

LZ lathe for industry and training
Excellent quality in accuracy and stability,
which has the consequence fstability
a smooth running behavior is guaranteed and thus also a clean turning behavior.
The machine is also reliable and easy to use.
The CU 325 is ideal for small series production as well as repair work and can
also be used in training. They are built to last and for consistent performance
and durability in the most demanding working conditions.
The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.

Datasheet

used Lathes Center Lathe ZMM CU 630 x 1000

RS Sperling
von-Braun-Str. 20
46244 Bottrop
Deutschland

+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9
info@rs-sperling.de
www.rs-sperling.de

#1100-011388 · Center Lathe

ZMM - CU 630 x 1000 - - 2023 -

Technical details

turning diameter over bed 630 mm︱turning diameter over slide rest 430 mm︱turning length 1000, 1500 - 5000 mm︱spindle bore 103 mm︱turning dia. in gap 830 mm︱throat 400 mm︱spindle turning speed - stepless 15 / 11,5 - 1250 U/min︱metric threading 0,5 - 120 ︱thread - module 0,125 - 30 mm︱thread - inch 60 - 1/4 TPI︱Whitworth-thread 240 - 1 DP︱bed width 500 mm︱spindle cone 120 Metrisch︱number of feeds 64 mm/U︱longitudinal feeds: 0,04 -12 mm/U︱face feeds 0,02 - 6 mm︱thread 64 Stufen︱face slide travel 315 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱

Very robust European lathes come from the ZMM program. The lathes are perfect for all industrial applications. These machines are very popular in 93 countries around the world. The CU 630 model is available in the turning lengths: 1m, 1.5m, 2m, 3m, 4m and 5m, or with variable speeds model CU 630 RD Characteristics: Rapid traverse with joystick protective caps halogen lighting cooling system

turning diameter over bed 630 mm

turning diameter over slide rest 430 mm

turning length 1000, 1500 - 5000 mm

spindle bore 103 mm

turning dia. in gap 830 mm

throat 400 mm

spindle turning speed - stepless 15 / 11,5 - 1250 U/min

metric threading 0,5 - 120

thread - module 0,125 - 30 mm

thread - inch 60 - 1/4 TPI

Whitworth-thread 240 - 1 DP

bed width 500 mm

spindle cone 120 Metrisch

number of feeds 64 mm/U

longitudinal feeds: 0,04 -12 mm/U

face feeds 0,02 - 6 mm

thread 64 Stufen

face slide travel 315 mm

upper slide-adjustment 130 mm

diameter of quill 90 mm

Description :

Very robust European lathes come from the ZMM program.
The lathes are perfect for all industrial applications. These machines are very
popular in 93 countries around the world. The CU 630 model is available in the
turning lengths: 1m, 1.5m, 2m, 3m, 4m and 5m, or with variable speeds model CU
630 RD

Characteristics:

Rapid traverse with joystick
protective caps
halogen lighting
cooling system

Datasheet

used Lathes Center Lathe ZMM CU 580 x 5000 M

RS Sperling
von-Braun-Str. 20
46244 Bottrop
Deutschland

+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9
info@rs-sperling.de
www.rs-sperling.de

#1100-011385 · Center Lathe

ZMM - CU 580 x 5000 M - - 2023 -

Technical details

turning diameter over bed 580 mm︱turning diameter over slide rest 380 mm︱turning length 5000 (1000 - 5000 mm) mm︱spindle bore 72 mm︱turning dia. in gap 780 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 400 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 315 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱ MK 5 ︱quill stroke 230 mm︱

LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also a clean turning behavior. Furthermore, the machine is characterized by reliable and easy operation. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability among the most demanding Working conditions. The CU model is available with 3 turning lengths 1000, 1500, 2000, 3000, 4000, 5000 mm.

turning diameter over bed 580 mm

turning diameter over slide rest 380 mm

turning length 5000 (1000 - 5000 mm) mm

spindle bore 72 mm

turning dia. in gap 780 mm

spindle turning speed range (21) 20 - 2000 U/min

metric threading 0,5 - 120 mm

thread - inch 60 - 1/4 inch.

thread - module 0,125 - 30 Tpi

Whitworth-thread 240 - 1 DP

bed width 400 mm

spindle cone gr. 8 (DIN 55027)

number of feeds 120 mm/U

longitudinal feeds: 0,04 - 12 mm/U

face feeds 0,02 - 6 mm

cross adjustment 315 mm

upper slide-adjustment 130 mm

diameter of quill 90 mm

MK 5

quill stroke 230 mm

Description :

LZ lathe for industry and training

Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm

Excellent quality in terms of accuracy and stability, resulting in
that through the stability
a quiet running behavior is guaranteed and thus also a clean
turning behavior. Furthermore, the machine is characterized by reliable and
easy operation.
The CU 325 is ideal for small series production as well as repair work and
can also be used in training. They are built to last and for
consistent performance and durability among the most demanding
Working conditions.

The CU model is available with 3 turning lengths 1000, 1500, 2000, 3000, 4000,
5000 mm.

Datasheet

used Lathes Center Lathe ZMM CU 400 x 3000 M

RS Sperling
von-Braun-Str. 20
46244 Bottrop
Deutschland

+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9
info@rs-sperling.de
www.rs-sperling.de

#1100-011235 · Center Lathe

ZMM - CU 400 x 3000 M - - 2023 -

Technical details

turning diameter over bed 440 mm︱turning diameter over slide rest 240 mm︱turning length 3000 (1000, 1500 -5000mm) mm︱spindle bore 72 mm︱turning dia. in gap 640 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 400 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 3500 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱ MK 5 ︱quill stroke 230 mm︱

turning diameter over bed 440 mm

turning diameter over slide rest 240 mm

turning length 3000 (1000, 1500 -5000mm) mm

spindle bore 72 mm

turning dia. in gap 640 mm

spindle turning speed range (21) 20 - 2000 U/min

metric threading 0,5 - 120 mm

thread - inch 60 - 1/4 inch.

thread - module 0,125 - 30 Tpi

Whitworth-thread 240 - 1 DP

bed width 400 mm

spindle cone gr. 8 (DIN 55027)

number of feeds 120 mm/U

longitudinal feeds: 0,04 - 12 mm/U

face feeds 0,02 - 6 mm

cross adjustment 3500 mm

upper slide-adjustment 130 mm

diameter of quill 90 mm

MK 5

quill stroke 230 mm

Description :

LZ lathe for industry and training
Excellent quality in accuracy and stability,
which has the consequence fstability
a smooth running behavior is guaranteed and thus also a clean turning behavior.
The machine is also reliable and easy to use.
The CU 325 is ideal for small series production as well as repair work and can
also be used in training. They are built to last and for consistent performance
and durability in the most demanding working conditions.
The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.

Datasheet

used Lathes Center Lathe ZMM CU 400 x 1000 MT

RS Sperling
von-Braun-Str. 20
46244 Bottrop
Deutschland

+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9
info@rs-sperling.de
www.rs-sperling.de

#1100-011203 · Center Lathe

ZMM - CU 400 x 1000 MT - - 2023 -

Technical details

turning diameter over bed 400 mm︱turning diameter over slide rest 236 mm︱turning length 1000 (or 750, 1500) mm︱spindle bore 52 mm︱turning dia. in gap 550 mm︱spindle turning speed range (12) 50 - 2240 U/min︱metric threading 0,25 - 7,5 mm︱thread - inch 120 - 4 inch.︱thread - module 0,0625 - 1,875 Tpi︱Whitworth-thread 480 - 16 DP︱bed width 320 mm︱spindle cone gr. 6 (DIN 55027) ︱number of feeds 80 mm/U︱longitudinal feeds: 0,015 - 0,6 mm/U︱face feeds 0,0075 - 0,3 mm︱cross adjustment 235 mm︱upper slide-adjustment 110 mm︱diameter of quill 50 mm︱ MK 4 ︱quill stroke 100 mm︱

LZ lathe for industry and training Available in 3 sizes 750, 1000 and 1500 mm and with variable speeds Model CU 400 MRD Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also a clean turning behavior. Furthermore, the machine is characterized by reliable and easy operation. The CU model is available with 3 turning lengths of 500 mm, 750 mm and 1000 mm.

turning diameter over bed 400 mm

turning diameter over slide rest 236 mm

turning length 1000 (or 750, 1500) mm

spindle bore 52 mm

turning dia. in gap 550 mm

spindle turning speed range (12) 50 - 2240 U/min

metric threading 0,25 - 7,5 mm

thread - inch 120 - 4 inch.

thread - module 0,0625 - 1,875 Tpi

Whitworth-thread 480 - 16 DP

bed width 320 mm

spindle cone gr. 6 (DIN 55027)

number of feeds 80 mm/U

longitudinal feeds: 0,015 - 0,6 mm/U

face feeds 0,0075 - 0,3 mm

cross adjustment 235 mm

upper slide-adjustment 110 mm

diameter of quill 50 mm

MK 4

quill stroke 100 mm

Description :

LZ lathe for industry and training

Available in 3 sizes 750, 1000 and 1500 mm and with variable speeds
Model CU 400 MRD

Excellent quality in terms of accuracy and stability, resulting in
that through the stability
a quiet running behavior is guaranteed and thus also a clean
turning behavior. Furthermore, the machine is characterized by reliable and
easy operation.

