.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Section Bender

          Machinelist: Section Bender


          Section Bender

          used Sheet metal working / shaeres / bending Section Bender AKYAPAK APK 61


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2360009 · Section Bender

          AKYAPAK - APK 61 - - NEU -

          Technical details
          I - beam section - flat steel 80 x 20 (d 1200) mm︱I-beam section - upend 80 x 25 (d 2100) mm︱L-beam 50 x 50 x 6 (d 1000) mm︱bar material - diameter 40,0 (d 800) mm︱tube diameter 70 x 2 (d 1600) mm︱square material 60x60x3 (d 4000) mm︱total power requirement 4,75 kW︱weight of the machine ca. 1080 kg︱dimensions of the machine ca. 0,95 x 1,4 x 1,45 mm︱
          - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German
            I - beam section - flat steel 80 x 20 (d 1200) mm
            I-beam section - upend 80 x 25 (d 2100) mm
            L-beam 50 x 50 x 6 (d 1000) mm
            bar material - diameter 40,0 (d 800) mm
            tube diameter 70 x 2 (d 1600) mm
            square material 60x60x3 (d 4000) mm
            total power requirement 4,75 kW
            weight of the machine ca. 1080 kg
            dimensions of the machine ca. 0,95 x 1,4 x 1,45 mm
            Description :
            - hydraulic roller drive
            - Planetary gear delivery of the 2 lower rollers
            - for extra small bending radii
            - hardened tool holder (42CrMo4)
            - Standard roller set, hardened
            - lateral straightening rollers
            - mobile control panel
            - 3 powered rollers
            - Digital display
            - Machine can be used horizontally and vertically
            - CE mark / declaration of conformity
            - User manual in German


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AKYAPAK APK 81


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2360008 · Section Bender

          AKYAPAK - APK 81 - - NEU -

          Technical details
          I - beam section - flat steel 120 x 30 (d600) mm︱I-beam section - upend 100 x 20 (d2100) mm︱L-beam 80x80x8 (d2000) mm︱bar material - diameter 60 (d1000) mm︱tube diameter 100 x 3 (d3000) mm︱square material 50x25x2 (d600) mm︱total power requirement 5,5 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 1240 x 1375 x 1540 mm︱
          Furnishing: - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - Hydraulically adjustable side straightening rollers - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German Special accessories included in the price: - hydraulic side roller adjustment
            I - beam section - flat steel 120 x 30 (d600) mm
            I-beam section - upend 100 x 20 (d2100) mm
            L-beam 80x80x8 (d2000) mm
            bar material - diameter 60 (d1000) mm
            tube diameter 100 x 3 (d3000) mm
            square material 50x25x2 (d600) mm
            total power requirement 5,5 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 1240 x 1375 x 1540 mm
            Description :
            Furnishing:
            - hydraulic roller drive
            - Planetary gear delivery of the 2 lower rollers
            - for extra small bending radii
            - hardened tool holder (42CrMo4)
            - Standard roller set, hardened
            - Hydraulically adjustable side straightening rollers
            - mobile control panel
            - 3 powered rollers
            - Digital display
            - Machine can be used horizontally and vertically
            - CE mark / declaration of conformity
            - User manual in German

            Special accessories included in the price:
            - hydraulic side roller adjustment


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AKYAPAK APK 45


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7089 · Section Bender

          AKYAPAK - APK 45 - - NEU -

          Technical details
          I - beam section - flat steel 80 x 15 (d600) mm︱I-beam section - upend 60 x 10 (d800) mm︱L-beam 45 x 5 (d600) mm︱bar material - diameter 35,0 (d700) mm︱tube diameter 60 x 2,0 (d1000) mm︱square material 45x45x3,0 mm︱total power requirement 2,25 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 780 x 950 x 1450 mm︱
          - higher speed 6.6m/min - l-steel flat 80x15 (d600)mm - l-steel on edge 60x10 (d800) mm - Angle steel 45x5 (d600) mm - Solid material Ø 35.0 (d700) mm - Pipe diameter max. 60x2.0 (d1000) mm - Square material 45x45x3.0 mm
            I - beam section - flat steel 80 x 15 (d600) mm
            I-beam section - upend 60 x 10 (d800) mm
            L-beam 45 x 5 (d600) mm
            bar material - diameter 35,0 (d700) mm
            tube diameter 60 x 2,0 (d1000) mm
            square material 45x45x3,0 mm
            total power requirement 2,25 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 780 x 950 x 1450 mm
            Description :
            - higher speed 6.6m/min
            - l-steel flat 80x15 (d600)mm
            - l-steel on edge 60x10 (d800) mm
            - Angle steel 45x5 (d600) mm
            - Solid material Ø 35.0 (d700) mm
            - Pipe diameter max. 60x2.0 (d1000) mm
            - Square material 45x45x3.0 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender RHTC PB 50 - 3


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-4855 · Section Bender

          RHTC - PB 50 - 3 - - NEU -

          Technical details
          angular steel - leg outwards -- mm︱double T-iron on the x-axis -- mm︱U-iron on the x-axis -- mm︱ 50 mm︱ 150 mm︱throat 120 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,36 t︱dimensions of the machine ca. 1,1 x 0,8 x 1,4 m︱
          Exhibition machine **NEW, year of construction: 2021** The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal
            angular steel - leg outwards -- mm
            double T-iron on the x-axis -- mm
            U-iron on the x-axis -- mm
            50 mm
            150 mm
            throat 120 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,36 t
            dimensions of the machine ca. 1,1 x 0,8 x 1,4 m
            Description :
            Exhibition machine **NEW, year of construction: 2021**

            The PB 50-3 is a profile bending machine with manual adjustment of
            thetoprollervia a handwheel.
            The profile bending machine can be used in vertical and horizontal working
            position and are equipped with three driven rollers. The change between two or
            three driven rollers is done simply by the side handle of the machine.

