.
Avrupa stok makineleri satıcıları ağı
+ 49 (0) 2389 5299080
Arama servisi Kullanılmış makineleri sat

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:
             Görünüm: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2024

          Folding Machine

          Machinelist: Folding Machine

          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine ERBEND UFA 1015

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2112 · Folding Machine

          ERBEND - UFA 1015 - - 2024 -

          Technical details
          neu ︱ 2024 ︱ 8315 ︱ Mai 2024, Zwischenverkauf ︱ Türkei ︱ 5530 €︱ 114.47 €︱ 1050 mm︱ 1.5 mm︱ 1 mm︱ 2.2 mm︱ 150 °︱ 500 mm︱ 200 mm︱ 1300 mm︱ 750 mm︱ 1515 mm︱ 280 kg︱ Verstellbereich 35 mm ︱
          Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English
            neu
            2024
            8315
            Mai 2024, Zwischenverkauf
            Türkei
            5530 €
            114.47 €
            1050 mm
            1.5 mm
            1 mm
            2.2 mm
            150 °
            500 mm
            200 mm
            1300 mm
            750 mm
            1515 mm
            280 kg
            Verstellbereich 35 mm
            Description :
            Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC
            Manual back gauge
            Adjustable angle gauge
            Shelve and box for tools
            Machine on rolls with brakes
            Operating manual in German or English


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine ERBEND UFA 1212

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2078 · Folding Machine

          ERBEND - UFA 1212 - - 2024 -

          Technical details
          neu ︱ 2024 ︱ 8317 ︱ Mai 2024, Zwischenverkauf ︱ Türkei ︱ 5900 €︱ 122.13 €︱ 1250 mm︱ 1.25 mm︱ 0.8 mm︱ 2 mm︱ 150 °︱ 500 mm︱ 200 mm︱ 1500 mm︱ 750 mm︱ 1715 mm︱ 315 kg︱ geteilt, 45° ︱ Verstellbereich 35 mm ︱
          Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English
            neu
            2024
            8317
            Mai 2024, Zwischenverkauf
            Türkei
            5900 €
            122.13 €
            1250 mm
            1.25 mm
            0.8 mm
            2 mm
            150 °
            500 mm
            200 mm
            1500 mm
            750 mm
            1715 mm
            315 kg
            geteilt, 45°
            Verstellbereich 35 mm
            Description :
            Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC
            Manual back gauge
            Adjustable angle gauge
            Shelve and box for tools
            Machine on rolls with brakes
            Operating manual in German or English


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine ERBEND MFG 2515

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2080 · Folding Machine

          ERBEND - MFG 2515 - - 2023 -

          Technical details
          neu ︱ 2023 ︱ 8298 ︱ prompt, Zwischenverkauf v ︱ Türkei ︱ 42730 €︱ 867.42 €︱ 1 ︱ 2550 mm︱ 1.5 mm︱ 1 mm︱ 2 mm︱ Motorisch ︱ 155 °︱ 110 mm︱ 3800 mm︱ 2350 mm︱ 1650 mm︱ 2500 kg︱ 1000 mm︱
          Grafic control 2D -15,6" touchscreen controller on swivel arm - LBL editor: tabular programming by entering the axes values - 2D part editor: programming by drawing in graphic mode and 2D visualisation - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - autorisiation with password - 128GB HDD allows almost unlimited data storage - detailled alarm, tool and paramter page back gauge 1000 mm with servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters upper tool in one pice, 20° manual height adjustment of bending beam foot pedal with 3 switches ligtht barrier on the front side Here the tutorial videos about programming: https://youtube.com/playlist?list=PL8Z5ysej4HzrlNFEblSXPhHrsknDwkrMR&si=lEODzI3gbABEKu5g
            neu
            2023
            8298
            prompt, Zwischenverkauf v
            Türkei
            42730 €
            867.42 €
            1
            2550 mm
            1.5 mm
            1 mm
            2 mm
            Motorisch
            155 °
            110 mm
            3800 mm
            2350 mm
            1650 mm
            2500 kg
            1000 mm
            Description :
            Grafic control 2D
            -15,6" touchscreen controller on swivel arm
            - LBL editor: tabular programming by entering the axes values
            - 2D part editor: programming by drawing in graphic mode and 2D visualisation
            - programming of material quality, thickness, spring back, bending correction
            and creating a data base for every type of material, thickness and length
            - autorisiation with password
            - 128GB HDD allows almost unlimited data storage
            - detailled alarm, tool and paramter page
            back gauge 1000 mm with servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters
            upper tool in one pice, 20°
            manual height adjustment of bending beam
            foot pedal with 3 switches
            ligtht barrier on the front side

            Here the tutorial videos about programming:
            https://youtube.com/playlist?list=PL8Z5ysej4HzrlNFEblSXPhHrsknDwkrMR&si=lEODzI3gbABEKu5g


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine ERBEND MFG 3210

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2084 · Folding Machine

          ERBEND - MFG 3210 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Türkei ︱ 36800 €︱ 747.04 €︱ 3200 mm︱ 1 mm︱ 0.6 mm︱ 15 mm︱ Motorisch ︱ 155 °︱ 110 mm︱ 4500 mm︱ 2100 mm︱ 1650 mm︱ 2900 kg︱ 750 mm︱ 300 mm/s︱ 0.1 +/- mm︱ 20 mm︱
          CNC CONTROL WITH TABULAR PROGRAMMING - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters upper tool in one pice, 20° manual height adjustment of bending beam foot pedal with 3 switches ligtht barrier on the front side OPTIONS: Grafic control 2D € 5.150,- -15,6" touchscreen controller on swivel arm - LBL editor: adjustment of bending steps line in line by entering the axes values - 2D part editor: programming by drawing in graphic mode and 2D visualisation - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - autorisiation with password - 128GB HDD allows almost unlimited data storage - detailled alarm, tool and paramter page back gauge 1000 mm € 4.120,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            36800 €
            747.04 €
            3200 mm
            1 mm
            0.6 mm
            15 mm
            Motorisch
            155 °
            110 mm
            4500 mm
            2100 mm
            1650 mm
            2900 kg
            750 mm
            300 mm/s
            0.1 +/- mm
            20 mm
            Description :
            CNC CONTROL WITH TABULAR PROGRAMMING
            - 15,6" touchscreen controller on swivel arm
            - tabular programming by entering the axes values
            - open or drop hemming function
            - multi radius bending function as by pressing or by bending
            - programming of material quality, thickness, spring back, bending correction
            and creating a data base for every type of material, thickness and length
            - piece counter
            - autorisiation with password
            - 128GB HDD allows almost unlimited data storage
            - remote service connection via WLAN
            - detailled alarm, tool and paramter page
            BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters
            upper tool in one pice, 20°
            manual height adjustment of bending beam
            foot pedal with 3 switches
            ligtht barrier on the front side

            OPTIONS:

            Grafic control 2D € 5.150,-
            -15,6" touchscreen controller on swivel arm
            - LBL editor: adjustment of bending steps line in line by entering the axes values
            - 2D part editor: programming by drawing in graphic mode and 2D visualisation
            - programming of material quality, thickness, spring back, bending correction
            and creating a data base for every type of material, thickness and length
            - autorisiation with password
            - 128GB HDD allows almost unlimited data storage
            - detailled alarm, tool and paramter page

            back gauge 1000 mm € 4.120,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine ERBEND MFG 2515

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2082 · Folding Machine

          ERBEND - MFG 2515 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Türkei ︱ 35000 €︱ 710.5 €︱ 2550 mm︱ 1.5 mm︱ 1 mm︱ 2 mm︱ Motorisch ︱ 155 °︱ 110 mm︱ 0,75+1,1 kW︱ 3800 mm︱ 2100 mm︱ 1650 mm︱ 2500 kg︱ 750 mm︱ 300 mm/s︱ 0.1 +/- mm︱
          CNC CONTROL WITH TABULAR PROGRAMMING - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters upper tool in one pice, 20° manual height adjustment of bending beam foot pedal with 3 switches ligtht barrier on the front side OPTIONS: Grafic control 2D € 4.860,- -15,6" touchscreen controller on swivel arm - LBL editor: adjustment of bending steps line in line by entering the axes values - 2D part editor: programming by drawing in graphic mode and 2D visualisation - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - autorisiation with password - 128GB HDD allows almost unlimited data storage - detailled alarm, tool and paramter page back gauge 1000 mm € 2.870,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            35000 €
            710.5 €
            2550 mm
            1.5 mm
            1 mm
            2 mm
            Motorisch
            155 °
            110 mm
            0,75+1,1 kW
            3800 mm
            2100 mm
            1650 mm
            2500 kg
            750 mm
            300 mm/s
            0.1 +/- mm
            Description :
            CNC CONTROL WITH TABULAR PROGRAMMING
            - 15,6" touchscreen controller on swivel arm
            - tabular programming by entering the axes values
            - open or drop hemming function
            - multi radius bending function as by pressing or by bending
            - programming of material quality, thickness, spring back, bending correction
            and creating a data base for every type of material, thickness and length
            - piece counter
            - autorisiation with password
            - 128GB HDD allows almost unlimited data storage
            - remote service connection via WLAN
            - detailled alarm, tool and paramter page
            BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters
            upper tool in one pice, 20°
            manual height adjustment of bending beam
            foot pedal with 3 switches
            ligtht barrier on the front side

            OPTIONS:

            Grafic control 2D € 4.860,-
            -15,6" touchscreen controller on swivel arm
            - LBL editor: adjustment of bending steps line in line by entering the axes values
            - 2D part editor: programming by drawing in graphic mode and 2D visualisation
            - programming of material quality, thickness, spring back, bending correction
            and creating a data base for every type of material, thickness and length
            - autorisiation with password
            - 128GB HDD allows almost unlimited data storage
            - detailled alarm, tool and paramter page

            back gauge 1000 mm € 2.870,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   
          TOP Manufacturer:

          BIEGEMASTER - FASTI - FINTEK - BERNARDO - HUVEMA - SCHROEDER - RAS - HERA - SCHRÖDER - ERBEND -

          Özet
          Yazılım
          Kullanılan makineler içeriği
          Gizlilik
          Bizi takip edin
          © 2000-2024, Logotech oHG · Yazılım ve İnternet Hizmetleri - Tüm hakları saklıdır