The CU model is available with 3 turning lengths of 500 mm, 750 mm and 1000 mm.

Datasheet

used Lathes Center Lathe ZMM CU 500 x 2000

RS Sperling
von-Braun-Str. 20
46244 Bottrop
Deutschland

+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9
info@rs-sperling.de
www.rs-sperling.de

#1100-011223 · Center Lathe

ZMM - CU 500 x 2000 - - 2023 -

Technical details

turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 2000 (or 1000, 1500 mm) mm︱spindle bore 62 mm︱turning dia. in gap 620 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 360 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 250 mm︱upper slide-adjustment 130 mm︱diameter of quill 70 mm︱ MK 5 ︱quill stroke 180 mm︱

turning diameter over bed 500 mm

turning diameter over slide rest 300 mm

turning length 2000 (or 1000, 1500 mm) mm

spindle bore 62 mm

turning dia. in gap 620 mm

spindle turning speed range (21) 20 - 2000 U/min

metric threading 0,5 - 120 mm

thread - inch 60 - 1/4 inch.

thread - module 0,125 - 30 Tpi

Whitworth-thread 240 - 1 DP

bed width 360 mm

spindle cone gr. 8 (DIN 55027)

number of feeds 120 mm/U

longitudinal feeds: 0,04 - 12 mm/U

face feeds 0,02 - 6 mm

cross adjustment 250 mm

upper slide-adjustment 130 mm

diameter of quill 70 mm

MK 5

quill stroke 180 mm

Description :

LZ lathe for industry and training
Excellent quality in accuracy and stability,
which has the consequence fstability
a smooth running behavior is guaranteed and thus also a clean turning behavior.
The machine is also reliable and easy to use.
The CU 325 is ideal for small series production as well as repair work and can
also be used in training. They are built to last and for consistent performance
and durability in the most demanding working conditions.
The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-945 · Center Lathe

ZMM - C 400 TM - - 2022 -

Technical details

neu ︱ 2022 ︱ 1672 ︱ prompt, Zwischenverkauf v ︱ Bulgarien ︱ 33100 €︱ 671.93 €︱ 1 ︱ 1 ︱ 400 mm︱ 1000 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 6 ︱ 6 M︱ 12 ︱ 50-2.240 1/min︱ 80 ︱

driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 750 mm € 32.490,- turning length 1.500 mm € 34.070,-

neu

2022

1672

prompt, Zwischenverkauf v

Bulgarien

33100 €

671.93 €

400 mm

1000 mm

200 mm

52 mm

235 mm

320 mm

6 M

50-2.240 1/min

Description :

driven by manual transmission
3-axes digital readout Fagor 40i
quick change toolpostMultisuissewith4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
spindle noseNr. 6 DIN 55027
four way rapid traverse device
spindle dead center
coolant equipment
1 pce. flange plate for lathe chuckØ 200 mm
1 adapter sleeve
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length 750 mm
€ 32.490,-

turning length 1.500 mm
€ 34.070,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-2028 · Center Lathe

ZMM - C 400 TM - - 2020 -

Technical details

gebraucht ︱ 2020 ︱ 1658 ︱ prompt, Zwischenverkauf v ︱ Bulgarien ︱ 26500 €︱ 1 ︱ 400 mm︱ 1000 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 6 ︱ 6 M︱ 12 ︱ 50-2.240 1/min︱ 80 ︱ 0.015 - 0.6 mm/U︱ 0.0075 - 0.3 mm/U︱

driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE"

gebraucht

2020

1658

prompt, Zwischenverkauf v

Bulgarien

26500 €

400 mm

1000 mm

200 mm

52 mm

235 mm

320 mm

6 M

50-2.240 1/min

0.015 - 0.6 mm/U

0.0075 - 0.3 mm/U

Description :

driven by manual transmission
3-axes digital readout Fagor 40i
quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
spindle noseNr. 6 DIN 55027
four way rapid traverse device
spindle dead center
coolant equipment
1 pce. flange plate for lathe chuckØ 200 mm
1 adapter sleeve
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
low voltage machine lamp
operating manual
machine according to "CE"

Datasheet

used Lathes Center Lathe ZMM CU / SU 582

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-2157 · Center Lathe

ZMM - CU / SU 582 - - 1991 -

Technical details

gebraucht ︱ 1991 ︱ 1681 ︱ prompt, Zwischenverkauf v ︱ Bulgarien ︱ 7900 €︱ 1 ︱ 580 mm︱ 2000 mm︱ 285 mm︱ 72 mm︱ 380 mm︱ 400 mm︱ DIN55022, Größe 8 ︱ 80 M︱ 11,2 - 2000 1/min︱ 0.04 - 3 mm︱ 255 mm︱ 140 mm︱ 75 mm︱

3-axes digital read out RSF 3-jaw chuck Forkardt Dm. 315 mm steady rest 4x steel holder gap bed type chuck protection machine lamp coolant equipment operating manual in German WITH FOLLOWING DEFECT: the clockwise rotation does not engage, so the hand lever must remain held

gebraucht

1991

1681

prompt, Zwischenverkauf v

Bulgarien

7900 €

580 mm

2000 mm

285 mm

72 mm

380 mm

400 mm

DIN55022, Größe 8

80 M

11,2 - 2000 1/min

0.04 - 3 mm

255 mm

140 mm

75 mm

Description :

3-axes digital read out RSF
3-jaw chuck Forkardt Dm. 315 mm
steady rest
4x steel holder
gap bed type
chuck protection
machine lamp
coolant equipment
operating manual in German

WITH FOLLOWING DEFECT:
the clockwise rotation does not engage, so the hand lever must remain held

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-953 · Center Lathe

ZMM - C 10 TM - - -

Technical details

neu ︱ Bulgarien ︱ 71220 €︱ 1431.52 €︱ 760 mm︱ 3000 mm︱ 380 mm︱ 132 mm︱ 520 mm︱ 560 mm︱ 11 ︱ 140 M︱ 17 ︱ 7,5 - 1015 1/min︱ 150 ︱ 0.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45 ︱

driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 58.450,- turning length2.000 mm € 61.160,- turning length4.000 mm € 76.720,- turning length5.000 mm € 88.280,- turning length6.000 mm € 100.680,-

neu

Bulgarien

71220 €

1431.52 €

760 mm

3000 mm

380 mm

132 mm

520 mm

560 mm

140 M

7,5 - 1015 1/min

150

0.039 - 18 mm/U

0.02 - 9 mm/U

0.5 - 180 mm

60 - 1/6 Gänge/"

0.125 - 45

Description :

driven by conventional transmission
3-axes digital readout
quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
3-jaw chuck Bison3295/DIN6350, Ø 400 mm
spindle dead center
four way rapid traverse device
foot pedal brake
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
tailstock quill reducer
mechanized movement of tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.500 mm
€ 58.450,-

turning length2.000 mm
€ 61.160,-

turning length4.000 mm
€ 76.720,-

turning length5.000 mm
€ 88.280,-

turning length6.000 mm
€ 100.680,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-911 · Center Lathe

ZMM - CU 325 RD - - -

Technical details

neu ︱ Bulgarien ︱ 23160 €︱ 474.78 €︱ 400 mm︱ 750 mm︱ 165 mm︱ 32 mm︱ 190 mm︱ 200 mm︱ 5 ︱ 4,5 M︱ 2 ︱ 85-405; 470-2200 U/Min︱ 48 ︱ 0.006 - 1.77 mm/U︱ 0.003 - 0.885 mm/U︱ 0.1 - 28 mm︱ 0.1 - 1.75 ︱ 4 - 70 ︱

driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 23.480,-

neu

Bulgarien

23160 €

474.78 €

400 mm

750 mm

165 mm

32 mm

190 mm

200 mm

4,5 M

85-405; 470-2200 U/Min

0.006 - 1.77 mm/U

0.003 - 0.885 mm/U

0.1 - 28 mm

0.1 - 1.75

4 - 70

Description :

driven by variable speed control (2 steps)
3-axes digital readout FAGOR with CSS (constant surface speed)
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 160 mm
spindle dead center
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.000 mm
€ 23.480,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-925 · Center Lathe