            - Manual adjustment of the top roller with a handwheel
            - Vertical and horizontal work possibility
            - 3 driven rollers
            - Supplied with a standard roller set
            - Foot pedal


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by LFSS PK 30


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-920 · Section Bender

          HESSE by LFSS - PK 30 - - 2024 -

          Technical details
          neu20249723Mai 2024, ZwischenverkaufTürkei3700 €︱ 30 mm︱ 148 mm︱ 118 mm︱ 20,75 kW︱ 2 m/min︱ 50x10 mm / 800 mm; 20x6 m80x15 mm / 700 mm; 30 x 630x30 mm / 900 mm; 10x10 Ø 30 mm / 900 mm; Ø 10 mmØ 60x1,5 mm / 1.000 mm; Ø50x30x3 mm / 1.200 mm; 4040x40x3 mm / 1.200 mm; 3040x40x5 mm / 600 mm; 30x3
          2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN or ENGLISH (sample photo) WE HAVE MORE THAN 210 REFERENCES!
            neu
            2024
            9723
            Mai 2024, Zwischenverkauf
            Türkei
            3700 €
            30 mm
            148 mm
            118 mm
            2
            0,75 kW
            2 m/min
            50x10 mm / 800 mm; 20x6 m
            80x15 mm / 700 mm; 30 x 6
            30x30 mm / 900 mm; 10x10
            Ø 30 mm / 900 mm; Ø 10 mm
            Ø 60x1,5 mm / 1.000 mm; Ø
            50x30x3 mm / 1.200 mm; 40
            40x40x3 mm / 1.200 mm; 30
            40x40x5 mm / 600 mm; 30x3
            Description :
            2 mech. driven rolls
            strong cast steel construction
            shafts made of special steel,hardened and ground
            top roll manual adjustable
            hardened universal rolls
            lateral rolls adjustable in 1 axis
            horizontal and vertical operation
            double foot pedal forfor- and backward drive
            machine and equipment accordingto the CE regulations
            user manual in GERMAN or ENGLISH

            (sample photo)

            WE HAVE MORE THAN 210 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by SAHINLER PK 35


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1023 · Section Bender

          HESSE by SAHINLER - PK 35 - - 2024 -

          Technical details
          neu20249717prompt, Zwischenverkauf vTürkei5300 €︱ 109.71 €︱ 150 mm︱ 155 mm︱ 21.5 kW︱ 4,5 m/min︱ 60x10 mm / 500 mm; 40x10 100x15 mm / 450 mm; 60 x 35x35 mm / 900 mm; 20x20 Ø 35 mm / 600 mm; Ø 30 mmØ 70x2 mm / 1.000 mm; Ø 370x30x2 mm / 1.200 mm; 5050x50x3 mm / 1.700 mm; 40
          2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!
            neu
            2024
            9717
            prompt, Zwischenverkauf v
            Türkei
            5300 €
            109.71 €
            1
            50 mm
            155 mm
            2
            1.5 kW
            4,5 m/min
            60x10 mm / 500 mm; 40x10
            100x15 mm / 450 mm; 60 x
            35x35 mm / 900 mm; 20x20
            Ø 35 mm / 600 mm; Ø 30 mm
            Ø 70x2 mm / 1.000 mm; Ø 3
            70x30x2 mm / 1.200 mm; 50
            50x50x3 mm / 1.700 mm; 40
            Description :
            2 mech. driven rolls
            strong cast steel construction
            shafts made of special steel,hardened and ground
            top roll manual adjustable
            hardened universal rolls
            lateral rolls adjustable in 1 axis
            horizontal and vertical operation
            double foot pedal forfor- and backward drive
            machine and equipment accordingto the CE regulations
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 210 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by SAHINLER HPK 50


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1021 · Section Bender

          HESSE by SAHINLER - HPK 50 - - 2024 -

          Technical details
          neu20249718prompt, Zwischenverkauf vTürkei9500 €︱ 196.65 €︱ 150 mm︱ 152 mm︱ 162 mm︱ 31.1 kW︱ 4,5 m/min︱ 60x10 mm / 600 mm; 20x10 100x15 mm / 600 mm; 50 x 35x35 mm / 600 mm; 15x15 35 mm / 600 mm; Dm. 20 mm70x2 mm / 1200 mm; Dm. 2570x30x3 mm / 1500 mm; 30x
          3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!
            neu
            2024
            9718
            prompt, Zwischenverkauf v
            Türkei
            9500 €
            196.65 €
            1
            50 mm
            152 mm
            162 mm
            3
            1.1 kW
            4,5 m/min
            60x10 mm / 600 mm; 20x10
            100x15 mm / 600 mm; 50 x
            35x35 mm / 600 mm; 15x15
            35 mm / 600 mm; Dm. 20 mm
            70x2 mm / 1200 mm; Dm. 25
            70x30x3 mm / 1500 mm; 30x
            Description :
            3 mech. driven rolls (brake motor)
            hardened shafts
            top roll hydraulic adjustable
            hardened universal rolls
            lateral rolls adjustable in 1 axis
            horizontal and vertical operation
            double foot pedal forfor- and backward drive
            machine and equipment accordingto the CE regulations
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 210 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by DURMA PBH 80


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1047 · Section Bender

          HESSE by DURMA - PBH 80 - - 2023 -

          Technical details
          neu20239691prompt, Zwischenverkauf vTürkei29670 €︱ 602.3 €︱ 185 mm︱ 247 mm︱ 37.5 kW︱ 80x20 mm / 500 mm; 30x10 120x30 mm / 650 mm; 50x1050x50 mm / 500 mm; 30x30 Ø 50 mm / 500 mm; Ø 20 mmØ 100x2,5 mm / 1.300 mm; 80x40x4 mm70x70x4 mm80x8 mm / 1.200 mm; 30x3
          3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation Control console forfor- andbackward drive machine and equipment according to theCE regulations INCL. OPTION: CONTINUOUS SPEED WE HAVE MORE THAN 235 REFERENCES!
            neu
            2023
            9691
            prompt, Zwischenverkauf v
            Türkei
            29670 €
            602.3 €
            1
            85 mm
            247 mm
            3
            7.5 kW
            80x20 mm / 500 mm; 30x10
            120x30 mm / 650 mm; 50x10
            50x50 mm / 500 mm; 30x30
            Ø 50 mm / 500 mm; Ø 20 mm
            Ø 100x2,5 mm / 1.300 mm;
            80x40x4 mm
            70x70x4 mm
            80x8 mm / 1.200 mm; 30x3
            Description :
            3 driven rolls (hydromotor and planetary gear)
            strong welded steel construction
            lower rolls hydr. adjustable
            digital read-out for lower rolls positions
            plane rolls
            lateral rolls (forward-backward hydraulic, rest manual)
            horizontal and vertical operation
            Control console forfor- andbackward drive
            machine and equipment according to theCE regulations
            INCL. OPTION: CONTINUOUS SPEED

            WE HAVE MORE THAN 235 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by DURMA PBH 60


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1765 · Section Bender

          HESSE by DURMA - PBH 60 - - 2023 -

          Technical details
          neu20239670prompt, Zwischenverkauf vTürkei18100 €︱ 371.05 €︱ 160 mm︱ 177 mm︱ 33.7 kW︱ 6 m/min︱ 70x10 mm / 600 mm; 30x10 90x25 mm / 500 mm; 50x5 m40x40 mm / 500 mm; 20x20 Ø. 40 mm / 500 mm; Ø 20 mØ 60x2 mm / 600 mm; Ø 20x80x40x3 mm60x60x4 mm
          3 driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel plane and hardened universal rolls lateral rolls adjustablein 3 axes manual/hydr. horizontal and vertical operation for- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 235 REFERENCES!
            neu
            2023
            9670
            prompt, Zwischenverkauf v
            Türkei
            18100 €
            371.05 €
            1
            60 mm
            177 mm
            3
            3.7 kW
            6 m/min
            70x10 mm / 600 mm; 30x10
            90x25 mm / 500 mm; 50x5 m
            40x40 mm / 500 mm; 20x20
            Ø. 40 mm / 500 mm; Ø 20 m
            Ø 60x2 mm / 600 mm; Ø 20x
            80x40x3 mm
            60x60x4 mm
            Description :
            3 driven rolls
            strong welded steel construction
            lower rolls hydr. adjustable
            digital read-out for lower rollspositions on seperate control panel
            plane and hardened universal rolls
            lateral rolls adjustablein 3 axes manual/hydr.
            horizontal and vertical operation
            for- and backward drive
            machine and equipment accordingto the CE regulations
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 235 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender STÖLTING PBMS 100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5837 · Section Bender

          STÖLTING - PBMS 100 - - 2014 -

          Technical details
          plate thickness 140 x 30 mm︱roll diameter 540 mm︱bending speed 0 - 5 m/min︱total power requirement 22 kW︱weight of the machine ca. 9,8 t︱dimensions of the machine ca. 2600 x 2500 x 1700 m︱
          **Condition: VERY GOOD - ONLY approx. 100 operating hours** - 2 hydraulically adjustable guide rollers - Hydraulic infeed of the lower rollers - Stepless throughput speed - Planetary gears - Universal bending roll set - hydraulic Delivery of the front roller - Colorable control panel with digital display of the actual position of the lower rollers
            plate thickness 140 x 30 mm
            roll diameter 540 mm
            bending speed 0 - 5 m/min
            total power requirement 22 kW
            weight of the machine ca. 9,8 t
            dimensions of the machine ca. 2600 x 2500 x 1700 m
            Description :
            **Condition: VERY GOOD - ONLY approx. 100 operating hours**

            - 2 hydraulically adjustable guide rollers
            - Hydraulic infeed of the lower rollers
            - Stepless throughput speed
            - Planetary gears
            - Universal bending roll set
            - hydraulic Delivery of the front roller
            - Colorable control panel with digital display of the actual position of the
            lower rollers


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AKYAPAK APK 30


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003404 · Section Bender

          AKYAPAK - APK 30 - - 2007 -

          Technical details
          I - beam section - flat steel 50 x 10 mm︱I-beam section - upend 80 x 15 mm︱I-beam section - upend 80 x 15 mm︱L-beam 50 mm︱round material 30,0 mm︱bar material dia. max. 1 1/2" mm︱bar material - diameter 30,0 mm︱weight 185 kg︱range L-W-H 670 x 530 x 1350 mm︱square material 40 x 40 x 3 mm︱pipes 60 x 2,0 mm︱total power requirement 0,75 kW︱
          Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided)
            I - beam section - flat steel 50 x 10 mm
            I-beam section - upend 80 x 15 mm
            I-beam section - upend 80 x 15 mm
            L-beam 50 mm
            round material 30,0 mm
            bar material dia. max. 1 1/2" mm
            bar material - diameter 30,0 mm
            weight 185 kg
            range L-W-H 670 x 530 x 1350 mm
            square material 40 x 40 x 3 mm
            pipes 60 x 2,0 mm
            total power requirement 0,75 kW
            Description :
            Equipment:
            • Base frame of the machine
            • Foot switch
            • Standard-rolls (divided)


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender ERCOLINA CE40MR2


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9401270 · Section Bender

          ERCOLINA - CE40MR2 - - 2006 -

          Technical details
          I - beam section - flat steel 100 x 15 (d 500) mm︱I-beam section - upend 50 x 10 (d 500) mm︱L-beam 50 x 6.0 (d 600) mm︱round material 35.0 (d 500) mm︱bar material dia. max. 60 x 2.0 (d 1200 ) mm︱square material 50x50x3 (d 1000) mm︱bending speed 10.0 U/min︱roll diam. toproll 165 mm︱bore 40.0 mm︱range L-W-H 560 x 1430 x 980 mm︱adjustment range: OW 124 mm︱total power requirement 1.85 kW︱weight 273 kg︱
          ** from a chamber of crafts / little used (!!) ** Manufacturer new price including accessories approx. 12.500 euros ** Special price on request Furnishing: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x driven rollers (MR2 model series) - divided roller segments - digital position display of the top roller (0.1 mm) - manual top roller adjustment - R/L running of the bending rollers - Bending speed 20% higher than machines of the same class - Shafts made of forged & ground chrome-nickel steel - Machine base - Horizontal and vertical work possible - freely movable control panel - CE mark - Instruction manual in German * Special accessories included: - 3x ERCOLINA STEEL roller set for pipes * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401270
            I - beam section - flat steel 100 x 15 (d 500) mm
            I-beam section - upend 50 x 10 (d 500) mm
            L-beam 50 x 6.0 (d 600) mm
            round material 35.0 (d 500) mm
            bar material dia. max. 60 x 2.0 (d 1200 ) mm
            square material 50x50x3 (d 1000) mm
            bending speed 10.0 U/min
            roll diam. toproll 165 mm
            bore 40.0 mm
            range L-W-H 560 x 1430 x 980 mm
            adjustment range: OW 124 mm
            total power requirement 1.85 kW
            weight 273 kg
            Description :
            ** from a chamber of crafts / little used (!!)
            ** Manufacturer new price including accessories approx. 12.500 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic ring/profile bending machine
            - heavy and robust machine body
            - 2x driven rollers (MR2 model series)
            - divided roller segments
            - digital position display of the top roller (0.1 mm)
            - manual top roller adjustment
            - R/L running of the bending rollers
            - Bending speed 20% higher than machines of the same class
            - Shafts made of forged & ground chrome-nickel steel
            - Machine base
            - Horizontal and vertical work possible
            - freely movable control panel
            - CE mark
            - Instruction manual in German

            * Special accessories included:
            - 3x ERCOLINA STEEL roller set for pipes

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401270


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender SCHÄFER SPVS 65 / 140


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6505 · Section Bender

          SCHÄFER - SPVS 65 / 140 - - 1990 -

          Technical details
          I - beam section - flat steel 140 x 140 x 13 mm︱I-beam section - upend 120 x 120 x 13 mm︱L-beam 130 x 130 x 12 mm︱round bar steel 85 mm︱bending capacity - flat iron 125 25 mm︱flat steel 65 x 65 mm︱
          including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)
            I - beam section - flat steel 140 x 140 x 13 mm
            I-beam section - upend 120 x 120 x 13 mm
            L-beam 130 x 130 x 12 mm
            round bar steel 85 mm
            bending capacity - flat iron 125 25 mm
            flat steel 65 x 65 mm
            Description :
            including various rollers:
            Pipe Ø:
            219 mm (tool/roller Ø 535 mm)
            140 mm (tool/roller Ø 420 mm)
            273 mm (tool/roller Ø 520 mm)
            203mm
            168.3 mm (tool/roller Ø 500 mm)
            75 mm (tool/roller Ø 400 mm)
            49 mm (tool/roller Ø 420 mm)
            48.3 mm (tool/roller Ø 420 mm)
            22.5 mm (tool/roller Ø 420 mm)
            32/32.5 mm (tool/roller Ø 420 mm)
            60 mm (tool/roller Ø 420 mm)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HAEUSLER HPR 12 mech. asym. - V+H


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11966 · Section Bender

          HAEUSLER - HPR 12 mech. asym. - V+H - - 1976 -

          Technical details
          I-beam section - flat steel 220 bei Dm 1200 mm︱I-beam section - upend - mm︱angular steel - leg outwards 110x110x14 bei Dm 1000 mm︱angular steel - leg inwards 80x80x10 bei Dm 1000 mm︱flat steel flat 100 x 20 bei Dm 1000 mm︱T-steel / side out 120x120x13 bei Dm 1200 mm︱U-iron on the x-axis 22 bei Dm 1200 mm︱pipes 102 x 6 bei Dm 900 mm︱round material 75 bei Dm 700 mm︱square material 60 x 60 bei Dm 600 mm︱bending speed 3,5 m/min︱No. - Rolls 3 ︱Drive 7,5 kW︱shaft diameter 125/135 mm︱weight 6,4 t︱dimensions of the machine ca. 2,1 x 2,4 x 1,5 m︱Electric 380 Volt ︱Set of standard rolls I + H ︱Motorized adjustable rollers ︱Control panel
          Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers, pneum. regulation of the clutch pressure of the setting rollers, usable horizontal and vertical, optical read out. Machine dealer with own stock of 1600 m².
            I-beam section - flat steel 220 bei Dm 1200 mm
            I-beam section - upend - mm
            angular steel - leg outwards 110x110x14 bei Dm 1000 mm
            angular steel - leg inwards 80x80x10 bei Dm 1000 mm
            flat steel flat 100 x 20 bei Dm 1000 mm
            T-steel / side out 120x120x13 bei Dm 1200 mm
            U-iron on the x-axis 22 bei Dm 1200 mm
            pipes 102 x 6 bei Dm 900 mm
            round material 75 bei Dm 700 mm
            square material 60 x 60 bei Dm 600 mm
            bending speed 3,5 m/min
            No. - Rolls 3
            Drive 7,5 kW
            shaft diameter 125/135 mm
            weight 6,4 t
            dimensions of the machine ca. 2,1 x 2,4 x 1,5 m
            Set of standard rolls I + H
            Description :
            Heavy ASYMETRIC ring bending machine with mot. adjustment of both
            infeed rollers and mot. adjustment of the two lateral guide rollers, pneum.
            regulation of the clutch pressure of the setting rollers, usable horizontal and
            vertical, optical read out.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HÄUSLER HPR 12 mech.- asym - V+H


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5197 · Section Bender

          HÄUSLER - HPR 12 mech.- asym - V+H - - 1975 -

          Technical details
          angle steel/side length 120 mm︱angle steel/side length -- mm︱double T-iron on the x-axis -- mm︱double T-iron on the x-axis -- mm︱U-iron on the x-axis -- mm︱U-iron on the x-axis -- mm︱working speed 3,5 m/min︱power capacity 7,5 kW︱total power requirement ca 14 kW︱weight of the machine ca. 6,4 t︱dimensions of the machine ca. 2,1 x 2,4 x 1,5 m︱
            angle steel/side length 120 mm
            angle steel/side length -- mm
            double T-iron on the x-axis -- mm
            double T-iron on the x-axis -- mm
            U-iron on the x-axis -- mm
            U-iron on the x-axis -- mm
            working speed 3,5 m/min
            power capacity 7,5 kW
            total power requirement ca 14 kW
            weight of the machine ca. 6,4 t
            dimensions of the machine ca. 2,1 x 2,4 x 1,5 m


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AK BEND APK 50


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8404204 · Section Bender

          AK BEND - APK 50 - - -

          Technical details
          I - beam section - flat steel 80 x 16 (d 1200) mm︱I-beam section - upend 50 x 15 (d 1000) mm︱L-beam 50 x 5 (d 1200) mm︱round material 40,0 (d 800) mm︱bar material dia. max. 70 x 2,0 (d 1600 ) mm︱square material 80x30x3 (d 4000) mm︱channels - flange UNP 80 (d 800 ) mm︱bending speed 4,4 m/min︱roll diam. toproll 157 mm︱bore 50,0 mm︱total power requirement 1,1 kW︱weight 485 kg︱
          Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x manually adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German
            I - beam section - flat steel 80 x 16 (d 1200) mm
            I-beam section - upend 50 x 15 (d 1000) mm
            L-beam 50 x 5 (d 1200) mm
            round material 40,0 (d 800) mm
            bar material dia. max. 70 x 2,0 (d 1600 ) mm
            square material 80x30x3 (d 4000) mm
            channels - flange UNP 80 (d 800 ) mm
            bending speed 4,4 m/min
            roll diam. toproll 157 mm
            bore 50,0 mm
            total power requirement 1,1 kW
            weight 485 kg
            Description :
            Furnishing:
            - electro-hydraulic ring/profile bending machine
            - Hydraulic lower/side roller adjustment
            * for extra small bending radii
            - Lower/side roller can be delivered individually
            - 3x powered rollers
            - divided roller segments
            - Digital position display of the bottom/side rollers
            * Display with TouchScree function
            - hardened tool holder (42CrMo4)
            - Machine base
            - 2x manually adjustable side guides
            - Horizontal and vertical work possible
            - freely movable control panel
            - Pressure gauge / pressure indicator for the rollers
            - CE mark / declaration of conformity
            - User manual in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AK BEND APK 101


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8405559 · Section Bender

          AK BEND - APK 101 - - -

          Technical details
          I-beam section - upend 120 x 25 (d 1600) mm︱bar material dia. max. 140 x 3 (d 3000) mm︱L-beam 100x100x10 (d 1600) mm︱square material 140 x 40 x 3 (d 4000) mm︱I - beam section - flat steel 200 x 35 (d 1000) mm︱bar material - diameter 70,0 (d 800) mm︱tool taper 100,0 mm︱0 315 mm︱turning speeds 5,4 m/min.︱total power requirement 11,0 kW︱weight 2.240 kg︱range L-W-H 1500 x 1650 x 2100 mm︱
          Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x hydraulically adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German
            I-beam section - upend 120 x 25 (d 1600) mm
            bar material dia. max. 140 x 3 (d 3000) mm
            L-beam 100x100x10 (d 1600) mm
            square material 140 x 40 x 3 (d 4000) mm
            I - beam section - flat steel 200 x 35 (d 1000) mm
            bar material - diameter 70,0 (d 800) mm
            tool taper 100,0 mm
            0 315 mm
            turning speeds 5,4 m/min.
            total power requirement 11,0 kW
            weight 2.240 kg
            range L-W-H 1500 x 1650 x 2100 mm
            Description :
            Furnishing:
            - electro-hydraulic ring/profile bending machine
            - Hydraulic lower/side roller adjustment
            * for extra small bending radii
            - Lower/side roller can be delivered individually
            - 3x powered rollers
            - divided roller segments
            - Digital position display of the bottom/side rollers
            * Display with TouchScree function
            - hardened tool holder (42CrMo4)
            - Machine base
            - 2x hydraulically adjustable side guides
            - Horizontal and vertical work possible
            - freely movable control panel
            - Pressure gauge / pressure indicator for the rollers
            - CE mark / declaration of conformity
            - User manual in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AK BEND APK 61


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8404430 · Section Bender

          AK BEND - APK 61 - - -

          Technical details
          I - beam section - flat steel 80 x 20 (d 1200) mm︱I-beam section - upend 80 x 25 (d 2100) mm︱L-beam 50 x 50 x 6 (d 1000) mm︱bar material - diameter 40,0 (d 800) mm︱square material 60x60x3 ( d 4000 ) mm︱rectangle 80x30x3 ( d 6000 ) mm︱roll surface width 177x60 (18x5 Nut) mm︱tool adaptor 60 mm︱range L-W-H 940 x 1260 x 1390 mm︱bar material dia. max. 70 x 2 (d 1600) mm︱turning speeds 6,4 m/min.︱total power requirement 4,75 kW︱weight 1080 kg︱range L-W-H 950 x 1400 x 1450 mm︱
          Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x manually adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German
            I - beam section - flat steel 80 x 20 (d 1200) mm
            I-beam section - upend 80 x 25 (d 2100) mm
            L-beam 50 x 50 x 6 (d 1000) mm
            bar material - diameter 40,0 (d 800) mm
            square material 60x60x3 ( d 4000 ) mm
            rectangle 80x30x3 ( d 6000 ) mm
            roll surface width 177x60 (18x5 Nut) mm
            tool adaptor 60 mm
            range L-W-H 940 x 1260 x 1390 mm
            bar material dia. max. 70 x 2 (d 1600) mm
            turning speeds 6,4 m/min.
            total power requirement 4,75 kW
            weight 1080 kg
            range L-W-H 950 x 1400 x 1450 mm
            Description :
            Furnishing:
            - electro-hydraulic ring/profile bending machine
            - Hydraulic lower/side roller adjustment
            * for extra small bending radii
            - Lower/side roller can be delivered individually
            - 3x powered rollers
            - divided roller segments
            - Digital position display of the bottom/side rollers
            * Display with TouchScree function
            - hardened tool holder (42CrMo4)
            - Machine base
            - 2x manually adjustable side guides
            - Horizontal and vertical work possible
            - freely movable control panel
            - Pressure gauge / pressure indicator for the rollers
            - CE mark / declaration of conformity
            - User manual in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AK BEND APK 30


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-840456 · Section Bender

          AK BEND - APK 30 - - -

          Technical details
          L-beam 40 x 5 (d 500) mm︱I - beam section - flat steel 80 x 15 (d 700) mm︱I-beam section - upend 50 x 10 (d 800) mm︱round material 30,0 (d 700) mm︱bar material dia. max. 60 x 2 (d 1200) mm︱square material 50 x 30 x 3 mm︱range L-W-H 670 x 530 x 1350 mm︱weight 185 kg︱total power requirement 0,75 kW︱
          Furnishing: - Robust electro-motor ring/profile bending machine - Horizontal and vertical work possible * Machine head foldable by 90° - 1x free moving footswitch - segmented standard rollers (divided) - 2x motor driven rollers - manual delivery of the top roller - analogue position display of the top rollers (scale) - manually adjustable lateral/straightening rollers - CE mark / declaration of conformity - User manual in German
            L-beam 40 x 5 (d 500) mm
            I - beam section - flat steel 80 x 15 (d 700) mm
            I-beam section - upend 50 x 10 (d 800) mm
            round material 30,0 (d 700) mm
            bar material dia. max. 60 x 2 (d 1200) mm
            square material 50 x 30 x 3 mm
            range L-W-H 670 x 530 x 1350 mm
            weight 185 kg
            total power requirement 0,75 kW
            Description :
            Furnishing:
            - Robust electro-motor ring/profile bending machine
            - Horizontal and vertical work possible
            * Machine head foldable by 90°
            - 1x free moving footswitch
            - segmented standard rollers (divided)
            - 2x motor driven rollers
            - manual delivery of the top roller
            - analogue position display of the top rollers (scale)
            - manually adjustable lateral/straightening rollers
            - CE mark / declaration of conformity
            - User manual in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AK BEND APK 81


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-840421 · Section Bender

          AK BEND - APK 81 - - -

          Technical details
          I-beam section - upend 100 x 20 (d 2100) mm︱bar material dia. max. 100 x 3 (d 3000) mm︱L-beam 80x80x8 (d 2000) mm︱square material 50 x 25 x 2 (d 600) mm︱I - beam section - flat steel 120 x 30 (d 600) max.140b mm︱bar material - diameter 60,0 (d 1000) mm︱tool taper 80,0 mm︱turning speeds 4,2 m/min.︱weight 1.600 kg︱range L-W-H 1240 x 1375 x 1540 mm︱
          Ausstattung: - elektro-hydraulische Ring-/Profilbiegemaschine - hydraulische Unter-/Seitenwalzenverstellung * für extra kleine Biegeradien - Unter-/Seitenwalze einzel zustellbar - 3x angetriebene Walzen - geteile Walzensegmente - digitale Positionsanzeige der Unter-/Seitenwalzen * Anzeige mit TouchScree Funktion - gehärtete Werkzeugaufnahme (42CrMo4) - Maschinenuntergestell - 2x hydraulisch zustellbare Seitenführungen - horizontaler und vertikaler Arbeitseinsatz möglich - freibewegliches Bedienpult - Manometer / Druckanzeige für die Walzen - CE-Zeichen / Konformitätserklärung - Bedienungsanleitung auf Deutsch
            I-beam section - upend 100 x 20 (d 2100) mm
            bar material dia. max. 100 x 3 (d 3000) mm
            L-beam 80x80x8 (d 2000) mm
            square material 50 x 25 x 2 (d 600) mm
            I - beam section - flat steel 120 x 30 (d 600) max.140b mm
            bar material - diameter 60,0 (d 1000) mm
            tool taper 80,0 mm
            turning speeds 4,2 m/min.
            weight 1.600 kg
            range L-W-H 1240 x 1375 x 1540 mm
            Description :
            Ausstattung:
            - elektro-hydraulische Ring-/Profilbiegemaschine
            - hydraulische Unter-/Seitenwalzenverstellung
            * für extra kleine Biegeradien
            - Unter-/Seitenwalze einzel zustellbar
            - 3x angetriebene Walzen
            - geteile Walzensegmente
            - digitale Positionsanzeige der Unter-/Seitenwalzen
            * Anzeige mit TouchScree Funktion
            - gehärtete Werkzeugaufnahme (42CrMo4)
            - Maschinenuntergestell
            - 2x hydraulisch zustellbare Seitenführungen
            - horizontaler und vertikaler Arbeitseinsatz möglich
            - freibewegliches Bedienpult
            - Manometer / Druckanzeige für die Walzen
            - CE-Zeichen / Konformitätserklärung
            - Bedienungsanleitung auf Deutsch


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AK BEND APK 35


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-840422 · Section Bender

          AK BEND - APK 35 - - -

          Technical details
          I - beam section - flat steel 120 x 15 (d 750) mm︱I-beam section - upend 60 x 10 (d 800) mm︱L-beam 50 x 5 (d 1200) mm︱round material 35,0 (d 800) mm︱bar material dia. max. 70 x 2 (d 1200) mm︱square material 50 x 40 x 3 mm︱bending speed 4,3 m/min︱roll diam. toproll 155 mm︱bore 50,0 mm︱total power requirement 1,5 kW︱weight 320 kg︱range L-W-H 730 x 830 x 1350 mm︱
          Furnishing: - Robust electro-motor ring/profile bending machine - Machine base, with rear shelf - Horizontal and vertical work possible - 1x free moving footswitch - segmented standard rollers (divided) - 2x motor driven rollers - manual delivery of the top roller - analogue position display of the top rollers (scale) - manually adjustable lateral/straightening rollers - CE mark / declaration of conformity - User manual in German
            I - beam section - flat steel 120 x 15 (d 750) mm
            I-beam section - upend 60 x 10 (d 800) mm
            L-beam 50 x 5 (d 1200) mm
            round material 35,0 (d 800) mm
            bar material dia. max. 70 x 2 (d 1200) mm
            square material 50 x 40 x 3 mm
            bending speed 4,3 m/min
            roll diam. toproll 155 mm
            bore 50,0 mm
            total power requirement 1,5 kW
            weight 320 kg
            range L-W-H 730 x 830 x 1350 mm
            Description :
            Furnishing:
            - Robust electro-motor ring/profile bending machine
            - Machine base, with rear shelf
            - Horizontal and vertical work possible
            - 1x free moving footswitch
            - segmented standard rollers (divided)
            - 2x motor driven rollers
            - manual delivery of the top roller
            - analogue position display of the top rollers (scale)
            - manually adjustable lateral/straightening rollers
            - CE mark / declaration of conformity
            - User manual in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by SAHINLER HPK 60


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1025 · Section Bender

          HESSE by SAHINLER - HPK 60 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei12900 €︱ 264.45 €︱ 60 mm︱ 215 mm︱ 215 mm︱ 31.5 kW︱ 4 m/min︱ 80x20 mm / 1200 mm; 40x10120x25 mm / 600 mm; 50 x 50x50 mm / 800 mm; 20x20 Ø 50 mm / 800 mm; Ø 20 mmØ 100x2 mm / 1600 mm; Ø 680x40x3 mm / 1400 mm; 40x70x3 mm / 1600 mm; 40x2 m70x70x7 mm / 1000 mm; 40x70x70x7 mm / 1200 mm; 40x
          3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES!
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            12900 €
            264.45 €
            60 mm
            215 mm
            215 mm
            3
            1.5 kW
            4 m/min
            80x20 mm / 1200 mm; 40x10
            120x25 mm / 600 mm; 50 x
            50x50 mm / 800 mm; 20x20
            Ø 50 mm / 800 mm; Ø 20 mm
            Ø 100x2 mm / 1600 mm; Ø 6
            80x40x3 mm / 1400 mm; 40x
            70x3 mm / 1600 mm; 40x2 m
            70x70x7 mm / 1000 mm; 40x
            70x70x7 mm / 1200 mm; 40x
            Description :
            3 mech. driven rolls (brake motor)
            hardened shafts
            top roll hydraulic adjustable
            hardened universal rolls
            lateral rolls adjustable in 1 axis
            horizontal and vertical operation
            double foot pedal forfor- and backward drive
            machine and equipment accordingto the CE regulations
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 260 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by SAHINLER HPK 80


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1029 · Section Bender

          HESSE by SAHINLER - HPK 80 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei22500 €︱ 461.25 €︱ 80 mm︱ 245 mm︱ 34 kW︱ 6 m/min︱ 100x20 mm / 2000 mm; 80x2125x25 mm / 600 mm; 60x5 45x45 mm / 500 mm; 15x15 Ø 50 mm / 500 mm; Ø 15 mmØ 100x2,5 mm / 1.200 mm; 80x25x3 mm / 800 mm; 25x170x70x3 mm / 1.300 mm; 2580x80x8 mm / 800 mm; 30x370x70x7 mm / 700 mm; 30x3UPN 140 / 1600 mm; UPN 12
          3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES!
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            22500 €
            461.25 €
            80 mm
            245 mm
            3
            4 kW
            6 m/min
            100x20 mm / 2000 mm; 80x2
            125x25 mm / 600 mm; 60x5
            45x45 mm / 500 mm; 15x15
            Ø 50 mm / 500 mm; Ø 15 mm
            Ø 100x2,5 mm / 1.200 mm;
            80x25x3 mm / 800 mm; 25x1
            70x70x3 mm / 1.300 mm; 25
            80x80x8 mm / 800 mm; 30x3
            70x70x7 mm / 700 mm; 30x3
            UPN 140 / 1600 mm; UPN 12
            Description :
            3 motor driven rolls
            strong welded steel construction
            lower rolls hydr. adjustable
            digital read-out for lower rolls positions on seperate control panel
            lateral rolls adjustable in 3 axes
            horizontal and vertical operation
            for- and backward drive
            machine and equipment according to the CE regulations

            WE HAVE MORE THAN 210 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by ISITAN 3R HPK 80


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1031 · Section Bender

          HESSE by ISITAN - 3R HPK 80 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei16500 €︱ 338.25 €︱ 80 mm︱ 260 mm︱ 37.5 kW︱ 6 m/min︱ 80x15 mm / 800 mm; 40x10 125x25 mm / 600 mm; 60x8 45x45 mm / 500 mm; 15x15 Ø 50 mm / 600 mm; Ø 15 mmØ 100x2,5 mm / 1.200 mm; 80x25x3 mm / 800 mm; 25x170x70x3 mm / 1.400 mm; 4080x80x8 mm / 800 mm; 40x480x80x8 mm / 1.000 mm; 40UPN 120 / 800 mm
          3 motor driven rolls strong welded steel construction upper roll hydr. adjustable seperate control panel with digital readout horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 260 REFERENCES!
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            16500 €
            338.25 €
            80 mm
            260 mm
            3
            7.5 kW
            6 m/min
            80x15 mm / 800 mm; 40x10
            125x25 mm / 600 mm; 60x8
            45x45 mm / 500 mm; 15x15
            Ø 50 mm / 600 mm; Ø 15 mm
            Ø 100x2,5 mm / 1.200 mm;
            80x25x3 mm / 800 mm; 25x1
            70x70x3 mm / 1.400 mm; 40
            80x80x8 mm / 800 mm; 40x4
            80x80x8 mm / 1.000 mm; 40
            UPN 120 / 800 mm
            Description :
            3 motor driven rolls
            strong welded steel construction
            upper roll hydr. adjustable
            seperate control panel with digital readout
            horizontal and vertical operation
            for- and backward drive
            machine and equipment according to the CE regulations

            WE HAVE MORE THAN 260 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •