Knee-and-Column Milling Machine

x-travel 970 mm︱y-travel 420 mm︱z-travel 430 mm︱Control Heidenhain TNC 135 ︱number of speeds 12 ︱speeds 31,5-1400 U/min︱feed range lengthways and crosswise 8-2000 mm/min︱feed range - vertical 4-1000 mm/min︱rapid traverse longitudinal and cross 4 m/min︱rapid traverse Z-axis 2 m/min︱table-size ca. 1300 x 350 mm︱weight of the machine ca. ca. 3,8 t︱dimensions ca. 3050x2350x2320 mm︱

---

x-travel 900 mm︱y-travel 400 mm︱z-travel 500 mm︱table surface area 1300 x 350 mm︱quill stroke 180 mm︱total power requirement 6,4 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 2,4 x 2,0 x 2,5 m︱

---

x-travel 1320 mm︱y-travel 345 mm︱z-travel 400 mm︱max. turning speeds 2240 min/-1︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 5000 mm︱y-travel 3200 mm︱z-travel 1000 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1000 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 2500 mm︱y-travel 1800 mm︱z-travel 800 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 4000 mm︱y-travel 3000 mm︱z-travel 1000 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 31000 mm︱y-travel 4310 mm︱z-travel 1500 mm︱column daylight 4000 mm︱Main spindle: ︱turning speed range - main spindle 16000 U/min︱power capacity - main spindel 34 / 44 kW︱tool taper HSK A63 ︱c-axis +/- 360 °︱A-Axis +/- 110 °︱Distance table surface - crossbeam bottom 2570 mm︱work table: ︱table surface area 30000 x 3000 mm︱max. workpiece weight 16 t︱Tool-Presetter: ︱number of toolpositions 120 pos.︱tool taper HSK A63 ︱rapid traverse ( X / Y / Z ) 20 / 20 / 16 m/min︱control Heidenhain iTNC 530 ︱total power requirement - kVA︱

---

unused 5 Axis Gantry Machining Center with moving Portal. The direct driving method using a torque motor eliminates precision problems caused by wear over time and by installing encoders on the torque motor side of the A and C axes, the actual turning angle can be accurately controlled equipped with: - CNC control Heidenhain iTNC 530 HSCI & HR 410 - fixed table: 30000 x 3000mm - 2-axis automatic head -- High speed spindle GMN HCS 230 - 16000 -- head pitch precision angle: 0.001 deg. - ATC: 120 tools (HSK A63) - Heidenhain direct linear measuring system - without coolant tank and chip conveyor

x-travel 1200 mm︱y-travel 800 mm︱z-travel 550 mm︱distance spindle center to table 150-700 mm︱distance between columns 920 mm︱table-size 1320x800 mm︱table load 2000 kg︱T-slot (width-distance-quantity) 14x120x7 mm︱spindle taper HSK-A 63/HSK-E 50 ︱spindle speed 15000 (opt. 24000/36000) U/min︱spindle drive 7.5/11 (opt. 30/39; 20/26 kW︱Spindle motor torque 47.7/70 (opt. 29.1/37.8; N.m.︱rapid traverse in x-y-z axis 30000 (opt. 40000) mm/min︱Cutting feed rate X/Y/Z axis 1~10000 (opt.1~20000) mm/min︱Tool changer 20 (opt. 24) ︱max. tool diameter 100/130 (opt. 80/130) mm︱max. tool length 300 (opt. 220) mm︱max. tool weight 8 (opt. 4) kg︱total power requirement 30 (opt. 80) kva︱Weight approx. 12 t︱

---

x-travel 1600 mm︱y-travel 1300 mm︱z-travel 700 mm︱distance spindle center to table 200-900 (opt. 225-925/250 mm︱distance between columns 1500 mm︱table-size 1800 x 1300 mm︱table load 4000 kg︱T-slot (width-distance-quantity) 22x160x8 mm︱spindle taper HSK-A 63/HSK-E 50 ︱spindle speed 15000 (opt. 24000/36000) U/min︱spindle drive 15/18,5 (opt. 25/33 od. 2 kW︱Spindle motor torque 95/118 (opt. 72.6/95.8; 1 N.m.︱rapid traverse in x-y-z axis 30000 (opt. 40000) mm/min︱Cutting feed rate X/Y/Z axis 1~20000 mm/min︱Tool changer 20 (opt. 24) ︱max. tool diameter 100/130 (opt. 80/130) mm︱max. tool length 300 (opt. 220) mm︱max. tool weight 8 (opt. 4) kg︱total power requirement 60 (opt. 80) kva︱Weight approx. 22 t︱

---

VM-2018 | VM-3018 | VM-40 ︱x-travel 2300|3200|4100 mm︱y-travel 2000 mm︱z-travel 800 mm︱distance spindle nose and table 180~980 mm︱distance between columns 1840 mm︱table-size 2300x1600|3200x1600|4100x mm︱table load 8|10|12 t︱T-slot (width-distance-quantity) 22x180x8 mm︱spindle cone 50 BT/SK︱spindle speed 6000 (opt.10000) 1/min︱spindle drive 15/18,5|22/26|22/26 kW︱Spindle motor torque 560/662 Nm (bei 10000 1/m ︱rapid traverse in x-y-z axis 20/20/15|20/20/15|15/20/1 m/min︱feeds 1~10000 mm/min︱Tool changer 32 -fach︱workpiece length 350 mm︱tool diameter 110/225 mm︱weight of tools max. 20 kg︱positioning accuracy 0,020|0,025|0,03 mm︱

---

VM-3225 | VM-4225 | VM-52 ︱x-travel 3200|4200|5100 mm︱y-travel 3000/3400 mm︱z-travel 800/1000 mm︱distance spindle nose and table 235~1235 mm︱distance between columns 2550/3050 mm︱table-size 3350x2200|4350x2200|5350x mm︱table load 15|18|21 t︱T-slot (width-distance-quantity) 28x250x13|28x250x17|28x25 mm︱spindle cone 50 BT/SK︱spindle speed 6000 (opt.10000, 15000) 1/min︱spindle drive 22/26 kW︱Spindle motor torque 560/662 Nm (bei 10000 1/m ︱rapid traverse in x-y-z axis 15/18/10~15|12/18/10~15|1 m/min︱feeds 1~8000 mm/min︱Tool changer 32 -fach︱workpiece length 350 mm︱tool diameter 110/225 mm︱weight of tools max. 20 kg︱positioning accuracy 0,025|0,030|0,040 mm︱

---

x-travel 4200 mm︱y-travel 1800+650 mm︱z-travel 800 mm︱distance spindle center to table 403-1203 mm︱distance between columns 1850 mm︱table-size 4000mm×1500 mm︱

---

VM-3230 | VM-4230 | VM-52 ︱x-travel 3200|4200|5100 mm︱y-travel 3400 mm︱z-travel 1000 mm︱distance spindle nose and table 235~1235 mm︱distance between columns 3050 mm︱table-size 3350x2200|4350x2200|5350x mm︱table load 15|18|21 t︱T-slot (width-distance-quantity) 28x250x13|28x250x17|28x25 mm︱spindle cone 50 BT/SK︱spindle speed 6000 (opt.10000, 15000) 1/min︱spindle drive 22/26 kW︱Spindle motor torque 560/662 Nm︱rapid traverse in x-y-z axis 15/18/15|12/18/15|12/18/1 m/min︱feeds 1~8000 mm/min︱Tool changer 32 -fach︱workpiece length 350 mm︱tool diameter 110/225 mm︱weight of tools max. 20 kg︱positioning accuracy 0,030|0,035|0,045 mm︱

---

x-travel 1300 mm︱y-travel 1900 mm︱z-travel 800 mm︱distance spindle nose and table 180~980 mm︱distance between columns 1840 mm︱table-size 1650x1300 mm︱table load 4 t︱T-slot (width-distance-quantity) 22x180x7 mm︱spindle cone 50 BBT︱spindle speed 10000 1/min︱spindle drive 15/18,5 kW︱Spindle motor torque 526 NM︱rapid traverse in x-y-z axis 20/20/15 m/min︱feeds 1~10000 mm/min︱Tool changer 24 -fach︱workpiece length 350 mm︱tool diameter 110/220 mm︱weight of tools max. 15 kg︱positioning accuracy 0,020|0,025|0,03 mm︱repeating accuracy 0,015|0,020|0,025 mm︱

---

Brand new bridget type milling machine with Fanuc from stock with: The column and the beam were intergraded together to provide the best dynamic rigidity and precision stability. The worktable’s length wise is parallel to the beam, create the most suitable length-width ratio. The spindle was driven by dual gear box from Europe, make sure it has the quickest response time and the lowest vibration. Extra long X axis travel, easy for customer to add attachment head , extend the working range. Unique opposite angle two door design with foot rest aside of the worktable makes load and unload the work piece much easier. German made hanging type operation box with protecting door on the right side, easy for operation and tool change. Equipped with fully automatic coil type and chain type chip conveyer. Chip collecting point is located at the back of the machine. Efficient, environmental friendly and clean. The machine is operated via an operator's panel, designed by Sky Master and made in Taiwan.

x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱

---

Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device

x-travel 5000 mm︱y-travel 3250 mm︱z-travel 1000 mm︱

---

Used milling machine CORREA FP40/40 Bridge milling machine CORREA FP40/50 OVERHAUL IN PROGRESS Type of milling machine Type: Bridge type Brand: Correa Model: FP40/50 Year of manufacture: 1998 Retrofitted: 2021 Numerical control: SIEMENS 840D Refurbished CORREA FP40/50 bridge milling machine whose structure offers an excellent combination of rigidity and dynamic performance. Its continuous milling head with C5E-2 axes allows a very versatile and high quality machining. Ideal for the automotive and aerospace industries. CORREA 5-axis milling machine, overhauled and with warranty. Technical data Dimensions Dimensions of the table: 5000 x 2000 mm Number of T-slots: 13 dimensions of T-slots: 22 mm Travels of the axes X-axis travel: 5000 mm Y-axis travel: 3250 mm travel of the Z-axis: 1000 mm distance between columns: 2500 mm Milling head Head type: C5E- 2-axis continuous head Tool clamping system: Hydraulic Taper point: BT 50 Speed range: 40 - 4000 rpm Spindle power: 37 kW / 372 Nm Feed speeds Feed rate: 2 - 5000 mm/min X-Y,Z rapid traverse: 7200 / 12000 mm/min Weight and dimensions Max. weight on the table: 25000 kg Weight of the machine: 40500 kg Dimensions of the machine: 12700 x 5070 x 4900 mm Accessories: Protection device Automatic tool changer: ATC-60 Electronic handwheel: HR-510 Terms of sale Warranty: 6 months on mechanical parts Selling price (ex works): On request For more information about the machine, standard accessories and special accessories, please refer to the attachment. You can also benefit from the favorable leasing and hire-purchase conditions of ABC Leasing: Ask us about it! Of course, we can also organize free delivery incl. assembly/commissioning and ready-to-operate handover as well as training.

2100 mm︱ 2000 mm︱ 800 mm︱ 2000x1800 mm︱ SK 50 DIN 69781 ︱ 10.000 U/min︱ 20/25/26 kW︱ 2100 mm︱ 32 ︱

---

3100 mm︱ 2300 mm︱ 800 mm︱ 3000x1500 mm︱ SK 50 DIN 69781 ︱ 10.000 U/min︱ 24/30 kW︱ 1700 mm︱ 40 ︱

---

x-travel 3200 mm︱y-travel 2000 mm︱z-travel 1000 mm︱distance spindle nose and table 200-1200 mm︱distance between columns 1820 mm︱table-size 3200×1600 mm︱table load 10 t︱T-slot (width-distance-quantity) 22x180x8 mm︱spindle cone 50 BT︱spindle speed 6000 (Direktantrieb) 1/min︱spindle drive 22 kW︱Spindle motor torque 689/1692 ︱rapid traverse in x-y-z axis 20/20/12 m/min︱feeds 1~10000 mm/min︱Tool changer Vorbereitung für WZW︱workpiece length 350 mm︱tool diameter 110/225 mm︱weight of tools max. 20 kg︱positioning accuracy 0,025 mm︱repeating accuracy 0,02 mm︱

---

x-travel 1200 mm︱y-travel 800 mm︱z-travel 500 mm︱distance spindle center to table 150-650 mm︱distance between columns 920 mm︱table-size 1320x800 mm︱table load 2000 kg︱T-slot (width-distance-quantity) 14x120x7 mm︱spindle taper HSK- A63︱spindle speed 15000 (Direktantrieb) U/min︱spindle drive 9/15 kW︱Spindle motor torque 57.3/120 N.m.︱rapid traverse in x-y-z axis 30000 mm/min︱Cutting feed rate X/Y/Z axis 1~10000 mm/min︱Tool changer 20 ︱max. tool diameter 100 mm︱max. tool length 235 mm︱max. tool weight 8 kg︱total power requirement 30 (opt. 80) kva︱Weight approx. 12 t︱

---

x-travel 5000 mm︱y-travel 3800 mm︱z-travel 1250 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 6000 mm︱y-travel 3800 mm︱z-travel 1000 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 3500 mm︱y-travel 2000 mm︱z-travel 800 mm︱

---

Overhauled CNC portal milling machine with: Type: Bridge type Brand: Correa Model: FP30/40 Year of manufacture: 1998 Retrofitted: 2020 Numerical control: HEIDENHAIN TNC-426 PB Clearance sale of the machine! Immediate delivery! This CORREA FP30/40 milling machine not only offers an excellent combination of rigidity and dynamic performance due to its design, but also guarantees very precise machining. Option direct drive head with a speed of up to 5000 rpm. Milling machine for sale after its overhaul and with guarantees. Available for immediate delivery. Visit our showroom to check the machining performance. Technical features Dimensions Table dimensions: 4000 x 1250 mm Number of T-slots: 8 dimensions of the T-slots: 22 mm Travels of the axis X-axis travel: 3500 mm Y-axis travel: 2000 mm distance between columns: 1740 mm travel of the Z-axis: 800 mm Milling head Universal manual U40 (Optional: Standard vertical spindle) Tool clamping system: Hydraulic Taper point: ISO50 Speed range: 20 - 3.000 rpm (5.000 rpm direct output as option) Spindle power: 30 kW / 725 Nm Feed rates: Feed rate: 7000 mm/min rapid traverse speed (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on the table: 10000 kg Weight of the machine: 30500 kg Dimensions of the machine: 10748 x 4762 x 4400 mm Accessories: Complete cladding Internal high pressure coolant supply through the spindle (with direct outlet option) Headrest in the column: manual change Electronic handwheel: HR-410 Longitudinal chip removal system through pallets, with transversal suction and coolant tank Conditions of sale Warranty: 6 months on mechanical parts Selling price (ex works): On request For more information about the machine, standard accessories and special accessories, please refer to the attachment.