ZMM - CU 630 - - -

Technical details

neu ︱ Bulgarien ︱ 49390 €︱ 1002.62 €︱ 630 mm︱ 2000 mm︱ 315 mm︱ 103 mm︱ 430 mm︱ 400 mm︱ 11 ︱ 120 M︱ 21 ︱ 12,5 - 1250 1/min︱ 120 ︱ 0.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 60 - 1/4 Gänge/"︱ 0.125 - 30 ︱

driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 46.620,- turning length1.500 mm € 47.600,- turning length3.000 mm € 53.540,- turning length4.000 mm € 58.630,- turning length5.000 mm € 72.500,-

neu

Bulgarien

49390 €

1002.62 €

630 mm

2000 mm

315 mm

103 mm

430 mm

400 mm

120 M

12,5 - 1250 1/min

120

0.04 - 12 mm/U

0.02 - 6 mm/U

0.5 - 120 mm

60 - 1/4 Gänge/"

0.125 - 30

Description :

driven by manual transmission
3-axes digital readout
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
spindle dead center
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.000 mm
€ 46.620,-

turning length1.500 mm
€ 47.600,-

turning length3.000 mm
€ 53.540,-

turning length4.000 mm
€ 58.630,-

turning length5.000 mm
€ 72.500,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-941 · Center Lathe

ZMM - CU 1250 RD - - -

Technical details

neu ︱ Bulgarien ︱ 121780 €︱ 2423.42 €︱ 1320 mm︱ 3000 mm︱ 625 mm︱ 155 mm︱ 940 mm︱ 700 mm︱ 15 ︱ 160 M︱ 4 ︱ 3,7 - 15,6; 14,7 - 62; 58 U/Min︱ 160 ︱ 0.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 1/16 - 60 Gänge/"︱ 0.125 - 120 ︱

driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 108.130,- turning length4.000 mm € 129.460,- turning lenght 5.000 mm € 139.900,- turning length6.000 mm € 155.300,-

neu

Bulgarien

121780 €

2423.42 €

1320 mm

3000 mm

625 mm

155 mm

940 mm

700 mm

160 M

3,7 - 15,6; 14,7 - 62; 58 U/Min

160

0.032 - 38.9 mm/U

0.016 - 19.45 mm/U

0.5 - 480 mm

1/16 - 60 Gänge/"

0.125 - 120

Description :

driven by variable speed control (4 steps)
3-axes digital readout FAGOR with CSS (constant surface speed)
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
spindle dead center
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
tailstock quill reducer
electric motor movement of tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.500 mm
€ 108.130,-

turning length4.000 mm
€ 129.460,-

turning lenght 5.000 mm
€ 139.900,-

turning length6.000 mm
€ 155.300,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-949 · Center Lathe

ZMM - C 11 MCS - - -

Technical details

neu ︱ Bulgarien ︱ 50600 €︱ 1017.06 €︱ 600 mm︱ 2000 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 8 ︱ 90 M︱ 3 ︱ 20 - 100; 80 - 400; 400 - U/Min︱ 120 ︱ 64 ︱ 0.5 - 120 mm︱ 60 - 1/4 Gänge/"︱ 0.125 - 30 ︱ 315 mm︱

In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 47.850,- turning length1.500 mm € 48.890,- turning length3.000 mm € 55.090,- turning length4.000 mm € 60.340,- turning length5.000 mm € 74.360,-

neu

Bulgarien

50600 €

1017.06 €

600 mm

2000 mm

300 mm

80 mm

400 mm

90 M

20 - 100; 80 - 400; 400 - U/Min

120

0.5 - 120 mm

60 - 1/4 Gänge/"

0.125 - 30

315 mm

Description :

In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.

It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.

driven by variable speed control (3 steps)
3-axes digital readout Fagor with CSS (constant surface speed)
quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
spindle dead center
main motor with frequency invertor
four way rapid traverse device
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.000 mm
€ 47.850,-

turning length1.500 mm
€ 48.890,-

turning length3.000 mm
€ 55.090,-

turning length4.000 mm
€ 60.340,-

turning length5.000 mm
€ 74.360,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-913 · Center Lathe

ZMM - CU 500 MRD - - -

Technical details

neu ︱ Bulgarien ︱ 46190 €︱ 937.66 €︱ 500 mm︱ 1500 mm︱ 250 mm︱ 75 mm︱ 300 mm︱ 400 mm︱ 8 ︱ 80 M︱ 3 ︱ 25-100; 100-400; 500-2000 U/Min︱ 120 ︱ 0.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 0.125 - 30 ︱ 1 - 240 ︱

driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 45.150,- turning length2.000 mm € 47.900,- turning length3.000 mm € 52.490,- turning length4.000 mm € 57.840,- turning length5.000 mm € 71.960,-

neu

Bulgarien

46190 €

937.66 €

500 mm

1500 mm

250 mm

75 mm

300 mm

400 mm

80 M

25-100; 100-400; 500-2000 U/Min

120

0.04 - 12 mm/U

0.02 - 6 mm/U

0.5 - 120 mm

0.125 - 30

1 - 240

Description :

driven by variable speed control (3 steps)
3-axes digital readout FAGOR with CSS (constant surface speed)
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
spindle dead center
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length 1.000 mm
€ 45.150,-

turning length2.000 mm
€ 47.900,-

turning length3.000 mm
€ 52.490,-

turning length4.000 mm
€ 57.840,-

turning length5.000 mm
€ 71.960,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-927 · Center Lathe

ZMM - CU 630 RD - - -

Technical details

neu ︱ Bulgarien ︱ 55600 €︱ 1117.56 €︱ 630 mm︱ 2000 mm︱ 315 mm︱ 103 mm︱ 430 mm︱ 400 mm︱ 11 ︱ 120 M︱ 3 ︱ 16 - 63; 63 - 250; 315 - U/Min︱ 120 ︱ 0.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 060 - 1/4 Gänge/"︱ 0.125 - 30 ︱

driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 52.850,- turning length1.500 mm € 53.890,- turning length3.000 mm € 60.190,- turning length4.000 mm € 65.540,- turning length5.000 mm € 79.660,-

neu

Bulgarien

55600 €

1117.56 €

630 mm

2000 mm

315 mm

103 mm

430 mm

400 mm

120 M

16 - 63; 63 - 250; 315 - U/Min

120

0.04 - 12 mm/U

0.02 - 6 mm/U

0.5 - 120 mm

060 - 1/4 Gänge/"

0.125 - 30

Description :

driven by variable speed control (2 steps)
3-axes digital readout FAGOR with CSS (constant surface speed)
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
spindle dead center
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length 1.000 mm
€ 52.850,-

turning length1.500 mm
€ 53.890,-

turning length3.000 mm
€ 60.190,-

turning length4.000 mm
€ 65.540,-

turning length5.000 mm
€ 79.660,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-929 · Center Lathe

ZMM - CU 800 - - -

Technical details

neu ︱ Bulgarien ︱ 99560 €︱ 2001.16 €︱ 890 mm︱ 3000 mm︱ 400 mm︱ 155 mm︱ 490 mm︱ 700 mm︱ 15 ︱ 160 M︱ 24 ︱ 160 ︱ 0.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120 ︱ 525 mm︱

driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 86.280,- turning length2.000 mm € 89.420,- turning length4.000 mm € 106.810,- turning length5.000 mm € 116.900,- turning length6.000 mm € 132.130,-

neu

Bulgarien

99560 €

2001.16 €

890 mm

3000 mm

400 mm

155 mm

490 mm

700 mm

160 M

160

0.032 - 38.9 mm/U

0.016 - 19.45 mm/U

0.5 - 480 mm

60 - 1/16 Gänge/"

0.125 - 120

525 mm

Description :

driven by manual transmission
3-axes digital readout
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
spindle dead center
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
tailstock quill reducer
electric motor movement of tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.500 mm
€ 86.280,-

turning length2.000 mm
€ 89.420,-

turning length4.000 mm
€ 106.810,-

turning length5.000 mm
€ 116.900,-

turning length6.000 mm
€ 132.130,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-931 · Center Lathe

ZMM - CU 800 RD - - -

Technical details

neu ︱ Bulgarien ︱ 110020 €︱ 2189.4 €︱ 890 mm︱ 3000 mm︱ 400 mm︱ 155 mm︱ 490 mm︱ 700 mm︱ 15 ︱ 160 M︱ 4 ︱ 3,7 - 15,6; 14,7 - 62; 58 U/Min︱ 160 ︱ 0.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120 ︱

driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 96.170,- turning length2.000 mm € 99.590,- turning length4.000 mm € 117.600,- turning length5.000 mm € 128.040,- turning length6.000 mm € 143.440,-

neu

Bulgarien

110020 €

2189.4 €

890 mm

3000 mm

400 mm

155 mm

490 mm

700 mm

160 M

3,7 - 15,6; 14,7 - 62; 58 U/Min

160

0.032 - 38.9 mm/U

0.016 - 19.45 mm/U

0.5 - 480 mm

60 - 1/16 Gänge/"

0.125 - 120

Description :

driven by variable speed control (4 steps)
3-axes digital readout FAGOR with CSS (constant surface speed)
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
spindle dead center
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
tailstock quill reducer
electric motor movement of tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.500 mm
€ 96.170,-

turning length2.000 mm
€ 99.590,-

turning length4.000 mm
€ 117.600,-

turning length5.000 mm
€ 128.040,-

turning length6.000 mm
€ 143.440,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-935 · Center Lathe

ZMM - CU 1000 RD - - -

Technical details

neu ︱ Bulgarien ︱ 115920 €︱ 2306.81 €︱ 1090 mm︱ 3000 mm︱ 500 mm︱ 155 mm︱ 690 mm︱ 700 mm︱ 15 ︱ 160 M︱ 4 ︱ 3,7 - 15,6; 14,7 - 62; 58 U/Min︱ 160 ︱ 0.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120 ︱

driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 102.070,- turning length4.000 mm € 123.600,- turning length5.000 mm € 133.940,- turning length6.000 mm € 149.440,-

neu

Bulgarien

115920 €

2306.81 €

1090 mm

3000 mm

500 mm

155 mm

690 mm

700 mm

160 M

3,7 - 15,6; 14,7 - 62; 58 U/Min

160

0.032 - 38.9 mm/U

0.016 - 19.45 mm/U

0.5 - 480 mm

60 - 1/16 Gänge/"

0.125 - 120

Description :

driven by variable speed control (4 steps)
3-axes digital readout FAGOR with CSS (constant surface speed)
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
spindle dead center
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
tailstock quill reducer
electric motor movement of tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.500 mm
€ 102.070,-

turning length4.000 mm
€ 123.600,-

turning length5.000 mm
€ 133.940,-

turning length6.000 mm
€ 149.440,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-473 · Center Lathe

ZMM - CU 500 M - - -

Technical details

neu ︱ ca. 4 Monate ab Auftragse ︱ Bulgarien ︱ 40800 €︱ 828.24 €︱ 500 mm︱ 1500 mm︱ 250 mm︱ 80 mm︱ 300 mm︱ 400 mm︱ 8 ︱ 80 M︱ 21 ︱ 20-2000 1/min︱ 120 ︱ 0.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 64 ︱ 0.5 - 120 mm︱

driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 39.720,- turning length2.000 mm € 42.390,- turning length3.000 mm € 46.740,- turning length4.000 mm € 51.830,- turning length5.000 mm € 65.700,-

neu

ca. 4 Monate ab Auftragse

Bulgarien

40800 €

828.24 €

500 mm

1500 mm

250 mm

80 mm

300 mm

400 mm

80 M

20-2000 1/min

120

0.04 - 12 mm/U

0.02 - 6 mm/U

0.5 - 120 mm

Description :

driven by manual transmission
3-axes digital readout
quick change toolpostAmestra with 4 holders (3 square, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
spindle dead center
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.000 mm
€ 39.720,-

turning length2.000 mm
€ 42.390,-

turning length3.000 mm
€ 46.740,-

turning length4.000 mm
€ 51.830,-

turning length5.000 mm
€ 65.700,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-961 · Center Lathe

ZMM - C 10 THS - - -

Technical details

neu ︱ Bulgarien ︱ 84100 €︱ 1690.41 €︱ 860 mm︱ 3000 mm︱ 430 mm︱ 135 mm︱ 620 mm︱ 560 mm︱ 11 ︱ 140 M︱ 7 - 42; 28 - 170; 165 - 1 U/Min︱ 150 ︱ 0.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45 ︱ 240 ︱

driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 70.960,- turning length2.000 mm € 73.670,- turning length4.000 mm € 89.860,- turning length5.000 mm € 101.570,- turning length6.000 mm € 114.310,-

neu

Bulgarien

84100 €

1690.41 €

860 mm

3000 mm

430 mm

135 mm

620 mm

560 mm

140 M

7 - 42; 28 - 170; 165 - 1 U/Min

150

0.039 - 18 mm/U

0.02 - 9 mm/U

0.5 - 180 mm

60 - 1/6 Gänge/"

0.125 - 45

240

Description :

driven by variable speed control (3 steps)
3-axes digital readout FAGOR with CSS (constant surface speed)
quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
3-jaw chuck Bison3295/DIN6350, Ø 400 mm
spindle dead center
main motor with frequency invertor
four way rapid traverse device
foot pedal brake
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
tailstock quill reducer
mechanized movement of tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.500 mm
€ 70.960,-

turning length2.000 mm
€ 73.670,-

turning length4.000 mm
€ 89.860,-

turning length5.000 mm
€ 101.570,-

turning length6.000 mm
€ 114.310,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-959 · Center Lathe

ZMM - C 10 TH - - -

Technical details

neu ︱ ca. 4 Monate ab Auftragse ︱ Bulgarien ︱ 75720 €︱ 1521.97 €︱ 860 mm︱ 3000 mm︱ 430 mm︱ 132 mm︱ 620 mm︱ 560 mm︱ 11 ︱ 140 M︱ 17 ︱ 7,5 - 1015 1/min︱ 150 ︱ 0.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱

driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 62.950,- turning length2.000 mm € 65.560,- turning length4.000 mm € 81.220,- turning length5.000 mm € 92.680,- turning length6.000 mm € 105.180,-

neu

ca. 4 Monate ab Auftragse

Bulgarien

75720 €

1521.97 €

860 mm

3000 mm

430 mm

132 mm

620 mm

560 mm

140 M

7,5 - 1015 1/min

150

0.039 - 18 mm/U

0.02 - 9 mm/U

0.5 - 180 mm

60 - 1/6 Gänge/"

Description :

driven by conventional transmission
3-axes digital readout
quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
3-jaw chuck Bison3295/DIN6350, Ø 400 mm
spindle dead center
four way rapid traverse device
foot pedal brake
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
tailstock quill reducer
mechanized movement of tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length1.500 mm
€ 62.950,-

turning length2.000 mm
€ 65.560,-

turning length4.000 mm
€ 81.220,-

turning length5.000 mm
€ 92.680,-

turning length6.000 mm
€ 105.180,-

Datasheet

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-955 · Center Lathe

ZMM - C 10 TMS - - -

Technical details

neu ︱ Bulgarien ︱ 78300 €︱ 1573.83 €︱ 760 mm︱ 3000 mm︱ 380 mm︱ 132 mm︱ 520 mm︱ 560 mm︱ 11 ︱ 140 M︱ 3 ︱ 7 - 42; 28 - 170; 165 - 1 U/Min︱ 150 ︱ 0.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45 ︱

driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 65.160,- turning length2.000 mm € 67.870,- turning length4.000 mm € 84.060,- turning length5.000 mm € 95.770,- turning length6.000 mm € 108.510,-

neu

Bulgarien

78300 €

1573.83 €

760 mm

3000 mm

380 mm

132 mm

520 mm

560 mm

140 M

7 - 42; 28 - 170; 165 - 1 U/Min

150

0.039 - 18 mm/U

0.02 - 9 mm/U

0.5 - 180 mm

60 - 1/6 Gänge/"

0.125 - 45

Description :

driven by variable speed control (3 steps)
3-axes digital readout FAGOR with CSS (constant surface speed)
quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
3-jaw chuck Bison3295/DIN6350, Ø 400 mm
spindle dead center
main motor with frequency invertor
four way rapid traverse device
foot pedal brake
longitudinal stop for 1 position
coolant equipment
full length rear splash guard
leadscrew and shaft protection
safety guard for the chuck
toolholder guard
levelling bolts and plates
quick release tailstock
tailstock quill reducer
mechanized movement of tailstock
low voltage machine lamp
operating manual
machine according to "CE"

FURTHER TURNING LENGTHS:

turning length 1.500 mm
€ 65.160,-

turning length2.000 mm
€ 67.870,-

turning length4.000 mm
€ 84.060,-

turning length5.000 mm
€ 95.770,-

turning length6.000 mm
€ 108.510,-

Datasheet

TOP Manufacturer:

ZMM - KRAFT - GILDEMEISTER - INDEX - MORI SEIKI - WEILER - MAZAK - HUVEMA - COLCHESTER - BERNARDO -