.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Honing Machine - Internal - Horizontal

          Machinelist: Honing Machine - Internal - Horizontal


          Honing Machine - Internal - Horizontal

          used Lapping machines Honing Machine - Internal - Horizontal SUNNEN MBB-1660


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4952 · Honing Machine - Internal - Horizontal

          SUNNEN - MBB-1660 - - Unbekannt -

          Technical details
          honing length max. -400 mm︱honing diameter 1.5-165 mm︱automatic ︱turning speeds: ︱number 12 ︱reus 200-2500 U/min︱weight of the machine ca. 540 kg︱dimensions of the machine ca. 800x1400x1600 mm︱Tool presetter device PG-400-EM ︱Measurment device PG-800-EM ︱Coolant installation
            honing length max. -400 mm
            honing diameter 1.5-165 mm
            number 12
            reus 200-2500 U/min
            weight of the machine ca. 540 kg
            dimensions of the machine ca. 800x1400x1600 mm
            Tool presetter device PG-400-EM
            Measurment device PG-800-EM


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lapping machines Honing Machine - Internal - Horizontal SUNNEN ML 5000


          • KARAT Werkzeugmaschinen GmbH
          • Lily-Braun-Straße 45
          • 40699 Erkrath
          • Deutschland

          • 02104 / 138 59 30
            02104 / 138 59 31
          • info@karat-maschinen.de
            www.karat-maschinen.de
          #1097-10152 · Honing Machine - Internal - Horizontal

          SUNNEN - ML 5000 - - 2005 -

          Technical details
          honing diameter 1,5 - 165 mm︱length of stroke min./max. 6 - 170 mm︱stroke speed 60 - 500 H/min︱spindle turning speed range 200 - 3000 U/min︱spindle drive motor 4,1 kW︱connected load 10,5 KVA︱weight of the machine ca. 1 t︱range L-W-H 2 x 1,3 x 1,9 mm︱
          SUNNEN cross sanding machine with automatic lifting device in very good condition: - Diameter range (inside Ø ) - manual stroke = 1,5 - 165 mm - automatic stroke = 1.5 - 101.6 mm • infeed system: - two-stage grinding pressure (roughing & finishing in one cycle) - automatic grinding pressure regulation (SDR) - automatic sanding strips - wear compensation - Filter system for cleaning honing oil - Dimension control: - Zero bevel or ASC Machine can be inspected under power!
            honing diameter 1,5 - 165 mm
            length of stroke min./max. 6 - 170 mm
            stroke speed 60 - 500 H/min
            spindle turning speed range 200 - 3000 U/min
            spindle drive motor 4,1 kW
            connected load 10,5 KVA
            weight of the machine ca. 1 t
            range L-W-H 2 x 1,3 x 1,9 mm
            Description :
            SUNNEN cross sanding machine with automatic lifting device in very good
            condition:
            - Diameter range (inside Ø )
            - manual stroke = 1,5 - 165 mm
            - automatic stroke = 1.5 - 101.6 mm

            • infeed system:
            - two-stage grinding pressure (roughing & finishing in one cycle)
            - automatic grinding pressure regulation (SDR)
            - automatic sanding strips - wear compensation

            - Filter system for cleaning honing oil

            - Dimension control:
            - Zero bevel or ASC

            Machine can be inspected under power!


        • KARAT Werkzeugmaschinen GmbH
        • Lily-Braun-Straße 45
        • 40699 Erkrath
        • Deutschland

        • Datasheet
          Request / Contact
          used Lapping machines Honing Machine - Internal - Horizontal KADIA 2 PH 60/350 T


          • IproMac e.K.
          • Ennertsweg 38 b
          • 58675 Hemer
          • Deutschland

          • +49 (0) 170 27 32 014
          • w.schneegass@ipromac.de
            www.ipromac.de
          #2075-9020 · Honing Machine - Internal - Horizontal

          KADIA - 2 PH 60/350 T - - 1998 - Unipo upc 1500

          Technical details
          honing diameter 1-60 mm︱stroke 350 mm︱Control Unipo upc 1500 ︱centre height 350 mm︱total power requirement 21 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 4,0 X 3,5 X 3,2 m︱
          Vertical honing machine with deburring unit and measuring station Kadia 2PH 60/350 T A vertical honing machine Kadia 2PH 60/350 T is for sale. In addition to the honing function, a deburring unit and a measuring station are integrated into the machine. The machine is expected to be released in February 2024 and can be viewed under power. The machine has been serviced according to the prescribed intervals and is technically in perfect condition. Manufacturer: Kadia Production GmbH + Co Type: 2PH 60/350 T Machine number: 50/1776 Year of construction: 1998 Installation length: 4.0 m Installation width: 3.5 m Installation height: 3.2 m Transport weight: 6000 kg Machine weight: 4500 kg Hydraulic unit: 400 kg Coolant system: 600 kg Air requirement: max. 1.2 m3/h Control: Unipo upc 1500 Total connection value: approx. 21 kVA Total power requirement: 18 kW Voltage: 230/400V Frequency: 50Hz Spindle motors: Quantity: 2 ST Type: SEW DTF100L4TH Max. speed: 1400 min-1 Power: 3kW Current: 11.4 / 6.6 A Coolant pump: Type: Brinkmann TE143/200/1001/min Speed: 2850 rpm Power: 1.5 kW Current: 6.1/3.5A Bust unit: Type: SEW DT90L8/4 Speed: 700/1400 rpm Power: 0.44/0.55 kW Current: 2.1/2.2A Hydraulic pump: Type: Siemens 1LAF7163-4AA61 Speed: 1460 rpm Power: 11 kW Current: 21.5 A, Scope of application: Vertical honing Deburring Measuring and testing Accesories:
            honing diameter 1-60 mm
            stroke 350 mm
            Control Unipo upc 1500
            centre height 350 mm
            total power requirement 21 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 4,0 X 3,5 X 3,2 m
            Description :
            Vertical honing machine with deburring unit and measuring station
            Kadia 2PH 60/350 T

            A vertical honing machine Kadia 2PH 60/350 T is for sale.

            In addition to the honing function, a deburring unit and a measuring station are integrated into the machine.

            The machine is expected to be released in February 2024 and can be viewed under power.

            The machine has been serviced according to the prescribed intervals and is technically in perfect condition.

            Manufacturer: Kadia Production GmbH + Co
            Type: 2PH 60/350 T
            Machine number: 50/1776
            Year of construction: 1998
            Installation length: 4.0 m
            Installation width: 3.5 m
            Installation height: 3.2 m
            Transport weight: 6000 kg
            Machine weight: 4500 kg
            Hydraulic unit: 400 kg
            Coolant system: 600 kg
            Air requirement: max. 1.2 m3/h
            Control: Unipo upc 1500
            Total connection value: approx. 21 kVA
            Total power requirement: 18 kW
            Voltage: 230/400V
            Frequency: 50Hz
            Spindle motors:
            Quantity: 2 ST
            Type: SEW DTF100L4TH
            Max. speed: 1400 min-1
            Power: 3kW
            Current: 11.4 / 6.6 A
            Coolant pump:
            Type: Brinkmann TE143/200/1001/min
            Speed: 2850 rpm
            Power: 1.5 kW
            Current: 6.1/3.5A
            Bust unit:
            Type: SEW DT90L8/4
            Speed: 700/1400 rpm
            Power: 0.44/0.55 kW
            Current: 2.1/2.2A
            Hydraulic pump:
            Type: Siemens 1LAF7163-4AA61
            Speed: 1460 rpm
            Power: 11 kW
            Current: 21.5 A,

            Scope of application:
            Vertical honing
            Deburring
            Measuring and testing

            Accesories:


        • IproMac e.K.
        • Ennertsweg 38 b
        • 58675 Hemer
        • Deutschland

        • Datasheet
          Request / Contact
          used Lapping machines Honing Machine - Internal - Horizontal DELAPENA Speedhone EA


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-210102 · Honing Machine - Internal - Horizontal

          DELAPENA - Speedhone EA - - 1992 -

          Technical details
          honing diameter 79,375 mm︱stroke 150 mm︱centre height mm︱spindle turning speed - stepless 200-2500 U/min︱stroke speed 60-350 Dop.m/min︱total power requirement 2 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. 1,5x1x1,6 m︱
            honing diameter 79,375 mm
            stroke 150 mm
            spindle turning speed - stepless 200-2500 U/min
            stroke speed 60-350 Dop.m/min
            total power requirement 2 kW
            weight of the machine ca. 0,24 t
            dimensions of the machine ca. 1,5x1x1,6 m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Lapping machines Honing Machine - Internal - Horizontal GEHRING HH 12000 - 680


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17243 · Honing Machine - Internal - Horizontal

          GEHRING - HH 12000 - 680 - - 1986 -

          Technical details
          honing diameter 80 - 800 mm︱stroke 12000 mm︱centre height 1600 mm︱spindle stroke 100 - 12000 mm︱number of spindles 1 ︱stroke speed 2 - 25 m/min︱spindle turning speed - stepless 12 - 294 U/min︱bed length mm︱total power requirement ca. 50 kW︱weight of the machine ca. 30 t︱dimensions of the machine ca. 26,5 x 3,7 x 2,5 m︱
          with hydr. feed and control system Electro-hydr. adjusting device Machine bed Workpiece bed
            honing diameter 80 - 800 mm
            stroke 12000 mm
            centre height 1600 mm
            spindle stroke 100 - 12000 mm
            number of spindles 1
            stroke speed 2 - 25 m/min
            spindle turning speed - stepless 12 - 294 U/min
            total power requirement ca. 50 kW
            weight of the machine ca. 30 t
            dimensions of the machine ca. 26,5 x 3,7 x 2,5 m
            Description :
            with hydr. feed and control system
            Electro-hydr. adjusting device

            Machine bed
            Workpiece bed


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lapping machines Honing Machine - Internal - Horizontal SUNNEN 1804


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06551 · Honing Machine - Internal - Horizontal

          SUNNEN - 1804 - - 1984 -

          Technical details
          honing diameter . mm︱stroke . mm︱centre height mm︱weight of the machine ca. 530 KG︱dimensions of the machine ca. Ca. 1610 x 1600 x 1575 mm︱
            honing diameter . mm
            stroke . mm
            weight of the machine ca. 530 KG
            dimensions of the machine ca. Ca. 1610 x 1600 x 1575 mm


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lapping machines Honing Machine - Internal - Horizontal HONMAK HMS 3000 SO


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38701 · Honing Machine - Internal - Horizontal

          HONMAK - HMS 3000 SO - - -

          Technical details
          honing diameter / mm︱stroke 3000 mm︱centre height / mm︱-------------------------------------------------- ︱WORKING RANGE -HONING- ︱- stroke max. 3000 mm︱WORKING RANGE -INTERNAL HONING- ︱- diameter min. 100 mm︱- diameter max. 400 mm︱- . to 150 /min︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 11 kW︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 9000 mm︱- space requirements -front/back- 1700 mm︱- total height 1250 mm︱weight 6 t︱
            honing diameter / mm
            stroke 3000 mm
            centre height / mm
            - stroke max. 3000 mm
            - diameter min. 100 mm
            - diameter max. 400 mm
            - . to 150 /min
            - total power consumption 11 kW
            - space requirements -left/right. 9000 mm
            - space requirements -front/back. 1700 mm
            - total height 1250 mm
            weight 6 t


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          SUNNEN - DELAPENA - KADIA - GEHRING - HONMAK -