.

Bitte einen Suchbegriff eingeben - Lütfen bir arama terimi girin
Kategori:
    Üretici firma:
      makineler:
        tüccar:

          Fitting centre

          Machinelist: Fitting centre


          Fitting centre

          used Window production: wood Fitting centre RUCHSER RU-BM-3000 Flügelmontagetisch


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2659 · Fitting centre

          RUCHSER - RU-BM-3000 Flügelmontagetisch - - Vorfuehrmaschine -

          Technical details
          0 ja, freitstehend ︱Working width 3000 mm︱0 ja
          RUCHSER wing assembly table RU-BM-3000 year of manufacture 2022 ----------------------------------------------------- The Ruchser sash fitting center enables efficient production post-economic aspects. Thought through to the last detail, the system maximum ease of use. Important advantages for you: Modular system, according to your wishes and requirements Grand piano assembly table put together Easy to use, even for inexperienced workers Equipment demonstration machine, alternative/optional equipment on request! Item 1.0: Item no. : 0610000 RU-BM-3000, sash assembly table, for sashes up to a maximum height of 2500 mm with RU-SH, special screwdriver length 3000 mm, width 1400 mm, incline of Working platform manually adjustable. Holder for hardware scissors or hardware punch. 10 pieces swiveling commuters to hang the Wing, completely pneumatically foldable to unimpeded movement of the wings on the tabletop. Device for scanning the sash fitting length for a constant and variable/central grip position and any handle seat height for already pre-drilled Sashes, colored measurement recognition for the fittings. Commuter height at a stop optionally set to 50 or 60 mm adjustable. RU-SH, special screwdriver with pneumatic Depth switch mounted on trolley, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container Manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw planes mounted on the carriage. RA-4 commuter rail in depth manual adjustable to the left and right one each 4-fold revolver stop. PSF - Pneumatic clamping device for wings against the side stops. Working height adjustable from 900 - 1000 mm. Please also specify whether felt, sliding or brushes perform as a requirement. Item 1.1: Item no. : 0500000 Bracket matched to customer punch/- scissors.For installing a customer-supplied Fitting punch or fitting scissors (other brand) at the wing assembly table. Please specify make when ordering !!! Note: A Somatec punch is attached to this demonstration table. This can be purchased as an option. Otherwise, the punch must be provided by the customer (by the hardware manufacturer) Item 1.2: Item no. : 6309 RU-BM-... Siegenia fitting discontinued Alternatively also adjustable to other fittings! Item 1.3: Item no. : 0710000 RU-SBL3000/30 free-standing fitting bearing, length 3100 mm, depth 1250 mm, height 2050 mm, stand frame on the front without supports, 30 compartments, 10 pieces each in a row Divided partitions and a continuous shelf top, size of the compartments: width 280 mm, height 150 mm. ----------------------------------------------------- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)
            0 ja, freitstehend
            Working width 3000 mm
            0 ja
            Description :
            RUCHSER wing assembly table RU-BM-3000 year of manufacture 2022
            -----------------------------------------------------
            The Ruchser sash fitting center enables efficient production
            post-economic aspects. Thought through to the last detail, the
            system maximum ease of use.

            Important advantages for you:

            Modular system, according to your wishes and requirements
            Grand piano assembly table put together

            Easy to use, even for inexperienced workers

            Equipment demonstration machine, alternative/optional equipment on request!

            Item 1.0: Item no. : 0610000
            RU-BM-3000, sash assembly table, for sashes up to a maximum height of 2500 mm
            with RU-SH, special screwdriver length 3000 mm, width 1400 mm, incline of
            Working platform manually adjustable.

            Holder for hardware scissors or hardware punch.
            10 pieces swiveling commuters to hang the
            Wing, completely pneumatically foldable to
            unimpeded movement of the wings on the
            tabletop.
            Device for scanning the sash fitting length
            for a constant and variable/central grip position
            and any handle seat height for already pre-drilled
            Sashes, colored measurement recognition for the fittings.
            Commuter height at a stop optionally set to 50
            or 60 mm adjustable.
            RU-SH, special screwdriver with pneumatic
            Depth switch mounted on trolley,
            safety control, pneumatic height adjustment,
            Screw feeder with
            automatic shutdown of the filling container
            Manual insertion for a second screw length
            on the special screwdriver, accessories.
            RA-8, turret stop for 8 screw planes
            mounted on the carriage.
            RA-4 commuter rail in depth manual
            adjustable to the left and right one each
            4-fold revolver stop.
            PSF - Pneumatic clamping device for wings
            against the side stops.
            Working height adjustable from 900 - 1000 mm.
            Please also specify whether felt, sliding or brushes
            perform as a requirement.

            Item 1.1: Item no. : 0500000
            Bracket matched to customer punch/-
            scissors.For installing a customer-supplied
            Fitting punch or fitting scissors (other brand)
            at the wing assembly table. Please specify make when ordering !!!

            Note: A Somatec punch is attached to this demonstration table.
            This can be purchased as an option.
            Otherwise, the punch must be provided by the customer (by the hardware
            manufacturer)

            Item 1.2: Item no. : 6309
            RU-BM-... Siegenia fitting discontinued
            Alternatively also adjustable to other fittings!

            Item 1.3: Item no. : 0710000
            RU-SBL3000/30 free-standing fitting bearing,
            length 3100 mm, depth 1250 mm, height 2050 mm,

            stand frame on the front without supports,
            30 compartments, 10 pieces each in a row
            Divided partitions and a continuous shelf
            top, size of the compartments: width 280 mm, height 150 mm.

            -----------------------------------------------------
            Total price in this version: on request!

            See attached video and PDF brochure.

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Fitting centre Powasert Drehschrauber mit Zufuerung


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6290 · Fitting centre

          Powasert - Drehschrauber mit Zufuerung - - neu -

          Technical details
          - ︱Working width - mm︱ -
            -
            Working width - mm
            -


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Fitting centre RUCHSER Montagelinie Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6388 · Fitting centre

          RUCHSER - Montagelinie Video - - neu -

          Technical details
          Number of machnines - ︱Loading meters, approx. - ︱Total weight, approx. -
          Assembly line consisting of: Item 1.0 / 0610005 RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2.0 / 10603200 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3.0 / 614-601 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warranty 12 months excluding wearing parts Documentation 1-fold digital in German including CE declaration of conformity Item 4.0 / 10229018 Vacuum lifter with integrated electric chain hoist 90° / 200 kg for vertical and horizontal transport of flat, sealed glass panes. Vacuum generation with pneumatic ejector Push-off device for quickly releasing the plates and releasing the load only by double actuation (2 buttons) Safety vacuum storage including check valve is required by law. Audible safety warning device and vacuum pressure gauge with red/green area Energy saving device for vacuum generation and stroke safety circuit Pneumatic swivel unit with swivel range 90° Load capacity: 0-200 kg Lifting speed: 0-10m/min continuously using Frequency converter Lifting height: approx. 1.8m Operating voltage: 1x230V/50Hz Operating pressure: at least 6-7 bar of filtered compressed air Air consumption: approx. 1NI/sec. Weight: approx. 75 kg Painted in RAL 1018 zinc yellow Recording with a longitudinal beam and 4 pieces Suction plates D=290 mm Adjustment range, external dimensions of the suction plate Vertical 600-1000 mm Horizontally 800-1000 mm Comfort control The comfort control includes stepless raising and lowering through a frequency converter (required for gentle hanging up), All commands for the hoist and the vacuum lifter are in one common control unit - Special handling switch - housed. This makes it easier to operate the system and manage it Load possible in one-hand operation. Assembly - slewing crane and instruction on wing assembly table with aluminum screw machine Price on request! Packaging Price on request! transport Price on request! (Technical description according to manufacturer - no guarantee!)
            Number of machnines -
            Loading meters, approx. -
            Total weight, approx. -
            Description :
            Assembly line consisting of:

            Item 1.0 / 0610005
            RU-CBM 4000 work table
            with running rail extended by 500mm for additional assembly
            an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD
            with RU-SH special screwdriver, support table
            Length 4000 mm, width 1400 mm, inclination of the working platform
            manually adjustable. Holder for fitting scissors or fitting punch.
            16 pieces of swiveling counter-holders for hanging the wings, completely
            pneumatic
            Foldable for unhindered movement of the wings on the table surface.
            Device for scanning the sash fitting length for constant and
            variable/central gear seat for already drilled wings, colored
            Dimension recognition of the fittings.
            RU-SH, special screwdriver with pneumatic depth switch on carriage
            mounted, safety control, pneumatic height adjustment,
            Screw feeder with automatic shutdown of the filling container
            (Manual insertion for a second screw length on the special screwdriver upon
            request).

            RA-8, turret stop for 8 screw levels mounted on the carriage.

            RA-4, turret stop for 4 different wing widths
            Swivel table mounted.
            Pneumatic wing measurement sensing. operated, scanning range up to 2500mm
            simultaneous clamping of the scanning.

            PSF - Pneumatic tensioning device for sashes.
            Working height adjustable from 900 - 1000 mm.
            Support table covered with felt. Running rail extended to the left by 800 mm.

            Item 1.1 / 5035-1
            Pneumatic swivel device of the work surface with foot valve

            Item 1.2 / 0500000
            Holder matched to customer punch/scissors.
            For mounting a hardware punch provided by the customer or
            Fitting shears (third-party manufacturer) on the sash assembly table.

            Please specify make when ordering!!!

            Item 1.3 / 5597-7
            Driving device for RU-CBM on semicircular rails.
            The castors are on the left and right of the base frame
            of the table mounted.

            Item 1.4 / 6354-6
            3 double meters of semicircular rails 30 x 10 mm.
            Item 1.5 / 0730000
            RU-SBL3000/40 free-standing fitting bearing,
            Length 3100 mm, depth 1250 mm, height 2200 mm,
            Stand frame on the front without supports,
            40 compartments, divided into 10 compartments in a row by dividers
            and a continuous shelf at the top,
            Compartment size: width 280 mm, height 150 mm.

            Item 2.0 / 10603200

            RU-CSA-SMB aluminum holder screwing machine with automatic
            Screw feeding and manual feeding of the aluminum holders from one
            traveling box with pneumatic positioning device,
            Screwdriver with depth cut-off with 4-fold turret stop.
            Pneumatic adjustment device in the y direction against 2 pieces 6-fold
            Revolver attacks. Feed container for manual feeding of rotary holders
            or clip holder in square shape 18.5 x 18.5.
            The holder is manually pushed into a channel in the box and with
            positioned in front of the screwdriver mouthpiece using a pneumatically
            operated slide.
            Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm.

            Item 3.0 / 614-601
            RU-S48-A6-350 column slewing crane
            for chain hoist, with 6 m aluminum boom
            Version with column, smooth-running boom
            and sliding chassis for swivel and trolley travel
            manually by pulling and pushing the load.
            Projection 6 m
            Construction height 4,461 m
            Lower edge of boom 3.722 m (top edge of boom 3.9 m)
            Swivel range max. 270°
            Painting of the steel construction in RAL 7035
            The base plate is attached to the on-site hall floor
            At least 250 mm thick.
            Designed, of course, according to the valid STANDARD EN 13155
            Warranty 12 months excluding wearing parts
            Documentation 1-fold digital in German including CE declaration of conformity

            Item 4.0 / 10229018
            Vacuum lifter with integrated electric chain hoist 90° / 200 kg
            for vertical and horizontal transport of flat, sealed glass panes.
            Vacuum generation with pneumatic ejector
            Push-off device for quickly releasing the plates and releasing the load
            only by double actuation (2 buttons)
            Safety vacuum storage including check valve is required by law.
            Audible safety warning device and vacuum pressure gauge
            with red/green area
            Energy saving device for vacuum generation and stroke safety circuit
            Pneumatic swivel unit with swivel range 90°
            Load capacity: 0-200 kg
            Lifting speed: 0-10m/min continuously using
            Frequency converter
            Lifting height: approx. 1.8m
            Operating voltage: 1x230V/50Hz
            Operating pressure: at least 6-7 bar of filtered compressed air
            Air consumption: approx. 1NI/sec.
            Weight: approx. 75 kg
            Painted in RAL 1018 zinc yellow
            Recording with a longitudinal beam and 4 pieces
            Suction plates D=290 mm
            Adjustment range, external dimensions of the suction plate
            Vertical 600-1000 mm
            Horizontally 800-1000 mm

            Comfort control
            The comfort control includes stepless raising and lowering
            through a frequency converter (required for gentle hanging up),
            All commands for the hoist and the vacuum lifter are in one
            common control unit
            - Special handling switch - housed.
            This makes it easier to operate the system and manage it
            Load possible in one-hand operation.

            Assembly - slewing crane and instruction on wing assembly table with aluminum
            screw machine
            Price on request!

            Packaging
            Price on request!

            transport
            Price on request!

            (Technical description according to manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Fitting centre RUCHSER RU-BM 2500


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6843 · Fitting centre

          RUCHSER - RU-BM 2500 - - gebraucht -

          Technical details
          0 ja, 30 Faecher ︱Working width 2250 mm︱0 nein
          Ruchser RU-BM 2500 ---------------------- Fitting table with fitting shelf 30 compartments with olive drilling rig Uniqick 2000 screw magazine with feed to the hand screwdriver Selling ex location, can still be viewed in use! (technical information according to the manufacturer - without guarantee!)
            0 ja, 30 Faecher
            Working width 2250 mm
            0 nein
            Description :
            Ruchser RU-BM 2500
            ----------------------
            Fitting table with fitting shelf 30 compartments
            with olive drilling rig

            Uniqick 2000 screw magazine with feed to the hand screwdriver

            Selling ex location, can still be viewed in use!

            (technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 2.500 €
          Datasheet
          Request / Contact
          used Window production: wood Fitting centre RUCHSER RU-BM 2500


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6824 · Fitting centre

          RUCHSER - RU-BM 2500 - - gebraucht -

          Technical details
          0 ja ︱Working width 2500 mm︱0 nein ︱Dimensions (L/W/H) 3200 x 2000 x 2160 mm︱
          Ruchser RU-BM-2500 fitting center with fitting storage, mobile ------------------------------------------------------ Pivoting stops Pneumatic magazine screwdriver Fittings shelf 30 compartments with lower storage compartments Support table covered with felt Special screwdriver Screw feeder fitting punch Mobile table Wood thickness 90 mm possible. Customer processed Siegenai Titan AF fitting. Can be adjusted to other fittings. Overall dimensions with shelf approx.: 3200 mm x 2000 mm x 2160 mm Dimensions of work table approx: length 2520 mm, depth 1,370 mm (Technical information according to manufacturer - no guarantee!)
            0 ja
            Working width 2500 mm
            0 nein
            Dimensions (L/W/H) 3200 x 2000 x 2160 mm
            Description :
            Ruchser RU-BM-2500 fitting center with fitting storage, mobile
            ------------------------------------------------------
            Pivoting stops
            Pneumatic magazine screwdriver
            Fittings shelf 30 compartments with lower storage compartments
            Support table covered with felt
            Special screwdriver
            Screw feeder
            fitting punch
            Mobile table
            Wood thickness 90 mm possible.

            Customer processed Siegenai Titan AF fitting.
            Can be adjusted to other fittings.

            Overall dimensions with shelf approx.: 3200 mm x 2000 mm x 2160 mm
            Dimensions of work table approx: length 2520 mm, depth 1,370 mm

            (Technical information according to manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          RUCHSER - POWASERT -