.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Injection-moulding machines (plastic)

          Machinelist: Injection-moulding machines (plastic)


          Injection-moulding machines (plastic)

          used Injection Moulding Injection-moulding machines (plastic) KOCH Maschinentechnik GmbH Foederlanlagen-Steuerung 4-56


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230508 · Injection-moulding machines (plastic)

          KOCH Maschinentechnik GmbH - Foederlanlagen-Steuerung 4-56 - - 2017 -

          Technical details
          clamping force -- kN︱injection volume -- cm³︱screw diameter -- mm︱
          Condition: used, specification: conveyor control/material station for 4 up to 56 separators for granulate- Conveying for plastic injection moulding machine, Description: The conveyor system control SM-SPS enables in cooperation with material separators and blowers to feed up to 56 processing machines or material processing machines or material take-off points with one or more materials. several materials. Technical data: - PLC control: Siemens S7-300 - Colour touch panel: SPS4: 6" panel - The control system is designed to control the following components: - 4 -56 separators (also units equipped with level probes and filter cleaning filter cleaning) - Control of the blower or a VAkuumpump - Control of the blower relief valve - Control of a safety filter - Control of empty suction valves - Material recognition via plug, scanner or empty suction valves For further technical data, see excerpt from the operating instructions. Overall scope: - Conveyor system control - Material station with accessories (see pictures/description in the appendix) - Dryer + other accessories (see pictures) - Voltage: 3x 400V, 50/60Hz, N, PE - Control voltage: 24V DC
            clamping force -- kN
            injection volume -- cm³
            screw diameter -- mm
            Description :
            Condition: used,

            specification: conveyor control/material station
            for 4 up to 56 separators for granulate-
            Conveying for plastic injection moulding machine,

            Description:
            The conveyor system control SM-SPS enables in cooperation with
            material separators and blowers to feed up to 56 processing machines or
            material processing machines or material take-off points with one or
            more materials. several materials.

            Technical data:
            - PLC control: Siemens S7-300
            - Colour touch panel: SPS4: 6" panel
            - The control system is designed to control the following components:
            - 4 -56 separators (also units equipped with level probes and filter cleaning
            filter cleaning)
            - Control of the blower or a VAkuumpump
            - Control of the blower relief valve
            - Control of a safety filter
            - Control of empty suction valves
            - Material recognition via plug, scanner or empty suction valves

            For further technical data, see excerpt from the operating instructions.

            Overall scope:
            - Conveyor system control
            - Material station with accessories (see pictures/description in the appendix)
            - Dryer + other accessories (see pictures)

            - Voltage: 3x 400V, 50/60Hz, N, PE
            - Control voltage: 24V DC



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG multi 420-810


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230506 · Injection-moulding machines (plastic)

          DEMAG - multi 420-810 - - 2008 -

          Technical details
          clamping force 4200 kN︱injection volume 1212 /292 cm³︱screw diameter 70 /15 mm︱platen size 1200 x 1100 mm︱
          Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 4200 kN
            injection volume 1212 /292 cm³
            screw diameter 70 /15 mm
            platen size 1200 x 1100 mm
            Description :
            Condition: used,

            Specification: Horizontal 2K-injection moulding machine,
            DEMAG Multi 420/810-2300h/430
            incl. handling

            injection unit 1:
            - Screw diameter: 70 mm
            - injection volume: 1.112 cm³
            - weight: 880 g

            injection unit 2:
            - Screw diameter: 15 mm
            - injection volume: 292 cm³
            - weight: 190 g

            Clamping unit:
            - Clamping force: 1200 kN
            - Centring: 160 mm
            - Platen size: 1200 x 1100 mm
            - Mould size: 810 x 710 mm
            - Mould thickness min.: 380 mm
            - Mould thickness max.: 940 mm

            - 4 & 4 Cascades
            - 4x core pull
            - Handling: Yes

            - Voltage: 3x 400V, 50Hz, N, PE
            - Total power: 192 kW
            - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm
            - Weight approx.: 25,000 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech System 60/420-200


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230202 · Injection-moulding machines (plastic)

          DEMAG - ergotech System 60/420-200 - - 2007 -

          Technical details
          clamping force 600 kN︱injection volume 106 cm³︱screw diameter 30 mm︱platen size 590 x 600 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in production and will be available from approx. available.
            clamping force 600 kN
            injection volume 106 cm³
            screw diameter 30 mm
            platen size 590 x 600 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            type: System 60/420-200

            - Internat. Size specification: 600 - 200

            injection unit:
            - Screw diameter: 30 mm
            - L/D - ratio: 20D
            - Injection volume: 106 cm³
            - Injection pressure: 1995 bar
            - Cylinder heating: 8,3 kW

            clamping unit:
            - Clamping force: 600 kN
            - Max. opening stroke: 450 mm
            - Mould installation height: min. 250 mm
            - Max. platen distance: 700 mm
            - Mould clamping platens: 590 x 600 mm
            - Clear column distance: 420 x 420 mm

            Total machine:
            - Oil tank filling: 180 ltr.
            - Pump capacity: 22 kW
            - Voltage: 3x 400V, 50 Hz
            - total power: 30,3 kW
            - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm
            - Weight without oil approx.: 3,950 kg

            - 2x core pull

            Plant is still in production and will be available from approx.
            available.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL VC 80H/80L / 130 Combi


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200203 · Injection-moulding machines (plastic)

          ENGEL - VC 80H/80L / 130 Combi - - 2006 -

          Technical details
          clamping force 1.300 kN︱injection volume 106 / 43 cm³︱screw diameter 30 / 25 mm︱platen size 850 x 750 mm︱daylight between platens - max. 900 mm︱
            clamping force 1.300 kN
            injection volume 106 / 43 cm³
            screw diameter 30 / 25 mm
            platen size 850 x 750 mm
            daylight between platens - max. 900 mm
            Description :




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 1350 H 500 W/400 HL-2 F


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200202 · Injection-moulding machines (plastic)

          ENGEL - ES 1350 H 500 W/400 HL-2 F - - 2005 -

          Technical details
          clamping force 4.000 kN︱injection volume 735 cm³︱screw diameter 60 mm︱platen size 1.400 x 1.030 mm︱
          Condition: used, Specification: horizontal injection moulding machine, factory no: Injection unit 1: - screw diameter: 60 mm - metering stroke: 200 mm - Screw speed: 226 rpm - Injection flow: 351 cm³/sec - Injection volume: 735 cm³ - Spec. injection pressure: 1.489 bar - Spec. injection pressure increased: 2,011 bar Injection unit 2: - Screw diameter: 40 mm - Metering stroke: 140 mm - Screw speed: 400 rpm - Injection flow: 197 cm³/sec - Injection volume: 251 cm³ - Spec. injection pressure: 1.286 bar - Spec. injection pressure increased: 2.029 bar Clamping unit: - Clamping force max.: 4,000 kN - Clamping platens: 1,400 x 1030 mm - Opening stroke: 954 mm - Max. platen distance: 1,520 mm - Ejector stroke: 250 mm - Ejector force: 83.0 kN - Connected load: 193 kW - Operating hours: 93421 hours - Hydraulic core pull: 2 FAP 4 BAP Handling: ERC 84/1-E RC 100 integrated
            clamping force 4.000 kN
            injection volume 735 cm³
            screw diameter 60 mm
            platen size 1.400 x 1.030 mm
            Description :
            Condition: used,

            Specification: horizontal injection moulding machine,
            factory no:

            Injection unit 1:
            - screw diameter: 60 mm
            - metering stroke: 200 mm
            - Screw speed: 226 rpm
            - Injection flow: 351 cm³/sec
            - Injection volume: 735 cm³
            - Spec. injection pressure: 1.489 bar
            - Spec. injection pressure increased: 2,011 bar

            Injection unit 2:
            - Screw diameter: 40 mm
            - Metering stroke: 140 mm
            - Screw speed: 400 rpm
            - Injection flow: 197 cm³/sec
            - Injection volume: 251 cm³
            - Spec. injection pressure: 1.286 bar
            - Spec. injection pressure increased: 2.029 bar

            Clamping unit:
            - Clamping force max.: 4,000 kN
            - Clamping platens: 1,400 x 1030 mm
            - Opening stroke: 954 mm
            - Max. platen distance: 1,520 mm
            - Ejector stroke: 250 mm
            - Ejector force: 83.0 kN

            - Connected load: 193 kW
            - Operating hours: 93421 hours
            - Hydraulic core pull:
            2 FAP
            4 BAP

            Handling: ERC 84/1-E RC 100 integrated



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech-multi 80-420


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230503 · Injection-moulding machines (plastic)

          DEMAG - ergotech-multi 80-420 - - 2003 -

          Technical details
          clamping force 800 kN︱injection volume 106 / 42 cm³︱screw diameter 30 / 22 mm︱platen size 600 x 600 mm︱
          Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 800 kN
            injection volume 106 / 42 cm³
            screw diameter 30 / 22 mm
            platen size 600 x 600 mm
            Description :
            Condition: used,

            Specification: Horizontal 2K-injection moulding machine,

            injection unit 1:
            - Screw diameter: 30 mm
            - injection volume: 106 cm³
            - weight: 94 g

            injection unit 2:
            - Screw diameter: 22 mm
            - injection volume: 42 cm³
            - weight: 37 g

            Clamping unit:
            - Clamping force: 800 kN
            - Centring: 125 mm
            - Platen size: 600 x 600 mm
            - Mould size: 420 x 420 mm
            - Mould thickness min.: 250 mm
            - Mould thickness max.: 590 mm

            - Voltage: 3x 400V, 50Hz, N, PE
            - Total power: 42 kW
            - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm
            - Weight approx.: 5,750 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 470S-1300-350


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L240301 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 470S-1300-350 - - 2002 -

          Technical details
          clamping force 1300 kN︱injection volume -- cm³︱screw diameter 45 mm︱platen size 470 x 470 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical precision parts were produced. Regularly maintained and calibrated. Without accessories such as peripheral devices, conveyors, robots, etc. and without material hopper.
            clamping force 1300 kN
            injection volume -- cm³
            screw diameter 45 mm
            platen size 470 x 470 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            Type: Allrounder 470 S 1300-350

            Injection unit:
            - Screw diameter: 45 mm
            - Centring ring diameter: 125 mm
            - Shot weight max.: 210 g (PS)
            - Injection pressure: 1,840 bar

            Clamping unit:
            - Clamping force: 1300 kN
            - Opening stroke max.: 850 mm
            - Mould installation height: min. 275 mm
            - Mould mounting platens: 470 x 470 mm
            - Operating hours approx.: 91,000

            - Core pulls: 1x
            - Valve gate: 1x pneumatic
            - Hot runner control points: 12x
            - Temperature control unit interfaces: 6x (20 mA)
            - Conveyor belt in the machine
            - Selector unit. available
            - Release for high temperature up to 450°C
            - Communication card for ProSeS interface available
            - Robot interface available.

            Technical precision parts were produced.
            Regularly maintained and calibrated.

            Without accessories such as peripheral devices,
            conveyors, robots, etc. and without material hopper.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech pro 100-400 viva


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230504 · Injection-moulding machines (plastic)

          DEMAG - ergotech pro 100-400 viva - - 2001 -

          Technical details
          clamping force 1.000 kN︱injection volume 203 cm³︱screw diameter 40 mm︱platen size 580 x 652 mm︱
          Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 1.000 kN
            injection volume 203 cm³
            screw diameter 40 mm
            platen size 580 x 652 mm
            Description :
            Condition: used,

            Specification: Horizontal 2K-injection moulding machine,

            injection unit 1:
            - Screw diameter: 40 mm
            - injection volume: 230 cm³
            - weight: 205 g

            Clamping unit:
            - Clamping force: 1000 kN
            - Centring: 125 mm
            - Platen size: 580 x 652 mm
            - Mould size: 400 x 400 mm
            - Mould thickness min.: 250 mm
            - Mould thickness max.: 450 mm

            - 1x core pull

            - Voltage: 3x 400V, 50Hz, N, PE
            - Total power: 25 kW
            - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm
            - Weight approx.: 4,750 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech viva 80-400


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230201 · Injection-moulding machines (plastic)

          DEMAG - ergotech viva 80-400 - - 2001 -

          Technical details
          clamping force 800 kN︱injection volume 177 cm³︱screw diameter 35 mm︱platen size 580 x 580 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant is still in production and will be available from approx. available.
            clamping force 800 kN
            injection volume 177 cm³
            screw diameter 35 mm
            platen size 580 x 580 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            type: Ergotech viva 80-400

            - Internat. Size specification: 800 - 400

            injection unit:
            - Screw diameter: 35 mm
            - L/D - ratio: 20D
            - Injection volume: 177 cm³
            - Injection pressure: 2387 bar
            - Cylinder heating: 8,8 kW

            clamping unit:
            - Clamping force: 800 kN
            - Max. opening stroke: 450 mm
            - Mould installation height: min. 250 mm
            - Max. platen distance: 700 mm
            - Mould clamping platens: 580 x 580 mm
            - Clear column distance: 400 x 400 mm

            Total machine:
            - Oil tank filling: 220 ltr.
            - Pump capacity: 15 kW
            - Voltage: 3x 400V, 50 Hz, N, PE
            - total power: 23,8 kW
            - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm
            - Weight without oil approx.: 3,600 kg

            - 1x core pull

            Plant is still in production and will be available from approx.
            available.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech 150/475-440


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L201202 · Injection-moulding machines (plastic)

          DEMAG - ergotech 150/475-440 - - 1999 -

          Technical details
          clamping force -- kN︱injection volume 230 cm³︱screw diameter 40 mm︱platen size 475 x 475 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller
            clamping force -- kN
            injection volume 230 cm³
            screw diameter 40 mm
            platen size 475 x 475 mm
            Description :
            Condition: used,

            Specification: Horizontal
            injection moulding machine,

            injection unit:
            - Screw diameter: 40 mm
            - Cylinder diameter: 40 mm
            - Spraying volume: 230 cm³.

            Clamping unit:
            - tie bar distance: 475 x 475 mm
            - Operating hours approx.: 30000 h

            - Air valve
            - Core pull
            - 12-way hot runner controller




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech 650-5200-610


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230507 · Injection-moulding machines (plastic)

          DEMAG - ergotech 650-5200-610 - - 1999 -

          Technical details
          clamping force 6500 kN︱injection volume 2011 / 323 cm³︱screw diameter 80 / 45 mm︱platen size 1450 x 1350 mm︱
          Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 6500 kN
            injection volume 2011 / 323 cm³
            screw diameter 80 / 45 mm
            platen size 1450 x 1350 mm
            Description :
            Condition: used,

            Specification: Horizontal 2K-injection moulding machine,
            DEMAG ergotech 650-5200-610
            incl. handling

            injection unit 1:
            - Screw diameter: 80 mm
            - injection volume: 2.011 cm³
            - weight: 1810 g

            injection unit 2:
            - Screw diameter: 45 mm
            - injection volume: 323 cm³
            - weight: 290 g

            Clamping unit:
            - Clamping force: 6500 kN
            - Centring: 200 mm
            - Platen size: 1450 x 1350 mm
            - Mould size: 1000 x 910 mm
            - Mould thickness min.: 450 mm
            - Mould thickness max.: 950 mm

            - 2x core pull
            - Handling: Yes

            - Voltage: 3x 400V, 50Hz, N, PE
            - Total power: 245 kW
            - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm
            - Weight approx.: 36,000 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech pro 150-610


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230505 · Injection-moulding machines (plastic)

          DEMAG - ergotech pro 150-610 - - 1998 -

          Technical details
          clamping force 1500 kN︱injection volume 323 cm³︱screw diameter 45 mm︱platen size 690 x 660 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 1,500 kN - Centring: 125 mm - Platen size: 690 x 660 mm - Mould size: 475 x 475 mm - Mould thickness min.: 230 mm - Mould thickness max.: 460 mm - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE, 63A - Heating: 22 A - Motors: 41 A - Total power: 27 kW - Dimensions L/W/H: approx. 6,500 x 1,600 x 2,500 mm - Weight approx.: 9,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 1500 kN
            injection volume 323 cm³
            screw diameter 45 mm
            platen size 690 x 660 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            injection unit:
            - Screw diameter: 45 mm
            - injection volume: 323 cm³
            - weight: 290 g

            Clamping unit:
            - Clamping force: 1,500 kN
            - Centring: 125 mm
            - Platen size: 690 x 660 mm
            - Mould size: 475 x 475 mm
            - Mould thickness min.: 230 mm
            - Mould thickness max.: 460 mm

            - Handling: Yes

            - Voltage: 3x 400V, 50Hz, N, PE, 63A
            - Heating: 22 A
            - Motors: 41 A
            - Total power: 27 kW
            - Dimensions L/W/H: approx. 6,500 x 1,600 x 2,500 mm
            - Weight approx.: 9,000 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech pro 250-80


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230501 · Injection-moulding machines (plastic)

          DEMAG - ergotech pro 250-80 - - 1998 -

          Technical details
          clamping force 250 kN︱injection volume 42 cm³︱screw diameter 22 mm︱platen size 420 x 455 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 250 kN - Centring: 110 mm - Platen size: 420 x 455 mm - Mould size: 280 x 280 mm - Mould thickness min.: 160 mm - Mould thickness max.: 475 mm - Ejector/picker: Yes - Voltage: 3x 400V, 50Hz, N, PE, 36A - Total power: 16 kW - Dimensions L/W/H: approx. 3,100 x 1,050 x 1,670 mm - Weight approx.: 2,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 250 kN
            injection volume 42 cm³
            screw diameter 22 mm
            platen size 420 x 455 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            injection unit:
            - Screw diameter: 22 mm
            - injection volume: 42 cm³
            - weight: 37 g

            Clamping unit:
            - Clamping force: 250 kN
            - Centring: 110 mm
            - Platen size: 420 x 455 mm
            - Mould size: 280 x 280 mm
            - Mould thickness min.: 160 mm
            - Mould thickness max.: 475 mm

            - Ejector/picker: Yes

            - Voltage: 3x 400V, 50Hz, N, PE, 36A
            - Total power: 16 kW
            - Dimensions L/W/H: approx. 3,100 x 1,050 x 1,670 mm
            - Weight approx.: 2,000 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech pro 80-400


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230502 · Injection-moulding machines (plastic)

          DEMAG - ergotech pro 80-400 - - 1998 -

          Technical details
          clamping force 800 kN︱injection volume 231 cm³︱screw diameter 40 mm︱platen size 580 x 652 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - injection volume: 231 cm³ - weight: 205 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 450 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - Ejector/picker: Yes - Voltage: 3x 400V, 50Hz, N, PE, 70A - Total power: 28 kW - Dimensions L/W/H: approx. 3,300 x 1,400 x 1,800 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 800 kN
            injection volume 231 cm³
            screw diameter 40 mm
            platen size 580 x 652 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            injection unit:
            - Screw diameter: 40 mm
            - injection volume: 231 cm³
            - weight: 205 g

            Clamping unit:
            - Clamping force: 800 kN
            - Centring: 125 mm
            - Platen size: 580 x 652 mm
            - Mould size: 400 x 450 mm
            - Mould thickness min.: 250 mm
            - Mould thickness max.: 450 mm

            - Ejector/picker: Yes

            - Voltage: 3x 400V, 50Hz, N, PE, 70A
            - Total power: 28 kW
            - Dimensions L/W/H: approx. 3,300 x 1,400 x 1,800 mm
            - Weight approx.: 4,750 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 750/200 W/250 HL 2F


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L191105 · Injection-moulding machines (plastic)

          ENGEL - ES 750/200 W/250 HL 2F - - 1997 -

          Technical details
          clamping force 2.500 kN︱injection volume 392 cm³︱screw diameter 50 mm︱platen size 1.150 x 905 mm︱daylight between platens - max. 1.200 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, Factory No.: 30883 Injection unit 1: - Screw diameter: 50 mm - Dosing stroke: 200 mm - Screw speed: 240 rpm - Injection flow: 291 cm³/sec - Injection volume: 392 cm³ - Injection weight: 353 g - Special injection pressure: 1,430 bar - Special injection pressure increased: 1,900 bar - Nozzle path: 650 mm - Heating capacity: 15,3 kW - Number of heating zones incl. nozzle: 5 Injection unit 2: - Screw diameter: 25 mm - Dosing stroke: 140 mm - Screw speed: 480 rpm - Injection flow: 88 cm³/sec - Injection volume: 69 cm³ - Injection weight: 61 g - Special injection pressure: 2,000 bar - Special injection pressure increased: 2,400 bar - Heating capacity: 6,6 kW - Number of heating zones incl. nozzle: 6 Clamping unit: - Clamping force max.: 2,500 kN - Mounting plates BAP: 1,150 x 905 mm HL - FAP clamping plates: 1,150 x 1,030 mm - Opening stroke: 850 mm - Distance between plates max.: 1,200 mm - Ejector travel: 200 mm - Ejector force: 83.0 kN Drive: - Pump drive power: 45 kW - Operating hours: 92680 hours Handling: ERC 63/1C integrated
            clamping force 2.500 kN
            injection volume 392 cm³
            screw diameter 50 mm
            platen size 1.150 x 905 mm
            daylight between platens - max. 1.200 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            Factory No.: 30883

            Injection unit 1:
            - Screw diameter: 50 mm
            - Dosing stroke: 200 mm
            - Screw speed: 240 rpm
            - Injection flow: 291 cm³/sec
            - Injection volume: 392 cm³
            - Injection weight: 353 g
            - Special injection pressure: 1,430 bar
            - Special injection pressure increased: 1,900 bar
            - Nozzle path: 650 mm
            - Heating capacity: 15,3 kW
            - Number of heating zones incl. nozzle: 5

            Injection unit 2:
            - Screw diameter: 25 mm
            - Dosing stroke: 140 mm
            - Screw speed: 480 rpm
            - Injection flow: 88 cm³/sec
            - Injection volume: 69 cm³
            - Injection weight: 61 g
            - Special injection pressure: 2,000 bar
            - Special injection pressure increased: 2,400 bar
            - Heating capacity: 6,6 kW
            - Number of heating zones incl. nozzle: 6

            Clamping unit:
            - Clamping force max.: 2,500 kN
            - Mounting plates BAP: 1,150 x 905 mm HL
            - FAP clamping plates: 1,150 x 1,030 mm
            - Opening stroke: 850 mm
            - Distance between plates max.: 1,200 mm
            - Ejector travel: 200 mm
            - Ejector force: 83.0 kN

            Drive:
            - Pump drive power: 45 kW
            - Operating hours: 92680 hours

            Handling: ERC 63/1C integrated



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 700 / 175 STND


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200401 · Injection-moulding machines (plastic)

          ENGEL - ES 700 / 175 STND - - 1992 -

          Technical details
          clamping force 1.750 kN︱injection volume 318 cm³︱screw diameter 45 mm︱platen size 700 x 700 mm︱daylight between platens - max. 460 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL
            clamping force 1.750 kN
            injection volume 318 cm³
            screw diameter 45 mm
            platen size 700 x 700 mm
            daylight between platens - max. 460 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            Injection unit:
            - Screw diameter: 45 mm
            - Screw length L/D: 20
            - Spray volume: 318 cm³
            - Shot weight max.: 287 g
            - Special spraying pressure: 2,100 bar

            Clamping unit:
            - Max. clamping force: 1,750 kN
            - clamping plates: 700 x 700 mm
            - Opening path max.: 460 mm
            - mould installation height: 150 mm
            - Operating hours: 89217 h

            - 1x core puller
            - Handling / Robots: ENGEL



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 270 M 500-90


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L211201 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 270 M 500-90 - - 1991 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter 25 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg
            clamping force 500 kN
            injection volume -- cm³
            screw diameter 25 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: horizontal injection molding machine,
            - used

            injection unit:
            - Screw diameter: 25 mm
            - shot volume max.: -- cm³
            - injection pressure approx.: 1290 bar
            - heating zones: 4
            - Heating power: 4 kW

            clamping unit:
            - clamping force: 500 kN
            - opening stroke max.: 325 mm
            - platen distance max.: 550 mm
            - clamping platen size approx.: 400 x 400 mm
            - tie bar distance: 270 x 270 mm

            - pump motor: 15 kW
            - total power: 19 kW
            - operating voltage: 380V, 50Hz
            - Weight approx.: 1.870 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) KRAUSS-MAFFEI KM-420-2300B2/90


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L190101 · Injection-moulding machines (plastic)

          KRAUSS-MAFFEI - KM-420-2300B2/90 - - 1989 -

          Technical details
          clamping force 4200 kN︱injection volume 572 - 1716 cm³︱screw diameter 90 mm︱platen size 1040 x 1040 mm︱closing stroke 620 mm︱
            clamping force 4200 kN
            injection volume 572 - 1716 cm³
            screw diameter 90 mm
            platen size 1040 x 1040 mm
            closing stroke 620 mm


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 270 A 500-210


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L211202 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 270 A 500-210 - - 1988 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg
            clamping force 500 kN
            injection volume -- cm³
            screw diameter 30 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: horizontal injection molding machine,
            - used

            injection unit:
            - Screw diameter: 30 mm
            - shot volume max.: -- cm³
            - injection pressure approx.: 1150 bar
            - heating zones: 4
            - Heating power: 5,56 kW

            clamping unit:
            - clamping force: 500 kN
            - opening stroke max.: 325 mm
            - platen distance max.: 550 mm
            - clamping platen size approx.: 400 x 400 mm
            - tie bar distance: 270 x 270 mm

            - pump motor: 15 kW
            - total power: 20,6 kW
            - operating voltage: 380V, 50Hz
            - Weight approx.: 1.850 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 270 D 500-210


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L211204 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 270 D 500-210 - - 1986 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: horizontal injection molding machine, - used, Defect injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg System is not functional. CPU card does not control the screen. (As spare parts storage)
            clamping force 500 kN
            injection volume -- cm³
            screw diameter 30 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: horizontal injection molding machine,
            - used, Defect

            injection unit:
            - Screw diameter: 30 mm
            - shot volume max.: -- cm³
            - injection pressure approx.: 1150 bar
            - heating zones: 4
            - Heating power: 5,56 kW

            clamping unit:
            - clamping force: 500 kN
            - opening stroke max.: 325 mm
            - platen distance max.: 550 mm
            - clamping platen size approx.: 400 x 400 mm
            - tie bar distance: 270 x 270 mm

            - pump motor: 15 kW
            - total power: 20,6 kW
            - operating voltage: 380V, 50Hz
            - Weight approx.: 1.850 kg

            System is not functional. CPU card
            does not control the screen. (As spare parts storage)



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 270 A 500-210


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L211203 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 270 A 500-210 - - 1986 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg
            clamping force 500 kN
            injection volume -- cm³
            screw diameter 30 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: horizontal injection molding machine,
            - used

            injection unit:
            - Screw diameter: 30 mm
            - shot volume max.: -- cm³
            - injection pressure approx.: 1150 bar
            - heating zones: 4
            - Heating power: 5,56 kW

            clamping unit:
            - clamping force: 500 kN
            - opening stroke max.: 325 mm
            - platen distance max.: 550 mm
            - clamping platen size approx.: 400 x 400 mm
            - tie bar distance: 270 x 270 mm

            - pump motor: 15 kW
            - total power: 20,6 kW
            - operating voltage: 380V, 50Hz
            - Weight approx.: 1.850 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG ALLROUNDER 305 ECO 700-230


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L191201 · Injection-moulding machines (plastic)

          ARBURG - ALLROUNDER 305 ECO 700-230 - - 1984 -

          Technical details
          clamping force 700 kN︱injection volume 103 cm³︱screw diameter 30 mm︱platen size 432 x 310 mm︱closing stroke 650 mm︱
            clamping force 700 kN
            injection volume 103 cm³
            screw diameter 30 mm
            platen size 432 x 310 mm
            closing stroke 650 mm


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL insert 500H/200 ROTARY


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L210203 · Injection-moulding machines (plastic)

          ENGEL - insert 500H/200 ROTARY - - 12/2016 -

          Technical details
          clamping force 2000 kN︱injection volume 251 cm³︱screw diameter 40 mm︱platen size 1.050 x 900 mm︱daylight between platens - max. 880 mm︱
          Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Weight total: 14.500 kg - Operating hours approx.: 643 hours
            clamping force 2000 kN
            injection volume 251 cm³
            screw diameter 40 mm
            platen size 1.050 x 900 mm
            daylight between platens - max. 880 mm
            Description :
            Condition: used, very good condition

            Specification: Vertical injection moulding machine,
            with rotary table

            injection unit:
            - screw diameter: 40 mm
            - injection volume: 251 cm³
            - Injection flow: 244 cm³/sec
            - Spec. injection pressure: 1,300 bar
            - Spec. injection pressure increased: 2,020 bar
            - Nozzle stroke: 500 mm
            - Nozzle pressure: 51.9 kN

            Clamping unit:
            - Clamping force max.: 2,000 kN
            - Clamping platens hor. x vert. 820 x 459 mm
            - Max. platen distance: 880 mm
            - Opening stroke: 400 mm
            - Mould installation height: 480 mm
            - Ejector stroke: 105 mm
            Number of heating zones incl. nozzle: 4
            - Heating power: 9.3 kW
            - Weight clamping unit: 11,000 kg
            - Weight injection unit: 3.500 kg
            - Weight total: 14.500 kg
            - Operating hours approx.: 643 hours



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG ALLROUNDER 370C 600-250


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L231201 · Injection-moulding machines (plastic)

          ARBURG - ALLROUNDER 370C 600-250 - - 08.2000 -

          Technical details
          clamping force 600 kN︱injection volume 144 cm³︱screw diameter 35 mm︱platen size 570 x 570 mm︱closing stroke 500 mm︱
          Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 + 3x 1,300 W + 600 W - Total heating power: 6100 W Electro-hydraulic equipment: - Rated power of hydraulic motor: 11 kW - Total installed power: 19.1 kW - Electrical connection: 80 A - Hydraulic oil filling: 230 litres Dimensions and weights: - Net weight: 3,180 kg - Operating hours approx.: 90,000 Equipment: - 2x core pull - Connection for NVD mould 1x pneumatic, 1x hydraulic - 6-fold hot runner control - Piezo cavity pressure changeover - Handling interface plant is still in production and will be available from February 2024 available. Viewing is possible at any time.
            clamping force 600 kN
            injection volume 144 cm³
            screw diameter 35 mm
            platen size 570 x 570 mm
            closing stroke 500 mm
            Description :
            Condition: used

            Specification: Horizontal injection moulding machine

            clamping unit:
            - Clamping force max.: 600 kN
            - clamping platens: 570 x 570 mm
            - clear column distance: 370 x 370 mm
            - Distance between the mould mounting platens: 750 mm
            - Mould installation height: 250 mm
            - Opening stroke max.: 500 mm
            - Ejector travel hyd. Ejector stroke: 175 mm
            - Ejector force max.: 40 kN

            Injection unit:
            - Screw diameter: 35 mm
            - Screw length: 20D
            - Screw stroke max.: 150 mm
            - Max. dosing volume: 144 cm³
            - Moulded part weight: 121 g

            - Injection pressure: 1,820 bar
            - Injection flow max.: 154 cm³/s
            - Screw peripheral speed: 57 m/min
            - Screw torque max.: 440 Nm
            - Barrel and nozzle heating: 1600 + 3x 1,300 W + 600 W
            - Total heating power: 6100 W

            Electro-hydraulic equipment:
            - Rated power of hydraulic motor: 11 kW
            - Total installed power: 19.1 kW
            - Electrical connection: 80 A
            - Hydraulic oil filling: 230 litres

            Dimensions and weights:
            - Net weight: 3,180 kg

            - Operating hours approx.: 90,000

            Equipment:
            - 2x core pull
            - Connection for NVD mould 1x pneumatic, 1x hydraulic
            - 6-fold hot runner control
            - Piezo cavity pressure changeover
            - Handling interface

            plant is still in production and will be available from February 2024
            available. Viewing is possible at any time.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •