.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Presses

          Machinelist: Presses


          Double Column Drawing Press - Hydraulic

          used Presses Double Column Drawing Press - Hydraulic DUNKES HDS 63


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-450868 · Double Column Drawing Press - Hydraulic

          DUNKES - HDS 63 - - 1987 -

          Technical details
          pressure 63 t︱distance between columns 650 mm︱stroke 200 mm︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            pressure 63 t
            distance between columns 650 mm
            stroke 200 mm
            total power requirement 30 kW


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press - Hydraulic DUNKES HDS 125


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-434175 · Double Column Drawing Press - Hydraulic

          DUNKES - HDS 125 - - 1987 -

          Technical details
          pressure 125 t︱distance between columns 1050 mm︱stroke 250 mm︱total power requirement 40 kW︱weight of the machine ca. 8,5 t︱dimensions of the machine ca. m︱
            pressure 125 t
            distance between columns 1050 mm
            stroke 250 mm
            total power requirement 40 kW
            weight of the machine ca. 8,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Double Column Drawing Press -Hydr.

          used Presses Double Column Drawing Press -Hydr. DUNKES HDZ 315 / 100 / 63 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183011 · Double Column Drawing Press -Hydr.

          DUNKES - HDZ 315 / 100 / 63 (CE) - - 1993 - Option: Siemens S7-1500 F (neu

          Technical details
          pressure 315 t︱distance between columns 2350 mm︱distance table/ram, max. stroke up, adjustment up 1200 mm︱distance between cutting impact cushioning 1600 mm︱Distance table/ram, stroke up 1200 mm︱stroke 800 mm︱table surface area 2060 x 1260 mm︱table height over floor 750 mm︱Die cushion pressure in table 100 t︱Die cushion stroke in table 400 mm︱die cushion area 1250 x 1000 mm︱side window 780 mm︱ram surface 2200 x 1500 mm︱Capacity of ejector in ram 63 t︱speed down 500 mm/s︱speed up 310 / 410 mm/s︱working speed 20 - 73 mm/s︱quantity of oil 3900 l︱power requirement 80,0 + 45,0 kW︱weight 55,0 t︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F
            pressure 315 t
            distance between columns 2350 mm
            distance table/ram, max. stroke . 1200 mm
            distance between cutting impact . 1600 mm
            Distance table/ram, stroke up 1200 mm
            stroke 800 mm
            table surface area 2060 x 1260 mm
            table height over floor 750 mm
            Die cushion pressure in table 100 t
            Die cushion stroke in table 400 mm
            die cushion area 1250 x 1000 mm
            side window 780 mm
            ram surface 2200 x 1500 mm
            Capacity of ejector in ram 63 t
            speed down 500 mm/s
            speed up 310 / 410 mm/s
            working speed 20 - 73 mm/s
            quantity of oil 3900 l
            power requirement 80,0 + 45,0 kW
            weight 55,0 t
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking
            can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. DUNKES HS 4 - 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-153028V · Double Column Drawing Press -Hydr.

          DUNKES - HS 4 - 100 (UVV) - - 1991 - Siemens S 5

          Technical details
          pressure 100 t︱distance between columns 770 mm︱stroke 200 mm︱distance table/ram, stroke up 800 mm︱Table area 770 x 900 mm︱table height above floor 850 mm︱die cushion pressure in table 40 t︱die cushion stroke in table 200 mm︱die cushion area in table 600 x 600 mm︱side window 600 mm︱ram surface 770 x 900 mm︱speed down 62 mm/s︱speed up 350 mm/s︱working speed 17,5 mm/s︱oil volume 700 l︱power requirement 42,0 kW︱weight 9,0 t︱Dimensions (WxDxH) 2,6x 2,0 x 3,8 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available
            pressure 100 t
            distance between columns 770 mm
            stroke 200 mm
            distance table/ram, stroke up 800 mm
            Table area 770 x 900 mm
            table height above floor 850 mm
            die cushion pressure in table 40 t
            die cushion stroke in table 200 mm
            die cushion area in table 600 x 600 mm
            side window 600 mm
            ram surface 770 x 900 mm
            speed down 62 mm/s
            speed up 350 mm/s
            working speed 17,5 mm/s
            oil volume 700 l
            power requirement 42,0 kW
            weight 9,0 t
            Dimensions (WxDxH) 2,6x 2,0 x 3,8 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop
            No foundation pit necessary
            can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. DUNKES HDZ 200/80 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063028 · Double Column Drawing Press -Hydr.

          DUNKES - HDZ 200/80 (UVV) - - 1982 - konventionell

          Technical details
          pressure 200 t︱distance between columns 1650 mm︱stroke 600 mm︱distance table/ram, max. stroke up, adjustment up 1200 mm︱table surface area 1600 x 1250 mm︱die cushion capacity 80 t︱die cushion stroke 300 mm︱die cushion area 1300 x 900 mm︱table height over floor 800 mm︱ram surface 1600 x 1250 mm︱oil volume 2000 l︱power capacity 43,0 kW︱weight 25,0 t︱Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m︱height beneath floor 0,85 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, cutting impact cushioning, two-hand operation can be offered without or with putting into operation in given condition
            pressure 200 t
            distance between columns 1650 mm
            stroke 600 mm
            distance table/ram, max. stroke . 1200 mm
            table surface area 1600 x 1250 mm
            die cushion capacity 80 t
            die cushion stroke 300 mm
            die cushion area 1300 x 900 mm
            table height over floor 800 mm
            ram surface 1600 x 1250 mm
            oil volume 2000 l
            power capacity 43,0 kW
            weight 25,0 t
            Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m
            height beneath floor 0,85 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, cutting impact cushioning, two-hand operation
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Double-Column Presse

          used Presses Double-Column Presse DUNKES HS 2-63


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-143064 · Double-Column Presse

          DUNKES - HS 2-63 - - 1998 - konventionell

          Technical details
          Pressure 63 t︱distance between columns 1000 mm︱stroke 300 mm︱Distance table/ram, max. stroke up, adjustment up 850 mm︱table surface area 980 x 500 mm︱table height above floor 850 mm︱ram surface 130 mm︱speed down 400 mm/s︱speed up 461 mm/s︱working speed 14 - 97 mm/s︱power requirement 15,0 kW︱Weight 5,0 t︱Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m︱
          with oil-hydraulic drive, controllable dependent on pressure, mechanical depth stop No foundation pit necessary
            Pressure 63 t
            distance between columns 1000 mm
            stroke 300 mm
            Distance table/ram, max. stroke . 850 mm
            table surface area 980 x 500 mm
            table height above floor 850 mm
            ram surface 130 mm
            speed down 400 mm/s
            speed up 461 mm/s
            working speed 14 - 97 mm/s
            power requirement 15,0 kW
            Weight 5,0 t
            Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m
            Description :
            with oil-hydraulic drive, controllable dependent on pressure, mechanical depth stop
            No foundation pit necessary


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse DUNKES HDS 160 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073141 · Double-Column Presse

          DUNKES - HDS 160 (UVV) - - 1988 - Siemens S 5

          Technical details
          pressure 160 t︱distance between columns 880 mm︱stroke 150 mm︱distance table/ram, max. stroke up, adjustment up 400 mm︱table surface area 830 x 1000 mm︱hole in the table 265 x 365 mm︱table height over floor 850 mm︱side window 610 mm︱ram surface 860 x 1000 mm︱oil volume l︱power requirement 55,0 kW︱weight 14,7 t︱Dimensions (WxDxH) 2,2 x 2,0 x 4,3 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, depth stop, adjustable table, two-hand operation No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 160 t
            distance between columns 880 mm
            stroke 150 mm
            distance table/ram, max. stroke . 400 mm
            table surface area 830 x 1000 mm
            hole in the table 265 x 365 mm
            table height over floor 850 mm
            side window 610 mm
            ram surface 860 x 1000 mm
            power requirement 55,0 kW
            weight 14,7 t
            Dimensions (WxDxH) 2,2 x 2,0 x 4,3 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, depth stop, adjustable table, two-hand operation
            No foundation pit necessary
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Drawing Press - 1-Col.Hydr.

          used Presses Drawing Press - 1-Col.Hydr. DUNKES HZS 250


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0024 · Drawing Press - 1-Col.Hydr.

          DUNKES - HZS 250 - - 1989 -

          Technical details
          Press capacity 250 t︱Throat depth 430 mm︱Stroke 300 mm︱Daylight 500 mm︱Table surface area 1.100 x 850 mm︱Approach speed 330 mm / s︱Working speed 11 - 30 mm / s︱Return speed 330 mm / s︱Die cushion capacity in table 80 t︱Die cushion stroke 100 mm︱Ejector in ram 5 t︱Ejector stroke in ram 75 mm︱Oil volume 1.400 l︱Dimensions L x W x H 3.200 x 2.500 x 4.250 mm︱Weight of machine approx. 32 t︱
            Press capacity 250 t
            Throat depth 430 mm
            Stroke 300 mm
            Daylight 500 mm
            Table surface area 1.100 x 850 mm
            Approach speed 330 mm / s
            Working speed 11 - 30 mm / s
            Return speed 330 mm / s
            Die cushion capacity in table 80 t
            Die cushion stroke 100 mm
            Ejector in ram 5 t
            Ejector stroke in ram 75 mm
            Oil volume 1.400 l
            Dimensions L x W x H 3.200 x 2.500 x 4.250 mm
            Weight of machine approx. 32 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact

          Single Column Press - Hydraulic

          used Presses Single Column Press - Hydraulic DUNKES HZT 10


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024018 · Single Column Press - Hydraulic

          DUNKES - HZT 10 - - 2000 -

          Technical details
          Pressing force 10 t︱oil pressure max. in the work cylinder 310 bar︱engine output 3 kW︱tracking travel 70 ms 8 mm︱weight 1650 kg︱
            Pressing force 10 t
            oil pressure max. in the work cy. 310 bar
            engine output 3 kW
            tracking travel 70 ms 8 mm
            weight 1650 kg


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 40 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173063 · Single Column Press - Hydraulic

          DUNKES - HZ 40 (CE) - - 1997 - konventionell

          Technical details
          pressure 40 t︱throat 300 mm︱stroke 630 mm︱dayligth 900 mm︱table surface area 620 x 520 mm︱hole in the table 150 mm︱table height over floor 600 mm︱ram surface 150 mm︱total power requirement 15,0 kW︱weight of the machine ca. 4,5 t︱required space 1,0 x 1,9 x 3,0 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse
            pressure 40 t
            throat 300 mm
            stroke 630 mm
            dayligth 900 mm
            table surface area 620 x 520 mm
            hole in the table 150 mm
            table height over floor 600 mm
            ram surface 150 mm
            total power requirement 15,0 kW
            weight of the machine ca. 4,5 t
            required space 1,0 x 1,9 x 3,0 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HD 10


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-62047 · Single Column Press - Hydraulic

          DUNKES - HD 10 - - 1993 -

          Technical details
          pressure 10 t︱throat 0 mm︱stroke 400 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6500 t︱dimensions of the machine ca. m︱
          D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features * DUNKES CNC Control, Model 200, can be programmed with presettable parameters, e.g. Stroke, speed, forward and return motion, pressing time, etc. * Separate switch cabinet with floppy disk input. * Pendant control with monitor. * Two-handed release, in conjunction with pneumatic safety door. * A turning device for calibrating and smoothing of bores is mounted on the ram. (Calibrating mandrel moves into the bore and rotates, powered by it own motor-driven timer. Repetitions are controlled by stroke counter.)
            pressure 10 t
            stroke 400 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6500 t
            Description :
            D U N K E S (Germany)
            CNC Controlled Hydraulic Double Column Press
            Model HD 10
            Year 1993
            ________________________________________________________

            Pressure 10 tons
            Ram stroke 400 mm
            Mounting height 600 mm

            Table size 400 x 300 mm
            Table height above floor 820 mm
            Ram area 400 x 300 mm
            Ram bore 40 mm

            Quickspeed, downwards, max. 70 mm/s
            Working speed, downwards, using max. pressure 40 mm/s
            Working speed, min. 5 mm/s
            Working speed adjustable from 5 - 70 mm/s
            Return stroke speed, min./max. 20 / 175 mm/s

            Drive 7.5 kW
            Total electrical load, approx. 12 kW - 380 V - 50 Hz
            Weight, approx. 6,500 kg

            Accessories / Special Features
            * DUNKES CNC Control, Model 200, can be programmed with
            presettable parameters, e.g. Stroke, speed, forward and
            return motion, pressing time, etc.
            * Separate switch cabinet with floppy disk input.
            * Pendant control with monitor.
            * Two-handed release, in conjunction with pneumatic safety door.
            * A turning device for calibrating and smoothing of bores is
            mounted on the ram. (Calibrating mandrel moves into the bore
            and rotates, powered by it own motor-driven timer. Repetitions
            are controlled by stroke counter.)


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 6,3


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233004 · Single Column Press - Hydraulic

          DUNKES - HZ 6,3 - - 1993 - konventionell

          Technical details
          pressure 2 x 6,3 t︱stroke 307 mm︱throat 180 mm︱dayligth 900 mm︱table surface area 470 x 360 mm︱die cushion capacity t︱die cushion stroke mm︱die cushion area mm︱table height over floor 810 mm︱ram surface 45 mm︱feed down 137 mm/s︱feed up 33 mm/s︱working feed 540 mm/s︱oil volume 140 l︱power requirement 3,0 kW︱Weight 1,5 t︱dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t
            pressure 2 x 6,3 t
            stroke 307 mm
            throat 180 mm
            dayligth 900 mm
            table surface area 470 x 360 mm
            table height over floor 810 mm
            ram surface 45 mm
            feed down 137 mm/s
            feed up 33 mm/s
            working feed 540 mm/s
            oil volume 140 l
            power requirement 3,0 kW
            Weight 1,5 t
            dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

            Press has 2 Press shafts - press force 2 x 6,3 t


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZS 75


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-495012 · Single Column Press - Hydraulic

          DUNKES - HZS 75 - - 1992 -

          Technical details
          pressure 75 t︱throat 280 mm︱stroke 303 mm︱total power requirement 15 kW︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. m︱
            pressure 75 t
            throat 280 mm
            stroke 303 mm
            total power requirement 15 kW
            weight of the machine ca. 7000 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZS 160 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093006 · Single Column Press - Hydraulic

          DUNKES - HZS 160 (UVV) - - 1992 - Dunkes PC 10

          Technical details
          pressure 160 t︱stroke 150 mm︱throat 370 mm︱dayligth 500 mm︱table surface area 1000 x 700 mm︱table height over floor 820 mm︱ram surface 600 x 520 mm︱feed down 350 mm/s︱feed up 350 mm/s︱working feed 12 - 36 mm/s︱oil volume 1100 l︱power requirement 27,0 kW︱Weight 16,5 t︱dimensions of the machine ca. 1,8 x 2,7 x 3,95 mxmxm︱hole in the table 100 mm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop (motoric adjustable), two-hand operation
            pressure 160 t
            stroke 150 mm
            throat 370 mm
            dayligth 500 mm
            table surface area 1000 x 700 mm
            table height over floor 820 mm
            ram surface 600 x 520 mm
            feed down 350 mm/s
            feed up 350 mm/s
            working feed 12 - 36 mm/s
            oil volume 1100 l
            power requirement 27,0 kW
            Weight 16,5 t
            dimensions of the machine ca. 1,8 x 2,7 x 3,95 mxmxm
            hole in the table 100 mm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop (motoric adjustable), two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZS 25


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-583757 · Single Column Press - Hydraulic

          DUNKES - HZS 25 - - 1990 -

          Technical details
          pressure 25 t︱throat 250 mm︱stroke 100 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 1000 x 1700 x 2600 m︱
            pressure 25 t
            throat 250 mm
            stroke 100 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3200 kg
            dimensions of the machine ca. 1000 x 1700 x 2600 m


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 25 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123051 · Single Column Press - Hydraulic

          DUNKES - HZ 25 (UVV) - - 1988 - konventionell

          Technical details
          pressure 25 t︱stroke 1000 mm︱throat 400 mm︱dayligth 1100 mm︱table surface area 620 x 620 mm︱table height over floor 650 mm︱ram surface 110 mm︱feed down 300 mm/s︱feed up 500 mm/s︱working feed 14 - 85 mm/s︱oil volume 400 l︱power requirement 6,0 kW︱Weight 3,8 t︱dimensions of the machine ca. 1,5 x 2,1 x 3,9 mxmxm︱hole in the table 80 mm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, delicate foot-pedal control
            pressure 25 t
            stroke 1000 mm
            throat 400 mm
            dayligth 1100 mm
            table surface area 620 x 620 mm
            table height over floor 650 mm
            ram surface 110 mm
            feed down 300 mm/s
            feed up 500 mm/s
            working feed 14 - 85 mm/s
            oil volume 400 l
            power requirement 6,0 kW
            Weight 3,8 t
            dimensions of the machine ca. 1,5 x 2,1 x 3,9 mxmxm
            hole in the table 80 mm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, delicate foot-pedal control


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073068 · Single Column Press - Hydraulic

          DUNKES - HZ 100 (UVV) - - 1985 - konventionell

          Technical details
          pressure 100 t︱stroke 650 mm︱throat 380 mm︱dayligth 950 mm︱table surface area 800 x 700 mm︱table height over floor 920 mm︱ram surface 630 x 600 mm︱feed down 65 mm/s︱feed up 375 mm/s︱working feed 17 mm/s︱oil volume 350 l︱power requirement 18,5 kW︱Weight 9,0 t︱dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 650 mm
            throat 380 mm
            dayligth 950 mm
            table surface area 800 x 700 mm
            table height over floor 920 mm
            ram surface 630 x 600 mm
            feed down 65 mm/s
            feed up 375 mm/s
            working feed 17 mm/s
            oil volume 350 l
            power requirement 18,5 kW
            Weight 9,0 t
            dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 100


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15292 · Single Column Press - Hydraulic

          DUNKES - HZ 100 - - 1978 -

          Technical details
          pressure 100 t︱throat 380 mm︱stroke 400 mm︱power capacity 22 kW︱dayligth 600 mm︱ram surface 600x500 mm︱table surface area 720x600 mm︱weight of the machine ca. 9 t︱
            pressure 100 t
            throat 380 mm
            stroke 400 mm
            power capacity 22 kW
            dayligth 600 mm
            ram surface 600x500 mm
            table surface area 720x600 mm
            weight of the machine ca. 9 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES ESPZ 63/28


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-846 · Single Column Press - Hydraulic

          DUNKES - ESPZ 63/28 - - 1977 -

          Technical details
          pressure 63 t︱stroke 650 mm︱throat 380 mm︱table surface area 650 x 1000 mm︱ram surface 650 x 1000 mm︱dayligth 850 mm︱die cushion stroke 220 mm︱die cushion area 500 x 520 mm︱die cushion capacity 25 t︱ram stroke speed - under load Vorlauf 400 mm/sec︱ram stroke speed Rücklauf 330 mm/sec︱drawing speed Auf 220 mm/sec︱drawing speed Ab 300 mm/sec︱working height (floor - top of table) 1050 mm︱total power requirement 18,5 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 1,2 x 2,2 x 3,6 m︱
          - die cushion
            pressure 63 t
            stroke 650 mm
            throat 380 mm
            table surface area 650 x 1000 mm
            ram surface 650 x 1000 mm
            dayligth 850 mm
            die cushion stroke 220 mm
            die cushion area 500 x 520 mm
            die cushion capacity 25 t
            ram stroke speed - under load Vorlauf 400 mm/sec
            ram stroke speed Rücklauf 330 mm/sec
            drawing speed Auf 220 mm/sec
            drawing speed Ab 300 mm/sec
            working height (floor - top of t. 1050 mm
            total power requirement 18,5 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 1,2 x 2,2 x 3,6 m
            Description :
            - die cushion


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact

          Straightening Press - Single Column

          used Presses Straightening Press - Single Column DUNKES HZT 6,3


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23017 · Straightening Press - Single Column

          DUNKES - HZT 6,3 - - 1993 -

          Technical details
          pressure 6,3 t︱throat 260 mm︱stroke 300 mm︱table surface area 450 x 450 mm︱total power requirement kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,0 x 0,8 x 2,2 m︱
            pressure 6,3 t
            throat 260 mm
            stroke 300 mm
            table surface area 450 x 450 mm
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,0 x 0,8 x 2,2 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Single Column DUNKES HR 16


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-203008 · Straightening Press - Single Column

          DUNKES - HR 16 - - 1989 - konventionell

          Technical details
          pressure 16 t︱throat 200 mm︱stroke 160 mm︱dayligth 490 mm︱table surface area 1300 (3300) x 250 mm︱table height over floor 935 mm︱ram surface 65 mm︱oil volume l︱power requirement 4,0 kW︱weight of the machine ca. 2,2 t︱required space 1,4 (5,4) x 1,3 x 2,4 m︱
          with oilhydraulic drive, shaft straightening device length of straightening table approx. 1300 + 2x2000 mm can be inspected in running condition in our warehouse
            pressure 16 t
            throat 200 mm
            stroke 160 mm
            dayligth 490 mm
            table surface area 1300 (3300) x 250 mm
            table height over floor 935 mm
            ram surface 65 mm
            power requirement 4,0 kW
            weight of the machine ca. 2,2 t
            required space 1,4 (5,4) x 1,3 x 2,4 m
            Description :
            with oilhydraulic drive, shaft straightening device
            length of straightening table approx. 1300 + 2x2000 mm
            can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Straightening Press - Single Column DUNKES HR 40


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-203009 · Straightening Press - Single Column

          DUNKES - HR 40 - - 1975 - konventionell

          Technical details
          pressure 40 t︱throat 280 mm︱stroke 160 mm︱dayligth 420 mm︱table surface area 2000 x 500 mm︱table height over floor 870 mm︱ram surface 85 mm︱oil volume l︱power requirement 7,5 kW︱weight of the machine ca. 3,2 t︱required space 1,7 x 2,0 x 2,3 m︱
          with oilhydraulic drive, shaft straightening device can be inspected in running condition in our warehouse
            pressure 40 t
            throat 280 mm
            stroke 160 mm
            dayligth 420 mm
            table surface area 2000 x 500 mm
            table height over floor 870 mm
            ram surface 85 mm
            power requirement 7,5 kW
            weight of the machine ca. 3,2 t
            required space 1,7 x 2,0 x 2,3 m
            Description :
            with oilhydraulic drive, shaft straightening device
            can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Tryout Press - hydraulic

          used Presses Tryout Press - hydraulic DUNKES HS2-40 / 160T


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3370013 · Tryout Press - hydraulic

          DUNKES - HS2-40 / 160T - - 1997 -

          Technical details
          pressure 160 t︱stroke 300 mm︱table surface area 800 x 420 mm︱dayligth 742 mm︱rapid drop speed 150 mm/sec︱work speed 0 - 15 mm/sec︱return speed 300 mm/sec︱dimensions 1700 x 1000 x 1680 mm︱total power requirement 17 kW︱weight of the machine ca. 5,7 t︱
          - Adjustable pressing speed - EC declaration of conformity and documentation
            pressure 160 t
            stroke 300 mm
            table surface area 800 x 420 mm
            dayligth 742 mm
            rapid drop speed 150 mm/sec
            work speed 0 - 15 mm/sec
            return speed 300 mm/sec
            dimensions 1700 x 1000 x 1680 mm
            total power requirement 17 kW
            weight of the machine ca. 5,7 t
            Description :
            - Adjustable pressing speed
            - EC declaration of conformity and documentation


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic DUNKES HZ 63


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3370011 · Tryout Press - hydraulic

          DUNKES - HZ 63 - - 1994 -

          Technical details
          pressure 63 t︱stroke 617 mm︱table surface area 800 x 550 mm︱dayligth 1012 mm︱throat 320 mm︱rapid drop speed 105 mm/sec︱work speed 13 mm/sec︱return speed max. 416 mm/sec︱dimensions of the machine ca. 1350 x 1950 x 4750 mm︱total power requirement 20 kW︱weight of the machine ca. 6,5 t︱
          Hydraulic single-column press, C-column press - Working speed lower stroke switching, infinitely adjustable via limit switch - Pressing force continuously adjustable (10-100%) - Axial piston pump - Lower stroke switch, infinitely adjustable via limit switch *Transportation dimensions: length 4750 x width 1950 x height 1350mm (Machine is laid down for transport) *Machine is sold without oil filling
            pressure 63 t
            stroke 617 mm
            table surface area 800 x 550 mm
            dayligth 1012 mm
            throat 320 mm
            rapid drop speed 105 mm/sec
            work speed 13 mm/sec
            return speed max. 416 mm/sec
            dimensions of the machine ca. 1350 x 1950 x 4750 mm
            total power requirement 20 kW
            weight of the machine ca. 6,5 t
            Description :
            Hydraulic single-column press, C-column press

            - Working speed lower stroke switching, infinitely adjustable via
            limit switch
            - Pressing force continuously adjustable (10-100%)
            - Axial piston pump
            - Lower stroke switch, infinitely adjustable via limit switch

            *Transportation dimensions: length 4750 x width 1950 x height 1350mm
            (Machine is laid down for transport)

            *Machine is sold without oil filling


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •