.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Boring mills - Machining Centers - Drilling machines

          Machinelist: Boring mills / Machining Centers / Drilling machines


          Bench Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL ALZTRONIC i14


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010604 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i14 - - Neu -

          Technical details
          14 mm︱ M 10MK 2230-4.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,7 kW︱weight 93 kg︱
            14 mm
            M 10
            MK 2
            230-4.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,7 kW
            weight 93 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL Alzstar 18-T/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010258 · Bench Drilling Machine

          ALZMETALL - Alzstar 18-T/S - - Neu -

          Technical details
          18 mm︱ M 12M 14MK 2225-4.300 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱total power requirement 0,37/0,55 kW︱Machine height 840 mm︱weight 120 kg︱
          Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection
            18 mm
            M 12
            M 14
            MK 2
            225-4.300 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            total power requirement 0,37/0,55 kW
            Machine height 840 mm
            weight 120 kg
            Description :
            Standard equipment:
            - Main switch with motor protection switch lockable
            - Reversing switch for clockwise and anti-clockwise rotation
            - Speed adjustment stepless
            - Protection IP 54
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Spindle protection with electrical protection


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL ALZTRONIC i14


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010514 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i14 - - Neu -

          Technical details
          14 mm︱ M 10MK 2230-4.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,7 kW︱weight 83 kg︱
            14 mm
            M 10
            MK 2
            230-4.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,7 kW
            weight 83 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL ALZTRONIC i16


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010515 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i16 - - Neu -

          Technical details
          16 mm︱ M 12MK 2100-2.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,7 kW︱weight 83 kg︱
            16 mm
            M 12
            MK 2
            100-2.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,7 kW
            weight 83 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL Alzstar 23-T/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010375 · Bench Drilling Machine

          ALZMETALL - Alzstar 23-T/S - - Neu -

          Technical details
          23 mm︱ M 14M 16MK 2225-4.300 U/min.︱spindle stroke 100 mm︱throat 250 mm︱column diameter 90 mm︱ 370x300 mm︱ 2 x 14 x 160 mm︱ 125/455 mm︱ 320x250 mm︱ 2 x 14 x 160 mm︱ 625/625 mm︱feed von HandHandkurbel ︱total power requirement 0,6/0,95 kW︱Machine height 1095 mm︱
          Standard equipment: - Motor protection switch - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection - Speed display digital - Connector (fully assembled, cable length 2 m)
            23 mm
            M 14
            M 16
            MK 2
            225-4.300 U/min.
            spindle stroke 100 mm
            throat 250 mm
            column diameter 90 mm
            370x300 mm
            2 x 14 x 160 mm
            125/455 mm
            320x250 mm
            2 x 14 x 160 mm
            625/625 mm
            feed von Hand
            Handkurbel
            total power requirement 0,6/0,95 kW
            Machine height 1095 mm
            Description :
            Standard equipment:
            - Motor protection switch
            - Reversing switch for clockwise and anti-clockwise rotation
            - Speed adjustment stepless
            - Protection IP 54
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Spindle protection with electrical protection
            - Speed display digital
            - Connector (fully assembled, cable length 2 m)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL ALZTRONIC i16


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010575 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i16 - - Neu -

          Technical details
          16 mm︱ M 12MK 2100-2.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,7 kW︱weight 93 kg︱
            16 mm
            M 12
            MK 2
            100-2.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,7 kW
            weight 93 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL ALZTRONIC i12


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010536 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i12 - - Neu -

          Technical details
          12 mm︱ M 10B 16250 - 5000 U/min.︱spindle stroke 40 mm︱throat 200 mm︱column diameter 50 mm︱ 2 x 12 x 80 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 110 / 250 mm︱feed von HandHandrad ︱Machine height 670 mm︱total power requirement 0,7 kW︱weight 64 kg︱
            12 mm
            M 10
            B 16
            250 - 5000 U/min.
            spindle stroke 40 mm
            throat 200 mm
            column diameter 50 mm
            2 x 12 x 80 mm
            300x240 mm
            2 x 12 x 80 mm
            110 / 250 mm
            feed von Hand
            Handrad
            Machine height 670 mm
            total power requirement 0,7 kW
            weight 64 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL ALZTRONIC i14


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010574 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i14 - - Neu -

          Technical details
          14 mm︱ M 10MK 2230-4.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,7 kW︱weight 93 kg︱
            14 mm
            M 10
            MK 2
            230-4.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,7 kW
            weight 93 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL Alzstar 23-T iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010552 · Bench Drilling Machine

          ALZMETALL - Alzstar 23-T iTRONIC - - Neu -

          Technical details
          23 mm︱ M 14M 16MK 2225-4.300 U/min.︱spindle stroke 100 mm︱throat 250 mm︱column diameter 90 mm︱ 370x300 mm︱ 2 x 14 x 160 mm︱ 125/455 mm︱ 320x250 mm︱ 2 x 14 x 160 mm︱ 625/625 mm︱feed von HandHandkurbel ︱total power requirement 0,6/0,95 kW︱Machine height 1095 mm︱weight 155 kg︱
          Standard equipment: - Motor protection switch - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection - Speed display digital - Connector (fully assembled, cable length 2 m)
            23 mm
            M 14
            M 16
            MK 2
            225-4.300 U/min.
            spindle stroke 100 mm
            throat 250 mm
            column diameter 90 mm
            370x300 mm
            2 x 14 x 160 mm
            125/455 mm
            320x250 mm
            2 x 14 x 160 mm
            625/625 mm
            feed von Hand
            Handkurbel
            total power requirement 0,6/0,95 kW
            Machine height 1095 mm
            weight 155 kg
            Description :
            Standard equipment:
            - Motor protection switch
            - Reversing switch for clockwise and anti-clockwise rotation
            - Speed adjustment stepless
            - Protection IP 54
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Spindle protection with electrical protection
            - Speed display digital
            - Connector (fully assembled, cable length 2 m)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL AX 2-T iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010504 · Bench Drilling Machine

          ALZMETALL - AX 2-T iTRONIC - - NEU -

          Technical details
          23 mm︱threading in St 60 M14 ︱threading in GG 20 M16MK 2 ︱spindle stroke 100 mm︱ 125-2400 U/min.︱throat 250 mm︱column diameter 90 mm︱ 370x300 mm︱ 2x14x160 mm︱distance spindle /table min./max. 125/455 mm︱ Handkurbel320x250 mm︱ 2x14x160 mm︱ 625/625 mm︱feed von Hand ︱height of the machine 1095 mm︱weight of the machine ca. 160 kg︱
          Standard equipment: 7" TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 12 threads/min (thread cutting capacity depends on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools). Attention: Spindle stroke is reduced by 15 mm. - Infinitely variable speed adjustment by means of adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Item 20.5 Foot switch, in addition to the thread cutting device for switching the spindle direction of rotation during the process Item 37.5 Technology calculator in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: Production process, tool diameter, cutting speed, material table, transfer function of the spindle speed as set value
            23 mm
            threading in St 60 M14
            threading in GG 20 M16
            MK 2
            spindle stroke 100 mm
            125-2400 U/min.
            throat 250 mm
            column diameter 90 mm
            370x300 mm
            2x14x160 mm
            distance spindle /table min./max. 125/455 mm
            Handkurbel
            320x250 mm
            2x14x160 mm
            625/625 mm
            feed von Hand
            height of the machine 1095 mm
            weight of the machine ca. 160 kg
            Description :
            Standard equipment:
            7" TFT LCD display with touch function: Manual input of spindle speed setpoint,
            speed display actual value, integrated drilling depth display with touch
            function.
            setpoint, actual speed display, integrated drilling depth display with touch
            zero point transfer, virtual drilling depth scale in the display, machine status
            status indicators and warnings on the display, Service information, Selectable
            operator language
            operator language: DE/EN/FR/ES/IT/NL/RU

            - Thread cutting device, for thread cutting with stop, max. 12
            threads/min (thread cutting capacity depends on spindle speed), thread depth
            adjustable via depth stop and on the TFT LCD display (4 tools).
            Attention: Spindle stroke is reduced by 15 mm.
            - Infinitely variable speed adjustment by means of adjustment lever
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - anticlockwise rotation - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Clockwise and counter-clockwise rotation via contactor control
            - Control voltage 24 Volt
            - Protection class IP 54
            - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black

            Item 20.5
            Foot switch, in addition to the thread cutting device for switching the spindle
            direction of rotation during the process

            Item 37.5
            Technology calculator in the display. The technology computer guides you
            through the
            machining task. Determination of the cutting data using the following
            parameters:
            Production process, tool diameter, cutting speed,
            material table, transfer function of the spindle speed as set value


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL AB32/SV-RFT 20


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9093638 · Bench Drilling Machine

          ALZMETALL - AB32/SV-RFT 20 - - 2002 -

          Technical details
          bore capacity in steel (diameter) 32,0 / 40,0 mm︱throat 322,5 mm︱bore stroke 160 mm︱threading M 24 ︱spindle taper 4 MK︱table: 915 x 935 mm︱T-slots 3 x 14 x 112 mm︱table height 780 mm︱distance spindle /table 304 - 998 mm︱turning speeds 65 - 2000 U/min︱column diameter 145 mm︱total power requirement 1,4 / 2,2 kW︱weight 805 kg︱range L-W-H 1200 x 800 x 2000 mm︱
          ** current new price approx. 16,700 euros **Special price on request DRILLING MACHINES HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT RFT 20 Furnishing: - pole-changing motor - Continuous speed adjustment including digital speed display - Spindle feed with electro-magnetic engagement - adjustable spindle feed (mm/rev) - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Cross table with digital display for 1 axis - EMERGENCY stop button at the front - Coolant system without container * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093638
            bore capacity in steel (diameter. 32,0 / 40,0 mm
            throat 322,5 mm
            bore stroke 160 mm
            threading M 24
            spindle taper 4 MK
            table: 915 x 935 mm
            T-slots 3 x 14 x 112 mm
            table height 780 mm
            distance spindle /table 304 - 998 mm
            turning speeds 65 - 2000 U/min
            column diameter 145 mm
            total power requirement 1,4 / 2,2 kW
            weight 805 kg
            range L-W-H 1200 x 800 x 2000 mm
            Description :
            ** current new price approx. 16,700 euros
            **Special price on request

            DRILLING MACHINES HEIGHT ADJUSTABLE WITH
            CONSTANT TABLE HEIGHT RFT 20

            Furnishing:
            - pole-changing motor
            - Continuous speed adjustment including digital speed display
            - Spindle feed with electro-magnetic engagement
            - adjustable spindle feed (mm/rev)
            - Drill head height adjustable, via hand crank
            - machined base plate with T-slots
            - adjustable drilling depth stop
            - Cross table with digital display for 1 axis
            - EMERGENCY stop button at the front
            - Coolant system without container

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093638


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL ALZSTAR 18-T/S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-80910 · Bench Drilling Machine

          ALZMETALL - ALZSTAR 18-T/S - - -

          Technical details
          bore capacity in steel (diameter) 18,0 mm︱throat 190 mm︱bore stroke 80 mm︱morse taper 2 Kurzspindel MK︱turning speeds 225 - 4.300 U/min︱voltage 400 / 50 Hz Volt︱table: 300 x 240 mm︱column diameter 65 mm︱engine output 0,37 / 0,55 kW︱weight 110 kg︱
          Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German Special accessories for an extra charge: - Base cabinet 700 x 600 x 840 mm * Item no .: 09. 434, - Euro
            bore capacity in steel (diameter. 18,0 mm
            throat 190 mm
            bore stroke 80 mm
            morse taper 2 Kurzspindel MK
            turning speeds 225 - 4.300 U/min
            voltage 400 / 50 Hz Volt
            table: 300 x 240 mm
            column diameter 65 mm
            engine output 0,37 / 0,55 kW
            weight 110 kg
            Description :
            Furnishing:
            - Large spindle speed range
            - stepless speed adjustment
            - machined base plate
            - Electrically secured spindle protection
            - Main switch lockable with motor protection switch
            - Reversing switch for clockwise and counterclockwise rotation
            - Operating instructions in German

            Special accessories for an extra charge:
            - Base cabinet 700 x 600 x 840 mm
            * Item no .: 09. 434, - Euro


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine Alzmetall AB35HST


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-BR440 · Bench Drilling Machine

          Alzmetall - AB35HST - - -

          Technical details
          Capacity 40 mm ø︱table length 600 mm︱table width 460 mm︱Spindle taper MK4 ︱speed 55 - 1.450 RPM︱Machine weight 750 kg︱
          Brand Alzmetall Machine no BR440 Type AB35HST Capacity 40 mm ø Table length 600 mm Table width 460 mm Spindle taper MK4 Speed 55 - 1.450 RPM Throat depth 320 mm Table height adjustable manually Automatic feeding Tap system 380V Machine size 850 x 1.100 x 2.000 mm Variable adjustable speed.
            Capacity 40 mm ø
            table length 600 mm
            table width 460 mm
            Spindle taper MK4
            speed 55 - 1.450 RPM
            Machine weight 750 kg
            Description :
            Brand Alzmetall
            Machine no BR440
            Type AB35HST
            Capacity 40 mm ø
            Table length 600 mm
            Table width 460 mm
            Spindle taper MK4
            Speed 55 - 1.450 RPM
            Throat depth 320 mm
            Table height adjustable manually
            Automatic feeding
            Tap system
            380V
            Machine size 850 x 1.100 x 2.000 mm

            Variable adjustable speed.



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ALZMETALL AB 3 / ES


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-BR405 · Bench Drilling Machine

          ALZMETALL - AB 3 / ES - - -

          Technical details
          Capacity 36 mm ø︱Table length 360 mm︱Table width 320 mm︱Spindle taper MK 3 ︱speeds: 380 V ︱throat max. 300 mm︱
          Brand Alzmetall Type AB 3 / ES Capacity 36 mm ø Table length 360 mm Table width 320 mm Spindle taper MK 3 Throat depth 300 mm Table height adjustable manually No automatic feeding 380V
            Capacity 36 mm ø
            Table length 360 mm
            Table width 320 mm
            Spindle taper MK 3
            speeds: 380 V
            throat max. 300 mm
            Description :
            Brand Alzmetall
            Type AB 3 / ES
            Capacity 36 mm ø
            Table length 360 mm
            Table width 320 mm
            Spindle taper MK 3
            Throat depth 300 mm
            Table height adjustable manually
            No automatic feeding
            380V



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Boring Machine - Automatic

          used Boring mills / Machining Centers / Drilling machines Boring Machine - Automatic ALZMETALL ABOMAT 50


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19072 · Boring Machine - Automatic

          ALZMETALL - ABOMAT 50 - - 1986 - PLC-Steuerung

          Technical details
          bore diameter 65 mm︱throat 380 mm︱Control PLC-Steuerung ︱bore spindle turning speed range 63 - 1600 U/min︱table-size 630 x 500 mm︱rapid traverse Z-axis 4,75 m/min︱boring feeds: 0,05 - 0,56 mm/U︱total power requirement 9 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 1,50 x 1,20 x 2,95 m︱
          Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed manually via gear shift. Pole-changing motor with 1,500/3,000 rpm. with mechanical overload clutch
            bore diameter 65 mm
            throat 380 mm
            Control PLC-Steuerung
            bore spindle turning speed range 63 - 1600 U/min
            table-size 630 x 500 mm
            rapid traverse Z-axis 4,75 m/min
            boring feeds: 0,05 - 0,56 mm/U
            total power requirement 9 kW
            weight of the machine ca. 2,0 t
            dimensions of the machine ca. 1,50 x 1,20 x 2,95 m
            Description :
            Drilling capacity in steel ST60: 65 mm
            Drilling capacity in cast iron GG20: 80 mm
            Thread cutting ST60: M68
            Thread cutting GG M72

            SPS-controlled automatic drilling machine with
            Drilling/deep hole drilling/thread cutting
            Sequence:
            1st rapid traverse to start position
            2. switch on the speed
            3. switch on the drilling feed
            4. drilling until the drilling depth is reached
            5. return in rapid traverse to start position

            Manual operation possible (speed and
            direction of rotation, rapid traverse positioning,
            Switching the drill feed on/off)

            Selection of the drill feeds and spindle speed
            manually via gear shift.
            Pole-changing motor with 1,500/3,000 rpm.
            with mechanical overload clutch


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact

          Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Drilling Machine ALZMETALL ABOMAT 35


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-40007 · Drilling Machine

          ALZMETALL - ABOMAT 35 - - 2002 -

          Technical details
          throat 330 mm︱bore slide stroke 700 mm︱spindle distance 300 mm︱distance spindle /table min 190 mm︱distance spindle /table max 890 mm︱surface area 560 x 450 mm︱spindle cone MT 4 ︱bore capacity in steel (diameter) 45 mm︱bore capacity in cast iron (diameter) 60 mm︱threading Stahl max M42 ︱threading max Guss M60 ︱rapid traverse: 4,75 m/min︱feed 0,04 - 1,35 U/min︱total power requirement kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. Höhe 2,5 m︱
          with 2-spindle drill head Franz X. LINDNER SBS-2/2
            throat 330 mm
            bore slide stroke 700 mm
            spindle distance 300 mm
            distance spindle /table min 190 mm
            distance spindle /table max 890 mm
            surface area 560 x 450 mm
            spindle cone MT 4
            bore capacity in steel (diameter. 45 mm
            bore capacity in cast iron (diam. 60 mm
            threading Stahl max M42
            threading max Guss M60
            rapid traverse: 4,75 m/min
            feed 0,04 - 1,35 U/min
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. Höhe 2,5 m
            Description :
            with 2-spindle drill head Franz X. LINDNER SBS-2/2


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling Machine ALZMETALL Abomat 30


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-2887 · Drilling Machine

          ALZMETALL - Abomat 30 - - 1983 - Heidenhain TNC 135

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 330 mm︱bore stroke 700 mm︱Control Heidenhain TNC 135 ︱total power requirement 10 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2 x 3 x 3 m︱
          Boring Machine Stroke drilling slide 700 mm, reach 330 mm,Drilling capacity up to 35/50 mmL x W x H 2,0 x 2,4 x 2,8 mWeight ca. 1.600 kg with control unit Heidenhain TNC-135,Table surface 500 x 850 mm,Spindle SK-40 Workspace: 600 x 450 x 450 Drive: 7,5 Control: Heidenhain TNC-135
            bore capacity in steel (diameter. 50 mm
            throat 330 mm
            bore stroke 700 mm
            Control Heidenhain TNC 135
            total power requirement 10 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2 x 3 x 3 m
            Description :
            Boring Machine

            Stroke drilling slide 700 mm, reach 330 mm,Drilling capacity up to 35/50 mmL x W x H 2,0 x 2,4 x 2,8 mWeight ca. 1.600 kg
            with control unit Heidenhain TNC-135,Table surface 500 x 850 mm,Spindle SK-40
            Workspace: 600 x 450 x 450
            Drive: 7,5
            Control: Heidenhain TNC-135


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact

          Drilling Machine - Universal

          used Boring mills / Machining Centers / Drilling machines Drilling Machine - Universal Alzmetall  AB5


          • INDUBA GmbH
          • Tuttlinger Straße 51
          • 78628 Rottweil
          • Deutschland

          • 0741 21787
            0741 13562
          • info@induba.de
            www.induba.de
          #2002-10017 · Drilling Machine - Universal

          Alzmetall - AB5 - - 1969 -

          Technical details
          bore diameter mm︱throat mm︱


        • INDUBA GmbH
        • Tuttlinger Straße 51
        • 78628 Rottweil
        • Deutschland

        • Datasheet
          Request / Contact

          Flange Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Flange Drilling Machine ALZMETALL Abomat 50 (60)


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-40009 · Flange Drilling Machine

          ALZMETALL - Abomat 50 (60) - - 1982 -

          Technical details
          bore capacity in steel (diameter) 65 mm︱rotary table dia. 1000 mm︱number of spindles 1 ︱bore capacity in cast iron (diameter) 75 mm︱feed 0,1 - 2,8 U/min︱spindle turning speed range 63 - 1600 U/min︱spindle taper ISA 40 ︱stroke 700 mm︱total power requirement 10 kW︱weight of the machine ca. 2,7 t︱dimensions of the machine ca. 1,8 x 2,8 x 2,9 m︱
          Longitudinal table 600 x 700mm was converted to Walter CNC circular dividing table ø1000mm Reinforced column on Abomat 60 2 axes digital display
            bore capacity in steel (diameter. 65 mm
            rotary table dia. 1000 mm
            number of spindles 1
            bore capacity in cast iron (diam. 75 mm
            feed 0,1 - 2,8 U/min
            spindle turning speed range 63 - 1600 U/min
            spindle taper ISA 40
            stroke 700 mm
            total power requirement 10 kW
            weight of the machine ca. 2,7 t
            dimensions of the machine ca. 1,8 x 2,8 x 2,9 m
            Description :
            Longitudinal table 600 x 700mm was converted to Walter CNC circular dividing table ø1000mm
            Reinforced column on Abomat 60
            2 axes digital display


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact

          Gang Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Gang Drilling Machine ALZMETALL AB4 SV, RVT 4/3


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3116 · Gang Drilling Machine

          ALZMETALL - AB4 SV, RVT 4/3 - - 1978 -

          Technical details
          number of spindles 3 ︱bore capacity in steel (diameter) 40 mm︱bore stroke 180 mm︱weight of the machine ca. 2,3 t︱
            number of spindles 3
            bore capacity in steel (diameter. 40 mm
            bore stroke 180 mm
            weight of the machine ca. 2,3 t


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76270 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514 x 360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117 / 701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160 - 2250 UpM︱total power requirement 1,45 / 1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24 mm
            threading in GG 20 M 30
            bore stroke 120 mm
            Short spindle MK 3
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514 x 360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117 / 701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160 - 2250 UpM
            total power requirement 1,45 / 1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection

            Pos. 25
            Coolant device B, consisting of: separate container (33l),
            Pump with motor protection switch, complete fitting


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 40 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010510 · Pillar Drilling Machine

          ALZMETALL - AB 40 iTRONIC - - Neu -

          Technical details
          40 mm︱bore capacity in cast iron 46 mm︱ 50 mm︱ M 30M36MK 4 ︱throat 300 mm︱ 100-1600 U/min.︱ 615x430 mm︱ 2x14x224 mm︱Distance spindle/table max. 147/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱height of the machine 1885 mm︱drive motor 1,8/2,9 kW︱weight of the machine ca. 450 kg︱
            40 mm
            bore capacity in cast iron 46 mm
            50 mm
            M 30
            M36
            MK 4
            throat 300 mm
            100-1600 U/min.
            615x430 mm
            2x14x224 mm
            Distance spindle/table max. 147/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            height of the machine 1885 mm
            drive motor 1,8/2,9 kW
            weight of the machine ca. 450 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3s iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010590 · Pillar Drilling Machine

          ALZMETALL - AX 3s iTRONIC - - NEU -

          Technical details
          bore capacity in steel St 60 25 mm︱Drilling capacity in St 60 30 mm︱threading in St 60 M 16M 20 ︱Short spindle MK 3 ︱spindle stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2x14x224 mm︱distance spindle - column min./max. 132/724 mm︱feed von Hand ︱0 stufenlos ︱Spindle Speed 225-4300 U/min.︱engine 1,0/1,6 kW︱voltage 400 V︱
            bore capacity in steel St 60 25 mm
            Drilling capacity in St 60 30 mm
            threading in St 60 M 16
            M 20
            Short spindle MK 3
            spindle stroke 140 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2x14x224 mm
            distance spindle - column min./m. 132/724 mm
            feed von Hand
            0 stufenlos
            Spindle Speed 225-4300 U/min.
            engine 1,0/1,6 kW
            voltage 400 V


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010591 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30MK 4 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            40 mm
            M 24
            M 30
            MK 4
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514x360 mm
            2 x 14 x 224 mm
            117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •